See what our Experts say about this Draw-Tite Trailer Hitch

• Hitch Recommendation for a 2009 Chevy Cobalt Coupe
  If your 2009 Chevrolet Cobalt is not an SS then you would want a Curt Trailer Hitch, part # C11430. I attached installation instructions as well as a link to a video of this hitch being installed on a similar vehicle as yours below. If your Cobalt is an SS then you could use a Draw-Tite Hitch, part # 24756, like you referenced. I attached installation instructions and a video of this hitch being installed on a vehicle that is similar to yours below also. You may also be interested in...
  view full answer...
• Installation Time for a Hitch on a 2009 Chevrolet HHR
  For this particular installation I do not see a difference in the installation so I believe the difference is just in the amount of time the manufacturers stated at the time of engineering. The installation is essentially the same for all of the hitches (see link) offered for the 2009 Chevrolet HHR. I would allow a bit more time, maybe 1-1/2 hours, for the installation if working off of the ground without a lift.
  view full answer...
• Is There a Trailer Hitch for 2010 Chevrolet HHR With Heavy Tongue Weight Capacity
  The only trailer hitches that fit a 2010 Chevy HHR are Class I hitches with a 1-1/4 inch receiver, 2,000 lb towing capacity and 200 lb tongue weight capacity. The reason is because these vehicles simply don't have the capacity for that much extra weight, and aren't designed with that purpose in mind. Five hundred pounds is a very large amount of tongue weight, and the only vehicles that have hitches with that much capacity are large trucks or SUVs. The only option to transport a mobility...
  view full answer...
• Mounting Bolt Torque Rating for Draw-Tite Trailer Hitch Receiver # 24756
  The mounting bolt torque rating for the Draw-Tite Trailer Hitch Receiver, # 24756, is listed in the installation instructions which I have attached for you.
  view full answer...
• Choosing the Correct Trailer Hitch and Accessories for a 2008 Chevy Cobalt LT1
  For the 2008 model year, the Draw-Tite trailer hitch # 24756 fits the Sport, Sport Sedan, and SS Coupe models of the Chevy Cobalt. If you have a regular sedan or coupe model you would need the Curt hitch # C11430. The underside of each may look similar but the mounting locations and hitch design are different which is why there are different hitches for each. I have included links to the installation instructions for both hitches for you to view. If you require the first hitch, 24756,...
  view full answer...
• Will Kuat Bike Rack B202-114 Fit on a 2007 Chevy Cobalt SS Coupe
  The clearance for bike rack # B202-114 is going to be 7-1/2 inches from the center of the hitch pin hole to the back of the upright bar on the bike rack. To determine if this rack would have enough clearance to fit on your 2007 Chevy Cobalt, I recommend measuring from your hitch pin hole to a point past your bumper and any other items that might interfere with the bike rack installation. If this measurement is less than 7-1/2 inches, the Kuat bike rack would work well for your application. If...
  view full answer...
• Parts Needed to Tow a Trailer with a 2006 Chevy HHR
  According to the owner's manual for the 2006 Chevy HHR the maximum towing capacity of the vehicle is 1,000 pounds. If you are able to get the weight down to that then you can tow a trailer using the following parts: Trailer hitch # C11447 Ball mount # C45520 2 Inch Ball # C40018 or 1-7/8 inch ball # C40001 Wiring harness # 118407
  view full answer...
• Needing Receiver Hitch for 2008 Chevy HHR SS
  We do indeed offer two different Class I receiver hitches that are compatible with your 2008 Chevy HHR SS. I recommend Draw-Tite # 24756. If you were planning on towing, you might also need the following: A ball mount Wiring harness with 4-pole trailer connector, part # 118407 2 inch trailer ball, part # 19258 1-7/8 inch trailer ball, part # 19256 Locking hitch pin, part # e98879 When choosing accessories like a bike rack, make sure to choose a rack that is compatible with a Class I...
  view full answer...
• Trailer Hitch for a 2009 Chevy HHR SS to Use with Kuat Transfer Bike Rack
  I checked with Curt and trailer hitch # C11447 will fit your 2009 Chevy HHR SS model! You mentioned that you want to use the hitch for a bike rack. If you choose the Curt hitch then Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements. If you don't want to have to use the strap then I recommend the Draw-Tite hitch, # 24756, because it does not require the use of the...
  view full answer...
• Can a 2008 Chevrolet Cobalt Sport Tow a Small Trailer
  Yes, for a trailer hitch that is a confirmed fit for your 2008 Chevrolet Cobalt Sport I recommend the Draw-Tite Sportframe Trailer Hitch Receiver part # 24756 which is a custom fit so minimal modifications are required and it has a 2,000 lb gross trailer weight capacity. Therefore, you could absolutely tow a small trailer with this trailer hitch so long as the vehicle is also rated for it. In order to complete your towing setup you are also going to need a trailer wiring harness, the T-One...
  view full answer...
• Trailer Hitches that Fit 2007 Saturn Ion and 2005 Saturn Vue
  The two vehicles mentioned are different enough that they both require totally separate trailer hitch fits. For the 2005 Saturn Vue you would want the etrailer hitch part # e98865 but then the Draw Tite hitch for the 2007 Ion would be the part # 24756.
  view full answer...
• Trailer Hitch Recommendation for a 2011 Chevy HHR
  Curt and Draw Tite are not the same companies. Draw Tite and Hidden Hitch are made by the same company so they are basically the same. But Curt is it's own company by itself. For most vehicles all of the hitch manufacturers will go with a very similar design that uses the same installation points on the vehicle. In the case of your 2011 Chevy HHR all of the hitches do look very similar with a few minor differences. The hitch I would recommend is the Draw-Tite part # 24756 because it doesn't...
  view full answer...
• Hitch Recommendation for a 2006 Chevy Cobalt
  Based on the size of the food cart you have the only option I can recommend for you would be to install a hitch on your 2006 Chevy Cobalt like # C11430 or part # 24756 if you have an SS model and tow a small trailer. The dimensions of the food cart are too big to fit on a cargo carrier. The hitch I recommended comes with pin and clip. You will still need a ball mount. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). You will need to check the coupler...
  view full answer...
• Differences Between Trailer Hitch Receivers for a 2008 Chevrolet HHR LT1
  The differences between the Draw-Tite # 24756 and the Curt # C11447 trailer hitches for your 2008 Chevrolet HHR are that the Draw-Tite has a welded tab that keeps you from using Class II trailer hitch rated accessories and it doesn't have a collar while the Curt doesn't have the welded tab and it does have a collar. The Curt also requires the use of a stabilizer strap # 18050 for all non-trailer accessories like a bike rack or cargo carrier. Attached are installation videos and instructions...
  view full answer...
• Difference Between MaxxTow and Brophy 1-1/4 to 2 Adapter
  MaxxTow specifically lists their adapter as only being compatible with Class II hitches. Regardless of any dimensions that may suggest otherwise, this is the information that comes from the manufacturer. The Brophy # HT5R does not have this limitation. In addition to the Class I and Class II compatibility the Brophy has, there is also the quality to consider. The Brophy adapter is going to be a higher quality product when compared to the MaxxTow adapter.
  view full answer...
• Trailer Hitch and Wiring Recommendation for 2008 Chevrolet Cobalt
  We offer light-duty 1-1/4-inch Class I hitches for the various versions of the 2008 Chevrolet Cobalt. The correct hitch for your particular car will depend on which version you drive. You can use the linked page to select your vehicle style. Use the drop-down menu tool at the top of the page to choose your particular Cobalt. For example, for the standard coupe (not the Sport or SS) or for the sedan (not the Sport) use Curt # C11430. For the Sport or SS coupe use # 24756 if you need an...
  view full answer...
• Best Method To Haul 3 Or More Bikes On A 2011 Chevrolet HHR
  I do have an option that will allow you to carry more than two bikes on your 2011 Chevrolet HHR however, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24756 and Curt Trailer Hitch Receiver part # C11447 are the only two hitch receivers available for your vehicle. As they are both a Class I hitch receivers, you will be limited to carrying two bikes on the rear of the vehicle with a hitch receiver per the manufacturer's. The most cost effective options would involve the use of...
  view full answer...
• Drawbar Recommendation for a 2006 Chevy HHR with a Hidden Hitch # 60815
  I did a little research and found that the draw bar came with your Hidden Hitch Trailer Hitch Receiver with Drawbar, part # 60815 (no longer available), is the Sportframe Drawbar 4 inch Rise, part # 3594. Since your hitch is a Class I hitch it is not recommended that you use any drawbar other than the one that the hitch manufacturer recommends otherwise you will void your warranty. The reason they are very particular about using the right rise/drop drawbar is that if you were to get rear-ended...
  view full answer...
• How to Carry Four Bikes on 2008 Chevy Cobalt Sedan
  If your Cobalt sedan is a Sport Model, I would recommend the Draw-Tite Class I receiver, part # 24756. For a non-Sport model, go with the Curt Class I, part # C11430. However due to the very limited weight capacity of the Class I receiver, both the hitch and bicycle rack manufacturers all agree that any bike rack used on a Class I receiver should not be used to carry any more than two bikes. Carrying additional bikes can place the weight of the bikes too far away from the hitch, causing...
  view full answer...
• Replacement Hardware for Draw-Tite Trailer Hitch Receiver to Move it From Older to Newer Chevy HHR
  We do have just the replacement hardware for your Draw-Tite trailer hitch receiver, part # 24756. Use part # RHK and select Draw-Tite from the drop down menu and enter 24756 in the model number. This orders the exact same hardware that was originally included. I've included a link to a video of the hitch being installed for you.
  view full answer...
• Hitch and Trailer Recommendation for a 2011 Chevy HHR
  The only way you could transport a 500 handicap scooter with your 2011 Chevy HHR would be for you to install a hitch like part # 24756 and then use a small trailer. A cargo carrier setup wouldn't work because your vehicle wouldn't have the tongue weight rating to suspend the weight of your 500 lb wheel chair off the ground unsupported. To complete your towing setup you would also want a ball mount, the # 118407 for trailer wiring, # 19256 for a 1-7/8 inch hitch ball, and # 19258 for a...
  view full answer...
• Recommended Trailer Hitch Receiver For 2008 Chevy Cobalt LT 2 Door
  Your 2011 Chevy HHR has two trailer hitch receivers available which fit all trim levels of the HHR: the Draw-Tite # 24756 and the Curt # C11447. Neither of these two hitch receivers are confirmed to fit your 2008 Chevy Cobalt 2 Door LT. The correct receiver available for your vehicle is the Curt # C11430. I have attached an installation video for you. It is never recommended to use parts that are not designed specifically for your vehicle.
  view full answer...
• Does the Rear Bumper have to be Trimmed to Install a Trailer Hitch on a 2011 Chevy HHR
  If you have a 2011 Chevy HHR and it is an SS model, there is a small section that needs to be trimmed in the rear fascia for the hitch to fit properly. I have included a link to the installation instructions that shows where you would need to to trim. On non-SS models, you should not have to trim and the isntallation should be like the video I have linked. If you plan on doing some towing, the hitch comes with the proper ball mount, pin and clip. For a 1-7/8 inch ball use # 19256 and for...
  view full answer...
• Why Draw Tite Trailer Hitch Over Curt for a 2007 Chevy HHR For Bike Rack
  In general we recommend the Draw Tite hitches over the Curt for bike racks since Curt hitches require the use of a stabilizer strap when the hitch is carrying a non-supported load like a bike rack. So for a 2007 Chevy HHR the Draw Tite hitch part # 24756 would be the best option. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and...
  view full answer...

Do you have a question about this Trailer Hitch?