Video Transcript for Ultimate Overview of the Oklahoma State University Chrome Logo Emblem 2" Hitch Cover

Today we're going to be taken a look at the Oklahoma State University 2 inch hitch cover from AMG. The hitch cover is going to allow you to show your school pride. It's going to add a clean finished look to your hitch, and it's going to help keep dirt and grime out of the receiver tube of your hitch. The hitch cover is made from a steel construction. It's going to feature a really nice black powder coat finish, which is going to do a great job at resisting rust and corrosion. We're going to have a chrome plated metal emblem here on the front. It's going to have a nice rust proof and fade proof design.

The product's made right here in the USA. Here on the backside it does have a foam gasket. This is really going to help reduce rattle in between the hitch cover and the hitch. It just slides over the shank just like that. The hitch cover to get it fully installed does require a hitch pin and clip or a hitch lock. Those items are sold separately, but if you need one you can find them right here at etrailer.com.

The pinholes on the hitch cover will accept a standard 5/8th inch diameter pin. The hitch cover face is going to give us an overall width, looks to be about 5 inches, with an overall height of about 3-1/2 inches. The distance that we have from the back of that foam pad to the center of the hitch pinhole it's going to be pretty close to 2-1/2 inches. This is designed for a 2 inch by 2 inch trailer hitch receiver. Very simple installation process.; all you have to do is slide it into the receiver tube of your hitch, push it in until you get your pinholes lined up and then secure it with the hitch pin and clip or a hitch lock. That's going to do it for today's look at the Oklahoma State University 2 inch hitch cover from AMG. .