See what our Experts say about this Redline Trailer Door Latch

• Recommended Replacement Lock/Latch For Avion Barman L-400 Lock
  The old Bargman L400 series locks you have on the trailer currently haven't been made for a very long time and apparently due to their rarity and how desirable they are people sell them for quite a bit of money when they can find them. I can't help you find those. For a similar handle lock you could use the Full Size Locking Steel Flush Door Latch # L3980. I recommend you consider the "Junior" Locking Stainless Steel Flush Door Latch with Inside Release # L1833 or # PLR5115 to allow the...
  view full answer...
• Trailer Door Lock To Fit a 2-3/4" x 3-3/4" Recessed Opening
  It sounds like you are looking for the "Junior" Locking Stainless Steel Flush Door Latch # L1883. This fits a 2-3/4" x 3-3/4" cutout and has a stainless steel construction. We also have it with an Internal Release # L1833 if you prefer to have that option.
  view full answer...
• Is The Plunger For The "Junior" Locking Door Latch # L1833 Sold Separately
  Hey Isaac, The plunger for the "Junior" Locking Stainless Steel Flush Door Latch # L1833 isn't sold separately so you would need to purchase the entire assembly.
  view full answer...
• Replacement Tack Room Door Latch for Horse Trailer
  We have a few options for door latches that might be good replacements for yours. There is the Bauer Products Manger Door Lock for Horse Trailers # BA95FR. This is designed for a vertical oriented door latch. We also have a horizontal opening style. That would be more like the "Junior" Locking Stainless Steel Flush Door Latch with Inside Release # L1833. If neither of these are the style that you have, feel free to send me a picture so that I can find a fit for your trailer.
  view full answer...
• Which Replacement Door Latch for 1991 Sooner Trailer
  The easiest way to find a replacement is find the dimensions of the hole that the latch sits it.The Flush Locking Stainless Steel Latch, part # L1833. The latch fits in a 2-3/4 inch by 3-3/4 inch hole and features an inside release. The larger # L3980 you referenced would mount into a 3-3/8 by 4-5/8 inch hole. It doesn't use an inside release, but you can easily add the # 4PLSP knob. Unfortunately, I don't have any reference material that provides any part numbers or manufacturers for...
  view full answer...
  
• Replacement Locking Door Latch for Tack Room Door on 1997 Circle J Horse Trailer
  I was able to find photos of many styles of older Circle J horse trailers and most do seem to use a flush door lock like # L1833 which fits into a 2-3/4 x 3-3/4-inch hole in a door up to 7/8-inches thick. The lock you referenced, part # L3980, fits a larger 3-3/8 x 4-5/8-inch opening in a door up to 1-1/16-inches thick. All such locks we offer are shown on the linked page. Just measure your door thickness and the dimensions of the lock opening to find the best replacement.
  view full answer...
• How to Mount Junior Door Latch # L1930
  Typically, the Junior Door Latch would install by routing or cutting out a 2-3/4 by 3-3/4 inch hole and would then either be bolted or riveted to the door through holes that would need to be drilled in the flange around the latch. The latch is meant to be used in doors up to 3/4 inch thick. Because the latch is a universal fit item with many different mounting possibilities, the mounting holes are not pre drilled and mounting hardware is not included. If you would prefer something with...
  view full answer...
  
• Locking Flush Trailer Door Lock Recommendation for a 1 inch Thick Door on a Cargo Trailer
  I have a solution for you, but the "Junior" Locking Stainless Steel Flush Door Latch with Inside Release # L1833 that you referenced can only fit doors up to 7/8 of an inch in thickness. For your 1 inch thick door you would want the Full Size Locking Steel Flush Door Latch # L3980 instead as this handle works on doors up to 1-1/6 inches thick. I attached a review video for this product for you to check out also.
  view full answer...
• Fitment and Compatibility of Replacement Lock Core for Tack Room on Horse Trailer
  Thanks for your picture. The lock you were looking at is designed by a tool box company, UWS, but it might work for your latch depending on the dimensions. Best thing is to measure. The # UWSLOCKCH501 has a diameter of .626 inches and length from under the lock head to the end of .676 inches when measured with a caliper like # PTW80157. I was able to find a replacement key and tumbler set for a latch lock more like the one in your picture. This new tumbler set # CHKT fits lock models...
  view full answer...
  
• How to Determine Size of Locking Door Latch for Horse Trailer
  We may have something that will work for you, depending on the size of your cut out and your door thickness, though we don't offer any parts specific to year, make and model of trailer. For an aftermarket handle, there are a couple of choices: the Full Size Locking Steel Flush Door Latch # L3980 will work so long as your door has a 3-3/8" x 4-5/8" cut out and is up to 1-1/6" thick. The other option is the "Junior" Locking Stainless Steel Flush Door Latch with Inside Release # L1833 which...
  view full answer...
  
• Replacing a Junior Locking Steel Flush Door Latch with Inside Release
  It depends on how the old one is attached to the door but you will likely have to pry it off. If there are no visible fasteners there wouldn't be any other way. You would have to be very careful not to damage the door in the process. When installing the new one I would put a screw in each corner which will require drilling the holes for the screws. Typically, the Junior Door Latch would install by routing or cutting out a 2-3/4 by 3-3/4 inch hole and would then either be bolted or riveted...
  view full answer...
  
• Locking Door Latch with Inside Release for a 1 Inch Thick Trailer Door
  I went out to the warehouse to measure the Junior Locking Stainless Steel Flush Door Latch with Inside Release, # L1833. Your trailer door would have to be no larger than 7/8 inches thick for the latch to fit. Instead, you could use latch # L3980. According to the manufacturer, this latch will fit a 1 inch thick door.
  view full answer...
• Can Trailer Door Latch # L1883 be Opened from Both Sides
  The Locking Stainless Steel Flush Door Latch, # L1883, has a threaded hole on the inside part in which you could insert your own knob so that it can be easily opened from inside. Another option is basically the same door latch that comes with the knob already in place. It is # L1833.
  view full answer...
• 1997 Bison BP 2H Straight Load Horse Trailer Dressing Room Door Latch
  The "Junior" Locking Stainless Steel Flush Door Latch with Inside Release part # L1833 is designed to fit a 2-3/4" by 2-3/4" opening. While I can't be for sure what size opening you have the Junior does offer the interior release to get back out. If your has a different size opening please let me know and I can advise you of options that fit.
  view full answer...
• Does Locking Stainless Steel Flush Door Latch Come With Gasket Or Strike Plate
  The Locking Stainless Steel Flush Door Latch, Part # L1833 does not come with a gasket or a striker plate. This is a flush mount latch and will fit in doors up to 7/8 inches thick. I have attached a photo of the latch with the dimensions. I have also attached a link to our product page for the door latches we offer.
  view full answer...
  
• Will the Redline Flush Mounted Door Latch L1833 Open from the Inside When Locked
  I ran out to the warehouse, and pulled one of the door latches, part # L1833 off the shelf. I can confirm that the latch will indeed open using the inside knob when the latch is in the locked position.
  view full answer...
• Can The Redline Door Latch, # L1883, Be Keyed Alike
  I called the supplier (Redline) and they said that all of the Redline Door Latch, # L1883, use the same key. Each latch will come with 2 keys. I also pulled 3 of them from the warehouse to verify that and they were all keyed the same. I also have the Redline Door Latch with Inside Release, # L1833, which is the same latch but with a knob installed on the interior side of the latch to provide an inside release.
  view full answer...
• Availability of Keyed-Alike Lock Cores for Locking Stainless Steel Flush Door Latch
  Locking Stainless Steel Flush Door Latch # L1833 from Redline can be re-keyed with a new tumbler and key set by using part # CHKT. This new tumbler set fits lock models # L1980, # L1930, # L1883 and # L1833. I verified this with my contact at Redline trailer supply.
  view full answer...
• Can the "Junior" Locking Stainless Steel Flush Door Latch be Locked/Unlocked from the Inside
  No, if you are inside the trailer you cannot lock or unlock handle # L1833 but you can open the latch. The lock can only be operated using the key and the key hole is only on the outside of the trailer.
  view full answer...
• Can You Replace the Lock Tumbler on the Redline Junior Locking Latch
  The lock tumbler can be replaced on the "Junior" Locking Stainless Steel Flush Door Latch # L1833. The Replacement Key and Tumbler Set for "Junior" Flush Latches # CHKT is the correct replacement for this. All of the "Junior" series locking door latches use the same lock and key. We do not have any alternate lock tumblers confirmed to replace the lock tumblers on the "Junior" series locking latches. This does not mean you can not replace them but I can not give you an answer one way or...
  view full answer...
• Can the Lock in Locking Stainless Steel Flush Door Latch # L1833 be Replaced with a Different Lock
  We do carry the replacement tumbler for Junior Locking Stainless Steel Flush Door Latch with Inside Release, # L1833. You will need Replacement Key and Tumbler Set, # CHKT. However, this is the same lock and key used in all of the Junior series locking door latches so it will be the same as what is currently on the L1833.
  view full answer...
• Available T-Handle Door Lock for 1-Inch Thick Door
  We offer Redline's Locking Stainless Steel Flush T-Handle Door Latch # L4080 which will work in a door from 1-3/8-inches up to 1-11/16-inches thick. Please see the linked video. It requires a 2-3/4 x 3-3/4-inch cutout. Two keys and a foam gasket are included. We also have part # L3980 that requires a 3-3/8 x 4-5/8 hole and fits door thicknesses up to 1-1/16-inches. Part # L1833 includes an inside release and fits an opening of 2-3/4 x 3-3/4-inches and door thicknesses up to 7/8-inch.
  view full answer...
• Door Latch Recommendation for Small Cargo Trailer
  As long as the doors are less than 1-1/16 inch thick the Latch part # L3980 would be exactly what you would want. These are a smaller latch that have locks built into them that are very reliable. For for a smaller setup we have the Junior Latch part # L1833. This is right at an inch smaller in width and length.
  view full answer...
• Overall Mounting Flange Dimensions for Redline "Junior" Locking Steel Flush Door Latch # L1833
  The overall dimensions of the Redline "Junior" Locking Steel Flush Door Latch # L1833 that you referenced can be seen on the photo I have linked for you. I pulled a piece from our warehouse and took the measurements you requested. The overall outside dimensions of the mounting flange are 3-5/8-inches x 4-3/4-inches.
  view full answer...