Trailer Hitch Receiver Fit For 2024 Chevy Blazer

Question

Question:

is there a 2 inch hitch for 2024 Chevrolet Blazer??

asked by: Robert D

0

Expert Reply:

Yes, there is a trailer hitch receiver fit for your 2024 Chevy Blazer (so long as it is not the Premier model); I verified this fit directly with the manufacturer for you. The correct part is the following:

- Curt Trailer Hitch Receiver # C13418

If you also need a 4-way wiring harness the correct part is # C56325.

expert reply by: Kyle S

0

Answer 1

I checked with Curt and as of Friday, they changed their fits and have confirmed that the Curt #C13418 hitch will work on the 2019 Chevy Blazer RS. The only Blazer model that this hitch won't work on (or at least hasn't been confirmed) is the…

view full answer...

Answer 2

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 3

The Class III Curt trailer hitch part #C13418 that you referenced has a 5/8 inch diameter hitch pin hole which is standard for the 2 inch hitch size. So the Curt anti-rattle device 22323 part #C69HR would fit.

view full answer...

Answer 4

I highly recommend the Curt Trailer Hitch #C13418 for your 2020 Chevy Blazer over the Draw Tite part #76023 for two big reasons. The Curt has better towing capacities and is much easier to install! It also looks really great as it fits through the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Michael, the correct picture of the etrailer base plate kit part #e96GV is the first picture which closely resembles the Demco. I would agree this install requires the least amount of vehicle modification but there is some trimming required. Some…

view full answer...

Answer 7

Hello Andrew. It looks like our installers have not had the privilege of doing an install on a 2025 Chevy Equinox. I see that the wiring harnesses that we do have in stock have the 6 pin connector. It looks like Curt is aware of this issue and is in…

view full answer...

Answer 8

Hey Richard, thanks for reaching out! The etrailer Trailer Hitch Receiver #e36YR is my hitch recommendation for your 2021 Chevy Blazer because of the matte black finish. This finish makes it more durable than the classic glossy black finish we see…

view full answer...

Answer 9

Hey Michele, Yes, there were no design changes to the 2024 models so the Curt Trailer Hitch Receiver #C94NR would still be a compatible fit for your 2024 Buick Envision. If you need trailer wiring as well then you would want the Curt T-Connector…

view full answer...

Answer 10

Based on how tight of clearance there is between the MultiPro tailgate and the rear hitch of the new Chevy trucks fixed ball mounts won't have the needed clearance. Instead you would need to go with a B and W Tow and Stow designed for this…

view full answer...

Answer 11

I attached a picture of what the Draw Tite hitch part #DT54GR will look like when installed on your 2021 Cadillac XT6. It looks like it fits into the rear bumper cover opening you mentioned.

view full answer...

Answer 12

Yes, you can absolutely pull a 1500 lb trailer with a 2021 Chevy Blazer. Looking at the online owners manual for the Blazer it looks like there is some variance in towing capacity across different models. For example, Blazer 3LT and Premier trims are…

view full answer...

Trailer Hitch Receiver Fit For 2024 Chevy Blazer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching