Bolt Hole Spacing of Draw-Tite DT85MR Class III Hitch

Updated 06/10/2021 | Published 06/05/2021

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(180)

$195.94

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1375)

$93.56

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(74)

$86.05

Question:

how far are the bolt holes on back of hitch on item DT85MR ?

asked by: Clarence H

Expert Reply:

The inside to inside flange to flange distance of the # DT85MR Draw-Tite Class III hitch is 44 inches. Each mounting flange has 3 holes, the center hole is 2.87 inches from the mounting hole closest to the receiver tube, and the center hole and the forward-most hole are 6.59 inches apart. The hole spacing dimensioned are measured center to center. I've provided a photo showing these dimensions.

The # DT85MR is a confirmed fit for the 2021 Nissan Rogue. If you'll be using the hitch for towing purposes, you'll also need a ball mount kit like # 989900 which includes 2 ball mounts, two hitch pins, as well as a 1-7/8 and a 2 inch hitch ball all of which store in a convenient storage bag. You'll also need a trailer wiring harness like # TK76FR.

I've linked to installation instructions for the hitch and the trailer wiring harness.

expert reply by: Mike L