Replacement Jack for 1997 Starcraft Meteor 814 Classic
Updated 08/05/2021 | Published 08/04/2021 >
Products Featured in This Question
Question:
I have a 1997 Starcraft Meteor 814 Classic tent trailer that we bought used about 12 years ago. The jack that was on there had a wheel, and was mounted in the center of the a-frame with an attachment that bolted onto the trailer. When the jack broke two years in, I replaced it with a side-mount marine jack with a wheel which is flimsy and about to break because I couldnt find an option to replace the original. The two pictures Ive attached show what I think is called the coupler, and the adapter attachment that would hold the jack. Can you help me find one that would work here? Thank you so much in advance!!
asked by: Jennifer S
Expert Reply:
We don't offer a replacement jack that would be compatible with the bracketry you show in your photo, but we do offer an option that would work for you.
Folks use side-mount jacks on A-frame trailers all the time, but as you found they're not very stable because of the tilting force placed on them because the load is off-center. I'd recommend replacing your existing coupler with part # CA-5100-Z which would provide a strong and secure mounting location for the jack. The coupler is a weld-on application but a professional welder would be able to install it pretty quickly at a reasonable cost. A trailer jack like part # TJA-2002-B would be a good, inexpensive choice. If you'd like to add a caster wheel, one is available as part # JC-102 or for a foot plate, you could use part # JF-99.
I've linked to some product videos for the parts mentioned above.
Product Page this Question was Asked From
A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson
- Trailer Jack
- Utility Trailer
- A-Frame Jacks
- Standard Grade
- 0 - 1000 lbs
- Manual Jack
- 15 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability of Trailer Jack with Outer Tube Diameter of 2 inches
- Q&A: Will Standard Battery Operated Drill Operate Lippert Quick Drop Tongue Jack
- Q&A: Replacement A-Frame Jack For Atwood Mobile Product Jack On Trailer With 2" Diameter Mounting Hole
- Q&A: Is Ultimate Trailer Jack Available With Higher Capacity
- Q&A: Can Andersen Ultimate 5th Wheel Connection Handle 2,880 lb Pin Weight
- Q&A: 2 inch Outer Diameter A-Frame Trailer Jack Recommendation
- Q&A: Recommended Anderson Ultimate Hitch for a 2018 Ram 3500 w/ the Factory Puck System
- Article: Can You Flat Tow a 2024 Chevy Blazer?
- Article: Best Bike Racks for Electric Bikes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Article: Most Popular Wheel Bearings





