Does the Curt Trailer Hitch come W/ the Fish Wire for Install

Question

Question:

Does this hitch come with the pull wires for the bolts that is shown in the installation video?

asked by: James A

0

Expert Reply:

Hey James yes, the Curt Trailer Hitch Receiver # C13418 does come with the pull wire! If there is anything else I can help you with, please drop a comment and let me know!

expert reply by: Bryce D

0

Jon G.

10/22/2025

Hey James, how did things go with the Curt hitch and the included pull wire? Your update could make it easier for the next person working on the same install.

Answer 1

Hello Dustin. I looked at the answer that you are referring to. The manufacturers have not been able to test fit at this time, so they do not have it listed. However, here at etrailer.com we have an entire team dedicated to our fit guide which is why…

view full answer...

Answer 2

For your 2016 Audi A4, I recommend the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise #HT5R. This will give you the additional ground clearance you need but will reduce the tongue weight capacity of your hitch by 50%.…

view full answer...

Answer 3

The Curt Wiring Harness part #C55593 that you referenced is a confirmed fit for your 2008 Mazda CX-7. This Curt harness has a modern style circuit board that has proven to be very reliable. If you need a hitch I would recommend the Draw-Tite #75512.

view full answer...

Answer 4

To determine if we have a wheel bearing that will be compatible, you will need to use a digital caliper and take some measurements of your existing spindles. If you reply with the B, C and D dimensions you find (as shown in the diagram I provided), I…

view full answer...

Answer 5

Yes, the carriage bolt blocks (they do look like spacers) and all install hardware are included with the Curt hitch part #13424. I attached a picture that shows all of the hardware that comes with the hitch. CM-SP6 is called out in the instructions…

view full answer...

Answer 6

The Curt Trailer Hitch, #12333, requires using the fishwire technique to get the bolts and block spacers into place. Removing them will be a little more difficult. You will have to push them up into the frame and try to guide them towards the access…

view full answer...

Answer 7

While grade 8 bolts like you have are recommended to install a class 3 trailer hitch, I do not recommend using the bolts in your picture. For a trailer hitch like the Curt #14001 you were looking at, it uses 1/2" x 13 grade 8 bolts. Hitch…

view full answer...

Answer 8

When using the included fishwire tool, also known as a bolt leader, when installing a trailer hitch like the Curt Trailer Hitch #C11386 that fits a 2008 Mazda 3, the bolt leader will simply thread on and off the bolts. There isn't a trick to it,…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Does the Curt Trailer Hitch come W/ the Fish Wire for Install

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching