Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2020 Ram ProMaster 1500
These items fit your vehicle
2020 Ram ProMaster 1500
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is built for real towing and everyday use with a 5,000-lb maximum gross trailer weight and 750-lb maximum tongue weight. The 2" x 2" receiver opening fits the most common bike racks, cargo carriers, and ball mounts without adapters. Whether you’re pulling a small trailer or hauling camping gear, the square-tube design gives you the sturdiness you need for reliable towing.
You don’t need special tools or welding gear to get this hitch mounted. It’s designed for a direct bolt-on install using existing frame points, with all hardware included. The precision, robotic welding keeps everything square, so the holes line up right where they should. It’s an approachable weekend project even if you’re working in your driveway.
The gloss black powder coat finish layered over a protective base coat keeps corrosion at bay while giving the hitch a clean look under the bumper. That extra coating stands up to road grime, salt, and moisture so it stays looking sharp. The sturdy steel construction means it’s built to handle years of towing and gear hauling without flexing or rusting.
This Class III hitch lets you switch between towing and carrying gear in seconds. Use it with your ball mount for light trailers, or slide in a bike rack or cargo basket when you’re hitting the road for a trip. With a standard 2" receiver size, most accessories are ready to plug right in—no adapters needed.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
Great product. Installed on 2020 Blazer...Redline Edition. Video installation directions were spot-on. Only thing is the two holes in the end brackets needed to be about 1/8 inch bigger. The screws that go through the exhaust brackets on each side barely cleared and rubbed edge of metal as they were tightened, but did work. Other than that, it is a great product and i would definitely purchase again.
Perfect fit and installation video a BO NUS!
way to hard to install!!! and yes i have put on 3 or 4 trailer hitches. but this one is crazy!!!!
Hitch fit without any problems. Wiring harness was perfect. I probably should have watched the install video before the day of install but luckily I had the large step drill tucked away in the toolbox. Overall great product and great instructions.
Hitch was received and installed. Installation was straight forward and completed with no problem. I would recommend etrailer to anyone who needs a hitch
Hitch arrived via UPS with one end of the box blown out but all parts were inside. The issue was when I went to bolt up the hitch one end wouldn’t line up with the frame holes/carriage bolts. So I had to use a porta power ram in between the hitch bolt flanges to align the hitch with the frame holes. I have no way of telling if it was dropped on end and bent in shipment or manufactured this way. But i’d have been returning it if not for having a porta power handy.
Just what I needed and saved money over purchasing it from the Chevy dealer.
Great product. I installed this hitch on my 2020 Chevy Blazer by myself and everything went well. It would be easier with 2 people but it can be done solo. Fast shipping too. Etrailer has a YouTube video of the installation of this hitch to a Blazer which was quite helpful. Thumbs up!
The hitch is everything I could ask for. It is designed very well for my Blazer. Because it's concealed by a panel on the bumper, no one knows there's a trailer hitch
Thanks.
I got the trailer hitch for a 2020 Blazer. Worked great and a unique way to bolt up with the fish wire. The 2020 Blazer access holes had to be drilled out with a step bit. The carriage bolts head would not fit through the hole. Good thing I had a large step bit. Other than that it worked out great. The wiring harness fit perfect also.
Reciever was used on a 2021 Blazer and it fit perfectly and was easy to install. This is the second hitch that i purchased from etrailer and highly satisfied with both of them and the fast service
The holes for the exhaust doesn’t line up or fit. Had to make the hole in the hitch bigger for the exhaust bolts to fit. With two people you can install the hitch without lowering the exhaust system.
For functionality this thing gets an A+ fit and finish are great and the light pigtail was perfext. The only issue we have is the receiver is a little bigger than the standard 2inch and it bounces the hitch and trailer like crazy!
Great Hitch, but Watch Out! Not because there are any issues or anything. I say that because installing it was so easy, you'll get relatives that want one, too! Seriously, when one of my wife's cousins saw that the installation was so smooth, she convinced my wife I needed to install one for her! Hey, the learning curve made the second one even easier to install, but it was a warm day. Maybe install it in the garage with the door down... ;-)
Michael
6/23/2022
Still working great, flawless with no issues at all
I can’t believe the quick shipping service and the hitch is in perfect condition. It was a pleasure buying from this company.
Jeffrey
3/18/2022
Product is still doing awesome. It works like it did when I first got it. Thanks again for your great service!
I love the way the trailer hitch fits on my 2021 Blazer. It stays hidden. Its exactly what I wanted. Great product highly recommended.
Ed
3/13/2023
It is the Best! No problems at all. Ill always use your products.
High quality, fast shipping and easy in stallation.
The hitch receiver fits perfectly as advertised for our 2019 Blazer 2.5L.
A couple of comments about the installation ; if you have help, you do not really need to remove the exhaust if you remove the fascia screws and pulled it down and twist the hitch receiver at the right angle. Second, as an option to expand the larger chassis hole to make fit the hardware (and minimize rust possibility), shave the hardware a little bit with a grinder; the size difference is not too much (shaving the bolt head slightly in 2 sides, it will enter side-wise quite easy).
Jose M.
5/25/2021
After a year, the hitch works perfectly in our Blazer.
The hitch went on like a glove! The wire harness was plug and play! The optional bracket to hold the plug is great! It’s all installed and completely invisible behind the bumper shroud from the factory!
This is my second purchase with trailer, they know their stuff and treat you like family.
I highly recommend them!
great experience for ordering and research. installation video helpful. thanks
Installed great but the exhaust hanger didn't line up on one side.
goes into place pretty easy and you dont have to completely take apart the back end. I did have to drill out a couple spots on the frame with a step bit for install but other than that it was fairly straightforward. no problems with performance.
Works great!
I have picked up the product and it is what I expected. I have plans to have it installed tomorrow so I will know how well it fits tomorrow. Thanks.
All good. Everything, the hitch, wiring,instructional video, which made me know exactly what I had to do when installing and customer service. Really appreciated the extended customer service hours and the staffs knowledge.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
6/22/2021
Thank you for your review. It sounds like your hitch was a bit flexed. I will attach a help article about it:
Helpful Links
faq-my-trailer-hitch-doesnt-fit.aspx