4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
Item # 18252
Our Price: $29.19
Confirmed to Fit
2011 Ford F-150
without factory trailer connector
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (209)
- Q & A (0)
- Photos
2011 Ford F-150 - 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Universal Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
- 6 Feet Long
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wiring configuration below) and labeled
- Included circuit tester helps ensure wiring is correct during installation
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 72"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 18
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use the included tester to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
18252 Tekonsha Ford F-150 Wiring Harness with Ford F-150 End 4-Pole Connector Kit and Circuit Tester - 6' Long
20252 Alternate
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
- Wrong item was ordered
Customer Reviews
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252
Average Customer Rating: 4.6 out of 5 stars (209 Customer Reviews)
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.by: Vincent05/30/2019
2014 Smart fortwo
Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks
by: Tim C10/26/2019
Awesome product never any issues use along easy install practically don’t need instructions
by: Michael11/07/2022
Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.
Katrina B.
11/18/2022
I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.
by: Eric 05/22/2023
Chevrolet Corvette
This harness worked great for my Corvet te.
by: Brian03/14/2019
First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !
Mike L.
3/15/2019
We have a link to the installation instructions as well as some install videos on the product description page.
by: Tom08/23/2021
1990 Dodge Van
Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.
by: Russell04/03/2017
2006 Ford Focus
The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.
Russell
4/4/2018
The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!
by: Johnny12/16/2018
2007 Ford Focus
This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.
Mike L.
12/17/2018
On the product page, we have a link to the instructions as well as a couple of install videos.
by: David06/01/2019
1984 Jeep CJ-7
I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.
by: Timothy04/06/2023
Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.
by: Matt F03/09/2020
Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.
by: Timothy09/17/2022
1992 Dodge Van
Over all good experience
Missed the bolt package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you
by: Stan05/24/2018
1998 Chevrolet Blazer
Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.
by: Jeff G.06/10/2017
2005 Ford Focus
I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.
by: Mike D.05/06/2020
I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.
by: Kyle03/23/2017
2001 GMC Sierra
Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have
Kyle
3/23/2018
Perfect!
by: John11/13/2021
The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.
Jenny N.
11/16/2021
I will have our customer service team reach out to you.
by: Tony 05/30/2023
Their customer service is amazing and within a few day my order was here.
by: TJ06/27/2013
2006 Chevrolet Malibu
I watched the video online to install the wires and did it all by myself. Product arrived in good condition.
Tj
12/26/2014
No problems, whatsoever! Good product for the price. I especially loved the fact that one could watch the video online on how to install it. Thanks!
by: Gene08/15/2014
Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.
by: Frank07/08/2020
I purchased the Draw-Tite Receiver and wiring kit. All parts were easily identified. Good printed instructions. Everything assembled easily and fit perfectly. It took about 1.5 hrs to complete. It will be used to tow a small utility trailer. Highly recommend this equipment and etrailer.com. Thanks.
by: Mike K05/24/2018
2013 Ford Edge
Worked perfect. I used it to extend the pigtail on my tow dolly. etrailer has great shipping & service. Have bought from them many times.
by: Jason05/18/2020
Ordered a few weld on trailer hitch receiver tubes among other trailer parts. Parts were delivered in a timely manner and the quality of the receiver tubes is excellent. I will buy from this group in the future when I need trailer parts.
by: K Sally06/07/2017
Hummer H3
Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.
by: Arnie09/21/2017
4-pole Hardwire Kit with circuit tester.
I needed the kit to attach rear (break/lights/back-up/tail lights) assembly.
25
209
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- How To Install A 7-Way Trailer Connector On A 1994 GMC JimmyTo install a 7-way connector on the back of your vehicle you will first need to install a 4-flat connector and then use the Brake Controller 7 & 4 Way Installation Kit, # ETBC7, to hardwire a 7-way connector to the your vehicle. If you have the full size 1994 GMC Jimmy you will need to install the Curt T-One Wiring Harness, # C58044. This will give you a 4-flat trailer connector at the rear of your vehicle. If you have the smaller 1994 GMC S-15 Jimmy you will need to use the Draw-Tite...
view full answer... - Trailer Lights Go Out When I Apply Brakes on Tow Vehicle 2002 Toyota TundraIt sounds like there is a bad ground connection somewhere on the trailer because your lights are working when they are not put under a load. Whenever your tail lights are on and then you apply the brakes, the system is under max amp load, and with a bad ground the lights cannot support all the amps. I would start by checking the ground connections of the tail lights on the trailer to make sure there is a good connection to a clean metal surface. You will also want to inspect the wires to...
view full answer... - Installation Instructions Needed for Installing the Prodigy P2 and Wiring on a 1992 Chevy Astro VanWe have everything needed to install the Prodigy P2, item # 90885, on your 1992 Chevrolet Astro Van. You will need to start out with a 4-Way trailer connector at the rear of your vehicle. If you do not already have one you can use the 4-Pole Hardwire Kit Including Circuit Tester, item # 18252, to install one. Use the included circuit tester to find the correct functions behind the vehicle tail lights. Connect the white wire to a good ground, the brown wire to the tail light circuit, the...
view full answer... - Parts Needed to Add 4-Way to Fifth Wheel Trailer for Towing Second TrailerWhat you would need is the part # 18252. This is a 72 inch long 4-way connector that comes with quick-connects so that it can easily be attached to a trailer's taillight circuits. It would be just a matter of tapping all of the correct circuits for the wiring. Adding the 4-way to the vehicle would be pretty difficult and would require quite a bit of wiring.
view full answer... - Recommended Trailer Hitch for 2013 Keystone Sprinter Copper CanyonThe Adjustable Width Trailer Hitch Receiver for RVs part # 13703 is my recommendation for a 2013 Keystone Sprinter Copper Canyon. This is a frame mount hitch so you won't have to worry about a weak bumper connection. It installs via drilling and bolting directly into the frame and the universal design means there should be very little issues with fit. In order to hook up the lights you'll also need the 4-Pole Hardwire Kit with Circuit Tester part # 18252.
view full answer... - Brake Controller Recommendation for a 1992 Chevy 2500 TruckI have a solution for you, but there isn't a plug and play option for your 1992 Chevy Silverado 2500. ou will need to start with a 4-way (if you do not have one). For that you would want the # 18252. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake...
view full answer... - Brake Installation on a 1997 Chevy Astro VanThis vehicle has no provision for plugging in the brake controller under the dash, it will have to be hardwired. You'll need to choose a brake controller, the appropriate install kit, and a 4-way connector to tap into the van's lighting circuits. I'll give you a link to our Brake Controller Installation Guide. The links to the Install Guide and any other necessary parts can be found below.
view full answer... - What Size Spare Tire Will Fit With Curt Hitch on 2011 Ford F-250 Super DutyI contacted our representative at Curt and he informed me that the Curt Trailer Hitch Receiver, part # 14041, will not fit vehicles with a 20 inch wheel spare. So if the vehicle has a 20 inch tire, for example 245/55/20, it will not fit that vehicle. The 20 inches is referring to the diameter of the wheel, since the wheel is 20 inches in diameter and will require a tire with a larger diameter than tires for smaller wheels. Since you have an 18 inch wheel and 18 inch tire size, the Curt...
view full answer... - Will I Need To Trim Bumper and Lower Exhaust To Install Curt hitch C12272 on 2005 Chevrolet MalibuYes, for installation, you will need to temporarily lower the exhaust to install the Curt Trailer Hitch Receiver, part # C12272, on your 2005 Chevrolet Malibu. The best way to lower the hangers, is to apply some WD-40 to the rubber mounts to slide the hanger loose. You will not need to trim the bumper fascia of your Malibu sedan, but you will need to do a bit of drilling. I attached the install instructions for you to learn more. For a drawbar, you will need # C45521, and pin and clip...
view full answer... - Recommendation of 7-Way to 7-Blade and 4-Pole Wiring Harness on an RVThe Hopkins Adapter 4-Pole to 7-Pole and 4-Pole # 37185 can be a solution for you. But we don't carry an adapter to plug into your RVs existing 7-way trailer connector to give you both of the connectors you want. On the Hopkins adapter, the 4-Way plug isn't going to just plug into your RV so you're going to need to cut the 4-flat end of it off. Then you'll also cut off the 7-Way that's currently on the RV. After that you'll essentially wire the Hopkins adapter and the wiring on your...
view full answer... - Will Brake Controller Plug-In Adapter C51322 Fit 2004 Ford Expedition And 2004 Ford E-350The Curt Custom Wiring Adapter, part # C51322 is designed to work with the # C74VV brake controller and will fit both of your vehicles if there is a factory trailer connector installed on the vehicle. If you have a 4-way connector on either vehicle then you will also need part # 37185. If your E-350 does not have a trailer connector you will first need to install a 4-way connector like part # 18252. You will then need part # ETBC7 to get a 7-way at the back of your vehicle. If there...
view full answer... - Installing a Brake Controller from Scratch on a 2000 GMC Safari VanIn order to install the Prodigy P2 brake controller, # 90885, you will need to hardwire it using a 4 and 7 Way Installation Kit, # ETBC7. If you do not have a 4-Way already on your 2000 GMC Safari, you will need to install one first. You will need Draw-Tite Wiring, # 18252. This is a basic hardwire harness. Yellow is for left turn and brake, brown is for running lights, green is for right turn and brake, and white is the ground. I have included a video showing how this harness is installed. With...
view full answer... - Does the GM Brake Controller Adapter # 3015-S Fit on the 2005 GMC Safari VanThe GMC Safari Van is not equipped with brake controller wiring connector under the dash, like the GM full size truck and SUV is. Installing a brake controller on the Safari will require hard wiring a brake controller. We have a Brake Controller Installation Kit, item # ETBC7, that includes all of the wiring, circuit breakers and hardware needed to install a 7-Way trailer connector and a brake controller on your vehicle, as long as the factory 4-Way wiring is in place and working properly. We...
view full answer... - Installing 7-Way and Brake Controller on 1991 Chevy C/K 1500You will need to start with a 4-way on your 1991 Chevy 1500. For that you would want the # 18252. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake...
view full answer... - Will the Curt Trailer Hitch # C13365 Install onto my 2007 Ford F150 Super Crew Styleside BedYes, the Curt Trailer Hitch for the Ford F-150, 2007, part # C13365, can be used on all models of 2007 Ford F-150s, so it will work on your 2007 Ford F-150. I have attached installation instructions below for you to check out also. You may also be interested in purchasing the following: If your F-150 has a tow package, Plug-N-Tow (TM) Vehicle Wiring Harness, part # 40185 If your vehicle does not have a tow package, 4-Pole Hardwire Kit Including Circuit Tester, part # 18252 Ball Mount...
view full answer... - How To Tow a Motorcycle Trailer On The Back Of a 5th Wheel TrailerYes, for your 2008 Heartland Bighorn 5th Wheel Trailer I recommend using the Curt Adjustable Trailer Hitch Receiver part # C13701 which fits trailers with frame rails spaced between 18"-51" apart. The reason I recommend you use this hitch is because it has a higher towing capacity of 5,000 lbs than most other universal hitches of its kind so you will have more of a safety margin. In order to install the trailer hitch you have the option of either bolting or welding it to the frame. It has...
view full answer... - 7-Way to 4-Way Adapter RecommendationTypically 7-way connectors already have combined stoplight circuits so all you would need is an adapter like part # PK12716. The red wire of a 7-way is typically the left turn/stop circuit so you might verify with a circuit tester like part # PTW2993 that the red wire you found doesn't also carry the blinker circuit. Otherwise you would need to make an adapter using a converter part # RM-732, 7-way # H20043, and 4-way # 18252.
view full answer... - How Does Curt Spectrum Brake Controller Install on 1994 Chevy SilveradoYou'd have to hardwire the install of the Curt Spectrum Trailer Brake Controller # C51170 in your 1994 Chevy Silverado just like a standard brake controller as your vehicle does not come with any brake controller wiring from the factory.You will need to start with a 4-way (if you do not have one). For that you would want the # 18252. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install...
view full answer... - How To Use A Swivel Wheel Trailer on a 5th Wheel TrailerI do have everything you need to use a swivel wheel trailer on your 5th wheel trailer but we do not carry them nor do we have anything similar therefore you will need to source the trailer elsewhere. In order to use a swivel wheel trailer to haul your golf cart on a 5th wheel trailer you are going to need to install a trailer hitch as well as a 4-way trailer connector. The best trailer hitch we have for you is the Curt Adjustable Trailer Hitch Receiver part # C13701 which fits trailers...
view full answer... - Longest Vehicle End 4-Flat Plug and LeadThe longest available vehicle-end 4-flat plug and lead like the 48 inch Hopkins # HM48044 you mentioned is a 72 inch (6 foot) plug. There are two of these available, with one that comes with a circuit tester and splices and the other without. - 4-Pole Hardwire Kit with Circuit Tester # 18252 - 4-Pole 72" Long Vehicle End # 18172 For the latter kit - without the circuit tester and splices - you can connect the wiring with the Butt Connectors # 05731-5. I have added links below to video...
view full answer... - Will The Ford Replacement OEM Tow Package Wiring Harness Work on My 2002 Ford F-250 DieselThe connector at the rear of your vehicle may or may not be fully functional for the 7-way Ford Replacement OEM Tow Package Wiring Harness, item # 118242. If the connector is the same as shown on the product page you will need to use a circuit tester, item # PTW2993 if you need one, to make sure that all the wiring you will need to the connector is functional. If the connector was used before and was removed, then the wiring should be complete, and you should be able to connect the replacement...
view full answer... - Availability of a Trailer Hitch that Will Fit a 2004 Chevy Impala Super SportI spoke with my contacts at Curt, Draw-Tite, and Hidden Hitch. They stated that any of the available hitches for the 2004 Chevy Impala will fit the Super Sport model. The Curt Trailer Hitch, # 12252, that you have referenced is a good choice as it comes with the recommended ball mount, hitch pin and clip. I have included a link to the installation details below. If you plan on doing some towing, you can use hitch ball # 19258 (2 inch diameter) or # 19256 (1-7/8 inch diameter). For trailer...
view full answer... - What is needed for a complete towing package on a 1980 ElCaminoThe Curt Trailer Hitch, # C12005, for your El Camino does not come with the needed accessories to get you started towing. You will need the following items. Drawbar number 36061, Hitch Ball 19258 (2 inch) or 19256(1-7/8 inch), a pin and clip and a 4-way wiring harness kit 18252 to hardwire your vehicle for towing. I have posted links to these items below with current pricing.
view full answer... - Hauling Scooter With 1-1/4 Hitch ReceiverWe can give you the tools to achieve what you're wanting but your vehicle is limited when it comes to hitch sizes and capacity. Since you only have 1-1/4" hitch options we don't have a lot of towing options for your Challenger X Scooter. We also can't use an adapter for the hitch as it will cut down the capacity too much to where it could not handle the weight of your scooter. Best thing you can do is get a specific trailer for your scooter. If you have a 2005 Ford Focus hatchback or...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Sabrina W
Video by:
Alan C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent S.
5/31/2020
Just fine.