Trailer Door Latch

Hey Grace, yes it does look like we carry the handle #PLR158-100-A separate for the Cam-Action Lockable Door Latch w/ Split Bushings for Large Enclosed Trailers #PLR658-SSP. If there is anything else I can help you with, please feel free to drop a…

Hi Jeff; I'm sorry to say that the Bauer Products Manger Door Lock for Horse Trailers #BA83FR does not have a keyed alike option. Each latch will be keyed unique. We do not have a product that matches and comes keyed alike either so individual…

Hey David, I am not totally sure which two springs you are comparing but just because a dual spring torsion ramp door spring like the part #ERS160D96 has two springs doesn't always mean it has more capacity than a single spring. The springs can…

Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x 3/4" Tall x 1-1/2" Deep…

I do have an option for you but we don't carry Imperial products. That said, the Side-Door Bar Lock Assembly part #3057-55 would be an excellent replacement for this. The only real difference is the mounting pattern is not the same so some small…

Hello Arturo, Yes, the Master Lock Hitch Receiver and Coupler Latch Lock Set - Swivel Design - 2" Hitches #1481DAT will be a great fit for your Demco #DM15945. Good idea to keep things locked up and secure in the world we live in today. Any fun…

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of 9" Wide x…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The closest door latch we will have is the Redline Full Size Locking Steel Flush Door Latch #L3980. However, this will fit a 3-3/8" x 4-5/8" cut out and will measure 4-1/4" x 5-1/2" so it will end up being too small for your door.…

I did some research on the Bargman L-300 lock that you mentioned in your question, and it appears that these have not been made in a long time. Specific replacement parts for this particular line are no longer produced. If you are needing to replace…

Hey Bob, The B&W Digital Tongue Weight Scale #BW34KR still isn't out yet so we don't currently have that information. I reached out to B&W and they stated they don't have any info to release yet but that it should be on the market…

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

Hey Grace, yes it does look like we carry the handle #PLR158-100-A separate for the Cam-Action Lockable Door Latch w/ Split Bushings for Large Enclosed Trailers #PLR658-SSP. If there is anything else I can help you with, please feel free to drop a…

Hi Jeff; I'm sorry to say that the Bauer Products Manger Door Lock for Horse Trailers #BA83FR does not have a keyed alike option. Each latch will be keyed unique. We do not have a product that matches and comes keyed alike either so individual…

Hey David, I am not totally sure which two springs you are comparing but just because a dual spring torsion ramp door spring like the part #ERS160D96 has two springs doesn't always mean it has more capacity than a single spring. The springs can…

Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x 3/4" Tall x 1-1/2" Deep…

I do have an option for you but we don't carry Imperial products. That said, the Side-Door Bar Lock Assembly part #3057-55 would be an excellent replacement for this. The only real difference is the mounting pattern is not the same so some small…

Hello Arturo, Yes, the Master Lock Hitch Receiver and Coupler Latch Lock Set - Swivel Design - 2" Hitches #1481DAT will be a great fit for your Demco #DM15945. Good idea to keep things locked up and secure in the world we live in today. Any fun…

Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of 9" Wide x…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The closest door latch we will have is the Redline Full Size Locking Steel Flush Door Latch #L3980. However, this will fit a 3-3/8" x 4-5/8" cut out and will measure 4-1/4" x 5-1/2" so it will end up being too small for your door.…

I did some research on the Bargman L-300 lock that you mentioned in your question, and it appears that these have not been made in a long time. Specific replacement parts for this particular line are no longer produced. If you are needing to replace…

Hey Bob, The B&W Digital Tongue Weight Scale #BW34KR still isn't out yet so we don't currently have that information. I reached out to B&W and they stated they don't have any info to release yet but that it should be on the market…

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…