Replacement Tack Room Door Latch for Horse Trailer

Question

Question:

Do you have a door latch for a 1998 trails west horse trailer tack room door? I have a picture of it, cant attach to this inquiry.

asked by: Brittany G

0

Expert Reply:

We have a few options for door latches that might be good replacements for yours. There is the Bauer Products Manger Door Lock for Horse Trailers # BA95FR. This is designed for a vertical oriented door latch.

We also have a horizontal opening style. That would be more like the "Junior" Locking Stainless Steel Flush Door Latch with Inside Release # L1833.

If neither of these are the style that you have, feel free to send me a picture so that I can find a fit for your trailer.

expert reply by: Jacob H

0

Answer 1

The Reese Replacement Rubber Bumpers #30536 are intended for the side of the hitch closest to the cab. The pin head screw goes through the center of the rubber bumper and a speed nut goes through the bottom. I have provided links to the installation…

view full answer...

Answer 2

Overall length is just under 1 inch, it is .983 inches. Diameter of the base is all just under an inch at .987 inches. It is designed to fit a Reese 16K hitch, part #RP30047.

view full answer...

Answer 3

Thanks for the photos, Landa! The correct replacement for the window latch on your 2001 Featherlite Horse Trailer is the Bauer Products Manger Door Lock for Horse Trailers #BA55FR. Our specs say this fits a 2-3/4" wide x 3-3/4" tall but…

view full answer...

Answer 4

Hey Donnie, the closest fitting option we have would be the Full Size Locking Steel Latch #L3980 which was designed to fit cut out dimensions of 3-3/8" x 4-5/8". This would be close enough to what you have to work.

view full answer...

Answer 5

Yes, The Bauer Products Manger Door Lock #BA95FR can absolutely be used for a horse trailer down window latch, provided you have a 2-3/4" wide x 3-3/4" tall cutout.

view full answer...

Answer 6

From the images you attached, it appears you have what is typically used as a baggage/storage door latch. Because our entry door latches are designed for common RV door thickness of greater than 1", I suggest the Global Link Locking Baggage Lock…

view full answer...

Answer 7

For a 3,500 lb EZ Lube axle, the replacement spindle washer you will need is part #5-101. This washer has an inside diameter of 1 inch, so you may want to measure the spindle diameter to be certain. We do offer other replacement spindle washers, like…

view full answer...

Answer 8

In order to find a suitable replacement latch for your horse trailer you need to remove the old latch and measure the cutout as that's then going to tell you a compatible replacement. The Bauer Products Manger Door Lock for Horse Trailers part…

view full answer...

Answer 9

We don't have any offset jacks like the one you have on your 2002 Triton Trailer. I recommend going with the etrailer Round, Snap-Ring Swivel Jack #TJBB-2001-B as this jack will be more convenient as you will not have to reach down as far. This…

view full answer...

Answer 10

Based on my research, the CH751 number you mentioned in your question likely refers to the type of key it uses, and not a model number for the latch itself. We do have a large selection of door latches that might work well to replace your existing…

view full answer...

Answer 11

The #CHK510 key you mentioned is common to all #L1980, #L1930, #L1883, #L1833, and # L4080 latches. In order to get you the correct key, look on the face of the lock and see if there's a reference number engraved or stamped next to the key slot.…

view full answer...

Answer 12

The Locking Stainless Steel Flush Door Latch, #L1883, has a threaded hole on the inside part in which you could insert your own knob so that it can be easily opened from inside. Another option is basically the same door latch that comes with the knob…

view full answer...

Replacement Tack Room Door Latch for Horse Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching