bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: DT85MR
In Stock
$222.11
Retail:$320.73
You Save: $98.62
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number DT85MR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (163)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - DT85MR

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • 525 lbs TW
  • Draw-Tite
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Ball mount, pin and clip sold separately
  • Sturdy, square-tube design


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 525 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76396 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Installation Details DT85MR Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.5

163 reviews
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

It was easier to install then I thought it would be. I have already put my bike hitch on the receiver and it worked great.

Victoria H. profile picture
Etrailer Expert

Victoria H.

4/8/2025

I'm glad to hear everything has gone smoothly for you Dennis! Do you have any biking adventures planned for this spring yet?



by:
2021 Nissan Rogue

Etrailer is awesome to work with, I ordered the hitch I needed for my vehicle it shipped quick came with all the bolts needed and fit perfectly.



by:
2021 Nissan Rogue

You need to do a better job packaging. Every hitch I ordered from you needs paint touch up.



by:

Delivered quickly. Parts and instructions were comprehensive

Norm S. profile picture

Norm S.

2/24/2025

Perfect. No issues.

JesseM profile picture
Etrailer Expert

Jesse M.

2/24/2025

@NormS Perfect! Glad to hear your hitch is still serving you well. Come back anytime you need anything!


by:

Ordered this hitch and received it the next day. When installing, it slid right up in place and bolted right up. No modifications needed to install like many of the hitches I looked at. It looks like a good quality hitch that is well made. Thanks.



by:
2022 Nissan Rogue

I ordered this in anticipation of my week at the beach with family. I liked this one for the extra bit of bumper clearance and additional mounting bolts. I was stoked to see the hitch receiver available for a mid week delivery. When I got the notice it shipped, I got a later date and was bummed. I called Amy at etrailer and she confirmed this was accurate. I was pleased to find the delivery came earlier than expected and was able to install and use this with my newly purchased Kuat Piston Pro X and Curt custom wire harness! It is awesome so far. etrailer has never let me down yet!



by:
Nissan

I’m a retired foreman from a natural gas company.I’ve spent years around steel pipe ,welding etc. this hitch is made with good quality steel.the welds are very professional. Installed with a friend @15 minutes. Just laying on the garage floor..great hitch ,very easy to install .2021 Nissan rogue

Bill profile picture

Bill

10/9/2022

Trailer hitch has been perfect. Very good quality absolutely recommend it



by:

The hitch came wrapped in plastic and tape. It had several places where the paint was chipped off and all of the bolts, washers were missing.
I called immediately and they are having ship me the hardware, and I will have to touch up the black paint.



by:

Fit the car 2021 Rouge platinum., that's the main thing, all holes lined up and bolts fit, two big issues, the hitch blocks the rear hatch opening sensor, should have been built with a y style yoke coming together in the center. Also the stinger recepticle does not bend up and follow the lines of the bottom bumper trim. So it sticks out like a sore thumb. I bought a hidden hitch for my maxima that does that and gives better clearance and looks better.



by:

I purchased the hitch and bike rack from you guys for my wife's 2021 Nisssan Rogue. The instructions were easy to follow. Also, seeing the videos online helped a whole bunch. The end result was amazing... Will continue doing business with etrailer



by:

The quality of the product is very good, but packaging is very poor. All the paint was ground off the corners of the hitch. I will have to touch up the paint, to help delay rust from the winter roads. Luckily the wiring kit stayed in the box and didn't fall out of one of the gaping holes in the box. The UPS driver as said all their boxes look torn up.



by:

I bought this for my 2022 Nissan Rogue. It shipped righ away but the packaging was pretty beat up when it arrived. I did get it installed with a little effort. It works like expected. My only issue is with the design. It's sets very low below the bumper and often scrapes the ground. I think they could have raised it by at least a 1/2 inch.



by:
2024 Nissan Rogue

Installed myself in 45 minutes, perfect



by:
Pontiac Trans Sport Van

Tiene 1 año y si soporta el trabajo me gustó mucho.

After a year the hitch has done its job. I love it! And it’s helped transport 2 wheelchairs. Thanks!

Mario profile picture

Mario

4/23/2024

I enjoyed the product that I purchased. It still works very well a year later.



by:

Hitch is impressive, heavy duty. Installation, once we put it on a car jack and lifted it in to place things went pretty good. Like the 6 bolt install instead of 4.



by: 05/08/2025

Item is great but shipping good be bett er.



by:

Arrived in good condition and fit well. Installed with out any problems.



by:

Package arrived box was destroyed. I had to sand, prime and repaint parts of the hitch. I've order a few of your hitch's but never had one delivered like this.



by:

Works as expected. Easy to install.



by:
2021 Nissan Rogue

I chose the draw tite max frame receiver because it uses 6 bolts instead of 4 bolts to attach to the frame of my 2021 Nissan Rogue. The install was done by myself and it fit perfect, would recommend this hitch receiver to anyone wanting a quality product.



by:
2025 Nissan Rogue

Very easy install.



by:
2022 Nissan Rogue

This is the third hitch I have purchased from etrailer for three different vehicles. All have installed as easily as promised. Customer service has always been excellent!!



by: 07/16/2021

Clean and custom fit with no cutting or major tools required. Had install complete within 20 minutes of UPS driver drop off. No lift or Jack even needed, only a 3/4” wrench or socket is all that is needed here!



by:
2024 Nissan Rogue

Easy to install and looks great



by:

Exactly as advertised. No drilling required and very simple to install. It still looks good one year later. I only use it for holding a bike rack.


25
163
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • How Does a Hitch Being Installed Effect the Automatic Braking on a 2021 Nissan Rogue?
    The 2021 Nissan Rogue's have what's called rear automatic braking. It automatically applies the brakes and blares a screeching alarm if something is behind you. This is a great safety feature if you are backing up and someone walks out but it also is triggered by whatever you have connected to the hitch. There is a way to turn off the braking. You go to the driver menu, scroll to settings, driver assistance, emergency braking, rear and then toggle it off. As far as your lift assist function...
    view full answer...
  • Correct Trailer Hitch Fitment for a 2023 Nissan Rogue
    The Reese 51079 trailer hitch does not fit a 2023 Nissan Rogue and it doesn't look like it has ever fit a Rogue either. We don't carry Reese branded trailer hitch receivers but the equivalent to Reese is Draw-Tite and for a Draw-Tite hitch that fits your 2023 Nissan Rogue you need the part # DT85MR. I've attached an installation video of this on a 2021 Rogue for you to check out.
    view full answer...
  • Does the Draw-Tite DT85MR Fit a 2024 Nissan Rogue?
    Yes, it does! The Draw-Tite Hitch item # DT85MR has been confirmed to fit the 2024 Nissan Rogue. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I really like the Draw-Tite hitch item # DT85MR because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with ground clearance. If...
    view full answer...
  • What Is The Difference Between The Draw-Tite DT85MR And etrailer.com e93ZR For A 2021 Nissan Rogue?
    The Draw-Tite # DT85MR and etrailer.com # e93ZR Class III hitches will be evenly matched in weight capacities for your 2021 Nissan Rogue, so we can disregard the capacities for this comparison. Especially since your Rogue can tow, when properly equipped, up to 1,350 pounds and a maximum tongue weight of 134.9 pounds. The big differences will be the install. Neither require any drilling or trimming to get attached, but the Draw-Tite will need 6 bolts to attach to the frame and the etrailer.com...
    view full answer...
  • 2022 Nissan Rogue Hitch and Bike Rack Recommendations
    The Class III hitches we have for your 2022 Nissan Rogue include the Draw-Tite # DT85MR and the Curt # C24HR. I recommend going with the Draw-Tite over the Curt because it sits about 1/2" higher off the ground and the center of the hitch pin hole to the edge of the bumper on your Rogue will be about 4-1/2" as opposed to 6-1/2" like we see from the Curt. This means you'll have better clearance when it comes to your bike rack. If you don't already have a bike rack I highly recommend the...
    view full answer...
    Image 1 for
  • Recommended Hidden Trailer Hitch For A 2022 Nissan Rogue
    When installing a trailer hitch onto your 2022 Nissan Rogue I recommend The Curt Trailer Hitch Receiver # C24HR over The etrailer hitch # e93ZR and The Draw-Tite Hitch # DT85MR because The Curt Hitch has a concealed cross tube so after installing the hitch it will give it a clean out of the factory look with only the 2 inch receiver visible. When measuring from the ground to the upper inside edge of the receiver tube it measures out to be 11-1/4 inches. All three hitches have the same...
    view full answer...
  • Differences Between Available Class III Trailer Hitches for 2021 Nissan Rogue
    We offer the Draw-Tite # DT85MR, the etrailer brand # e93ZR and the Curt # C24HR Class III hitches, all of which will fit your 2021 Nissan Rogue. All three hitches have identical towing/tongue weight capacities of 3500/525 lbs. The Curt and the etrailer brand are nearly identical, with the only difference between the two is the finish, the etrailer brand hitch has a matte finish while the Curt hitch finish is glossy. Given the choice between the three, I'd personally choose the Draw-Tite...
    view full answer...
  • What is the Difference Between the Class III Hitches Available for My 2021 Nissan Rogue?
    When it comes to our class III hitch selection for your 2021 Nissan Rogue, we carry the following options: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR - Curt Trailer Hitch Receiver # C24HR - etrailer Trailer Hitch Receiver # e93ZR With these three hitches, all three of them come with a maximum tongue weight capacity of 575 pounds and a maximum gross towing weight rating of 3,500 pounds. As far as the ground clearance, the # DT85MR and # e93ZR both measure 11-3/4 inches from...
    view full answer...
  • Trailer Hitch Receiver And Wiring That Fits 2021 Nissan Rogue
    The Nissan Rogue underwent a design change model refresh for the 2021 model year, so a hitch and wiring can't be swapped from the 2018 model. So what you will need for a '21 Rogue is a new hitch and wiring that fits, and the best options are the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR - Curt T-Connector Vehicle Wiring Harness # C44ER I really like the Draw-Tite because it has a nice concealed look that helps your Rogue maintain its streamlined look; I have added...
    view full answer...
    Image 1 for
  • Best Trailer Hitch Receiver & Wiring Harness For 2022 Nissan Rogue
    For your 2022 Nissan Rogue the best trailer hitch receiver is definitely the option from Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR The reason I like the Draw-Tite # DT85MR over the Curt # C24HR is due to the better clearances. The Draw-Tite has 1/2 inch better ground clearance (11-3/4" to top of receiver compared to 11-1/4"), but significantly better bumper clearance, measuring 4-1/2" from hitch pin hole to edge of bumper compared to Curt's 6-1/2". This is important...
    view full answer...
  • Bolt Hole Spacing of Draw-Tite DT85MR Class III Hitch
    The inside to inside flange to flange distance of the # DT85MR Draw-Tite Class III hitch is 44 inches. Each mounting flange has 3 holes, the center hole is 2.87 inches from the mounting hole closest to the receiver tube, and the center hole and the forward-most hole are 6.59 inches apart. The hole spacing dimensioned are measured center to center. I've provided a photo showing these dimensions. The # DT85MR is a confirmed fit for the 2021 Nissan Rogue. If you'll be using the hitch for...
    view full answer...
    Image 1 for
  • Recommended Hitch for 2021 Nissan Rouge That Works With Hands Free Liftgate
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # DT85MR is a great option for a 2021 Nissan Rouge and what I recommend using. It should still allow for the hands free liftgate to be operational but you will need to now place your foot on either side of the receiver tube.
    view full answer...
  • Parts Needed To Carry Bikes On a 2021 Nissan Rogue
    The trailer hitch I recommend for a 2021 Nissan Rogue is the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT85MR which is a great bolt-on option with no cutting or drilling required. It will be great for towing or hitch mounted accessories like bike racks and cargo carriers. I have attached an install video I did below. In regards to parts needed, if you're using a bike rack or cargo carrier they will come with everything else. If you're towing, that is when you'd need a drawbar or...
    view full answer...
  • Should Anti-Seize Compound be Used When Installing a Hitch?
    We cannot recommend using anti-seize compound when installing the Draw-Tite # DT85MR on your 2021 Nissan Rogue. Though it is rare, bolts can back out when this is used. Especially when used to attach to something that will vibrate and move around a little when attached to the frame of the vehicle. I know that sounds kind of weird, but hitches are designed to flex a little with the frame of the vehicle when going over bumps or rough roads.
    view full answer...
  • Recommended Hitch for 2021 Nissan Rogue SV
    The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # DT23MR is confirmed to fit all 2021 Nissan Rogue models, including your SV. Unless you specifically want a 1-1/4" hitch, I recommend the # DT85MR Draw-Tite Max-Frame Class III 2" hitch instead. The 2" receiver is the most common size, and you will gain an additional 225 lbs of tongue weight capacity. I also recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C44ER if you plan...
    view full answer...
  • Will the Swagman Chinook # S64683 Fit My 2021 Nissan Rogue?
    Yes! The Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches # S64683 will fit your 2021 Nissan Rogue SL if you have a compatible hitch receiver installed and have proper bumper clearance. For a great compatible hitch that gives you enough bumper clearance, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - 2" # DT85MR. When installed on your 2021 Nissan Rogue, the Draw-Tite measures 4-1/2 inches from the center of the pinhole to the outside face of the rear bumper Since...
    view full answer...
  • Is a Class III Hitch Available for 2021 Nissan Rogue
    The Draw-Tite Class III hitch, part # DT85MR is indeed now available. The hitch is a confirmed fit for the 2021 Nissan Rogue. If you'll be using the hitch for towing, you'll also need a ball mount like # D-28, a hitch pin like # PC3, a trailer wiring harness like # C44ER and a trailer ball. For a 1-7/8 inch ball, use # 19260 or # 63845 for a 2 inch ball. I've linked to an install video for the hitch, as well as to installation instructions for the hitch and the trailer wiring harness.
    view full answer...
  • Trailer Hitch Recommendation For 2022 Nissan Rogue
    The etrailer hitch # e93ZR has not been confirmed for your 2022 Nissan Rogue, but I recommend The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # DT85MR. The hitch has a concealed cross tube, and has a black powder coat finish which covers the e-coat base which provides superior rust protection. The hitch has a gross towing weight up to 3,500 pounds and a gross tongue weight up to 525 pounds. I recommend checking your vehicles manual to get the proper towing...
    view full answer...
  • Install Video for Trailer Hitch that Fits 2021 Nissan Rogue SV
    We did have the chance to shoot an install video for the Draw Tite trailer hitch part # DT85MR which fits your 2021 Nissan Rogue. Since all of the hitches for your vehicle are pretty similar you could use this as a guide for the install of any of the other hitches we offer. I also attached install instructions for the Tekonsha wiring part # TK76FR which is very similar to the Curt for you to check out as well. Maybe you'll find those easier to follow.
    view full answer...
  • Does Reese Cargo Carrier Fit 2021 Nissan Rogue
    Definitely; so long as your 2021 Nissan Rogue has a 2 inch trailer hitch receiver like the Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR, the Reese cargo carrier will absolutely work and fit; the correct part is the following: - Reese Cargo Carrier for 2" Hitches # 63153 It won't block your taillights so you won't need the light kit, the only other thing you'll need is a hitch pin or hitch lock to mount it to your hitch, the Pin and Clip # 37201074 or Anti-Rattle Trailer Hitch Receiver...
    view full answer...
  • Comparison of Trailer Hitches that Fit 2022 Nissan Rogue
    For your 2022 Nissan Rogue I would recommend the etrailer hitch part # e93ZR because it has great towing capacities, is only option with a matte finish (others are glossy), and it has the best price. It's made by same company as the Curt # C24HR which only difference being this hitch has a gloss finish. The Draw Tite hitches like the # DT85MR have a tendency to not be as consistent in quality which is why we don't always recommend them first unless they have a distinct advantage or feature...
    view full answer...
  • Class III Hitch for a 2022 Nissan Rogue
    For your 2022 Nissan Rogue you are going to want the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT85MR. This hitch is custom fit and bolts directly to your Nissan's frame with included hardware. If you are need of a wiring harness to control your trailer's lighting functions I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK76FR. To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534....
    view full answer...
  • Trailer Hitch Receiver And Vehicle Harness Recommendations For a 2021 Nissan Rogue SV
    I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR for your 2021 Nissan Rogue SV. I have linked an video of the installation we did installing this receiver on a 2021 Nissan Rogue SV so that you can see the fitment for reference. The receiver is rated for 525lbs of tongue weight and 3,500lbs trailer weight. I recommend installing a Curt T-Connector Vehicle Wiring Harness # C44ER to give you a 4-way flat connector. With this connector you can add Auxiliary Lights # C53201...
    view full answer...
  • Will Draw-Tite Hitch Fit a 2025 Nissan Rogue Rock Creek
    Hey Martin, Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT85MR will fit your 2025 Nissan Rogue Rock Creek just fine. This is a really easy installation so it's a great opportunity for a DIY project if you're up for it! I'm attaching an installation video and a photo of the hitch installed on a 2023 Rogue for your reference. What do you plan on using the hitch for? I'd be more than happy to make additional recommendations if necessary!
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C
Employee Shane H
Test Fit:
Shane H
Employee Conner L
Test Fit:
Conner L
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Ethan H
Video by:
Ethan H
Employee Matthew G
Video by:
Matthew G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<