Product Experts Available Now!
Call 1-800-940-8924
"Junior" Locking Steel Flush Door Latch with Inside Release
(109 reviews)
Price: $37.65
In Stock
Redline
"Junior" Locking Steel Flush Door Latch with Inside Release
Part Number: L1930
In Stock
$37.65
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (109)
- Q & A (0)
- Videos (1)
- Photos
Redline Trailer Door Latch - L1930
- Flush Latch
- Reversible
- Bolt-On
- Steel
- Keyed Unique
- Redline
- Built In Lock
Flush mounted latch with stainless steel spring, rustproof finish, locking cylinder and an inside release. Mounts in 2-3/4" x 3-3/4" hole.
Features:
- Plain, rustproof finish
- Inside release
- Replacement lock tumbler (CHKT - sold separately) is available
Specs:
- Mounts in 2-3/4" x 3-3/4" hole
L1930 "Junior" Locking Steel Flush Door Latch with Inside Release
Video of "Junior" Locking Steel Flush Door Latch with Inside Release
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for What to Know About the "Junior" Locking Steel Flush Door Latch with Inside Release
Ratings & Reviews
4.8
109 reviews
by:
Richard
10/03/2026
Perfect replacement
by:
C J’s Hot Rod Shop
04/23/2020
I chose this product after shopping on line and I’m very glad I did. I used 12 of these latches on my swap meet trailer. They are top quality and all use the same key. This makes setup and display quick and easy. Highly recommended!
by:
Carl J
05/09/2019
Latches are excellent quality. Trailer isn’t done yet, (upper sheet metal and latches yet to be installed), They are a great fit. This is going to be a swap meet trailer, lower diamond plate open for display shelves, upper open for canopy. Thanks
by:
James K.
06/19/2016
The latches work grate for the application. We made half doors for my jeep cj5. The latches are made really well and I like you can take the inside handle off. We welded them on the door and work grate all steel and no cheep plastic. I would recommend these latches.
by:
Jon
06/09/2013
This door latch is very well made, works great for my application. It arrived quickly, so my teardrop trailer project can continue without waiting for parts.
by:
David
02/24/2019
Part was exactly as described making custom installation perfect.
by:
Rocky
03/17/2022
I couldn't find this trailer door latch anywhere except on etrailer.com. It arrived quickly and was the exact part I needed. It comes bare metal to paint to your need. The original latch was welded in and took a lot of grinding and so on to remove it. I decided to drill holes and rivet the latch to make any potential future replacements much easier. It comes with two keys. Not the finishing photo, just a little primer paint for the moment. Thanks etrailer.com. This isn't the first time I've bought from them. They seem to have what local stores and other online places don't.
by:
Darla
06/08/2019
Bought latch as a backup for original latch that sticks sometimes that may need replaced in the future. Etrailer was the only site that had the exact same setup as the latch on my horse trailer which is 30 years old.
by:
John
03/15/2024
I’ve ordered from etrailer on several occasions and each time the product has been exactly as described. Shipping was extremely fast on my last order and will definitely order from them again.
by:
David
06/27/2017
Easy to install and works great. Now I have locks that work on my horse trailer tac door
by:
Greg M.
09/20/2016
etrailer,
Very happy with the product, delivery time was quick too ! Prices were the best I
had found after searching for a couple of evenings after work. I would buy from etrailer again and recommend to friends
i
Very happy with the product, delivery time was quick too ! Prices were the best I
had found after searching for a couple of evenings after work. I would buy from etrailer again and recommend to friends
i
by:
George N
05/07/2015
Exactly as described, quick shipping, fit perfectly!!
Well built..
Well built..
by:
Barry
11/02/2018
Door latch as described fast shipping easy transaction thank you barry
by:
Diana
12/17/2022
Parts are great!
Customer service and shipping communication was awesome!
Thanks
Customer service and shipping communication was awesome!
Thanks
by:
Mark
06/08/2023
was very difficult to install do to hollow door on trailer
once installed, it has worked great!
once installed, it has worked great!
by:
Smith
02/02/2017
The latch works as advertised. Its pretty heavy duty.
by:
Sarah
05/11/2022
As described. Product fits nicely on my 89' Will Ro trailer. Arrived fast. 4 stars only because it is a little scratched up.
by:
TIM
11/05/2016
GREAT PRODUCT, BUT WRONG FOR MY JOB. SERVICE FROM etrailer HAS GOT TO BE WORRYING THE COMPETITION.
by:
Summer
06/22/2020
I have not installed this item yet but have to say I received my order in a timely manner. Easy ordering online and fast delivery!
by:
Larry B. Glenrock Wy.
09/15/2016
Excellent service and speedy shipping
by:
Donald
05/21/2018
High quality at an extremely affordable price! Exactly the latches I had been searching for to finish off the doors of a homemade "snow cat".
by:
Zeitler
11/10/2019
Operates smooth. Seems to be a good product.
Zeitler
11/11/2020
Great.
by:
Terry
04/14/2019
Product does not work well. The opener get stuck in the open position.
by:
JG
11/19/2020
Used these for latches in homemade doors for my Polaris Ranger. They work great.
by:
James
04/26/2022
Perfect fit, easy to install, works great!
Thanks
Thanks
25
109
true
Show More Reviews
See what our Experts say about this Redline Trailer Door Latch
- How Far Past The Edge Does The "Junior" Locking Steel Flush Door Latch # L1930 Extend? As I see you were looking at the "Junior" Locking Steel Flush Door Latch # L1930 I can tell you the latch is going to stick past the edge of the latch by 3/8". This measurement is going to be past the edge of the cutout portion by 7/8" if that is where you are measuring from.
view full answer... - Replacement Tack Room Door Latch for CM Dakota Horse TrailerIt would appear that your CM Dakota horse trailer uses a door latch like the Locking Steel Flush Door Latch with Inside Release # L1930. I have included an image with the measurements for this latch. Please let me know if your latch is different than these measurements.
view full answer...
- Replacement Keys to Tack Room of 2003 CM 2 Horse Slant TrailerThe # CHK510 key you mentioned is common to all # L1980, # L1930, # L1883, # L1833, and # L4080 latches. In order to get you the correct key, look on the face of the lock and see if there's a reference number engraved or stamped next to the key slot. That number might help me find you a replacement key, if you can reply and let me know what the number is. Otherwise, if you can provide the dimensions of the rough opening the latches sit in, I can recommend replacement locks for you. Replacement...
view full answer... - Replacing a Junior Locking Steel Flush Door Latch with Inside ReleaseIt depends on how the old one is attached to the door but you will likely have to pry it off. If there are no visible fasteners there wouldn't be any other way. You would have to be very careful not to damage the door in the process. When installing the new one I would put a screw in each corner which will require drilling the holes for the screws. Typically, the Junior Door Latch would install by routing or cutting out a 2-3/4 by 3-3/4 inch hole and would then either be bolted or riveted...
view full answer...
- Fitment and Compatibility of Replacement Lock Core for Tack Room on Horse TrailerThanks for your picture. The lock you were looking at is designed by a tool box company, UWS, but it might work for your latch depending on the dimensions. Best thing is to measure. The # UWSLOCKCH501 has a diameter of .626 inches and length from under the lock head to the end of .676 inches when measured with a caliper like # PTW80157. I was able to find a replacement key and tumbler set for a latch lock more like the one in your picture. This new tumbler set # CHKT fits lock models...
view full answer...
- How to Mount Junior Door Latch # L1930Typically, the Junior Door Latch would install by routing or cutting out a 2-3/4 by 3-3/4 inch hole and would then either be bolted or riveted to the door through holes that would need to be drilled in the flange around the latch. The latch is meant to be used in doors up to 3/4 inch thick. Because the latch is a universal fit item with many different mounting possibilities, the mounting holes are not pre drilled and mounting hardware is not included. If you would prefer something with...
view full answer...
- Replacement Locking Flush Door Latch with Inside Release All the flush mounted latches we offer are pretty similar, with the differences being size of the hole they install in, the way the metal of the latch is finished, and whether they lock or not. To determine which latch you need, the best place to start would be to remove the latch and measure the hole it's mounted in. The 'Junior' latches mount in a 2-3/4 x 3-3/4 inch hole. The full sized latch uses a hole 3-3/8 x 4-5/8. I'm not entirely sure what the 'inside mounting' dimensions you...
view full answer... - Locking Trailer Door Latch with Inside Release for a 1 Inch Thick DoorYou can use the full-size locking door latch # L3980 for doors up to 1-1/16 inches thick. To add an inside release you will just need to add # 4PLSP.
view full answer... - Is There Recommended Mounting Hardware for Junior Flush Door LatchHey Fitz, we don't have recommended hardware for the Junior Latch part # L1930 but we can still help. This latch doesn't even have holes drilled in it so you would need to do that in the correct size so that you could either rivet or bolt the latch into place. That would really depend on your application so it really comes down to you coming up with what would work best for you. I've even seen one guy weld this latch on...which way are you leaning?
view full answer... - Availability of Keyed-Alike Lock Cores for Locking Stainless Steel Flush Door LatchLocking Stainless Steel Flush Door Latch # L1833 from Redline can be re-keyed with a new tumbler and key set by using part # CHKT. This new tumbler set fits lock models # L1980, # L1930, # L1883 and # L1833. I verified this with my contact at Redline trailer supply.
view full answer... - Replacement 4-3/4 inch Long Flush Latch on Horse TrailerBased on the dimensions you listed the correct replacement latch would be part # L1930 which is a junior size latch. This has the knob on back side of the latch. For one that has a flat back you'd want the part # L1883.
view full answer... - Can The Junior Locking Steel Flush Door Latch Be Keyed Alike?I called my contact at Redline, and they told me that they use the same lock and key for their flush mount door latches. So you could order 3 of part # L1980 and they would all be keyed alike. This latch has a stainless steel spring and a rustproof finish. The mounting hole size needed for this latch is 2-3/4 by 3-3/4 inches. If you determine you need a different size, as long as you order the Redline product, any number of the same item number will be keyed alike for their door latches. I...
view full answer... - Can Junior Locking Steel Flush Door Latch with Inside Release # L1930 be Keyed AlikeI called my contact at Redline, and they told me that they use the same lock and key for their flush mount door latches. So you could order 3 of part # L1930 and they would all be keyed alike.
view full answer... - Replacement Key and Tumbler Assembly for Redline "Junior" Locking Steel Flush Door Latch # L1930We have what you need. The replacement Key and Tumbler Set for the Redline "Junior" Locking Steel Flush Door Latch # L1930 is part # CHKT. This kit includes one tumbler and one key.
view full answer... - Can Redline Junior Locking Steel Flush Door Latch be Keyed AlikeAccording to our contact at Redline, they use the same lock and key for their flush mount door latches like the Junior Locking Door Latch # L1930 referenced in your question. If you decide to order 8-10 of these latches, they will all be keyed-alike. This will mount in a 2-3/4 inch x 3-3/4 inch hole. I have attached a short video demonstration on this product for you to check out.
view full answer... - Installation of the Junior Locking Steel FlushDoor latch, Item # L1930The Junior Locking Steel Flush Door Latch with Inside Release, item # L19730, is designed to fit through a 3/4 inch thick, or less door. At this time we do not carry door kits for enclosed trailers but we do carry hinges, door holders and other parts (see link) for enclosed trailers.
view full answer...
Do you have a question about this Trailer Door Latch?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Donald
5/22/2019
still working as advertised. I dont see a whole lot that is manufactured as well as these latches any more. Extremely impressed with the quality