Video Transcript for Texas A and M University Chrome Logo and State Emblem 2" Hitch Cover Review

Today we're going to be taking a look at part number AMG100567. This is the Texas A&M University chrome logo and state emblem two inch hitch cover. The hitch cover is going to allow you to represent your state and school pride, add a clean finished look to your hitch, and it's going to help keep dirt and grime out of the hitch. The hitch cover is going to be made from a steel construction. It's going to feature a black powder coat finish, which is going to offer great rust and corrosion protection. Here on the front we're going to have the chrome plated metal emblem.

It's going to feature a rust proof and fade proof design. It is American made. On the back side we're going to have a foam gasket. This is going to help reduce rattling between the hitch and the hitch cover. This is an officially licensed product. Really simple installation, you just slide this piece into your hitch, line up your pin holes, and secure with a hitch pin and clip or hitch pin and lock.

Those items are sold separately, so if you need a hitch pin and clip or lock you can find those right here at etrailer.com. The pin hole on this hitch cover is designed to accept a standard 5/8 inch diameter pin. A few measurements to go over with you real quick. The width of the face of the hitch cover is going to measure about five inches. The height is going to be about three and a half inches.

Then the distance we have from the back of that foam pad to the center of the hitch pin hole, that's going to give us about two and half inches. Again this is designed for a two inch by two inch trailer hitch receiver. That's going to do it for today's look at part number AMG100567.