Do I Have To use All Bolt Holes of E-Track ATV Tie Down Kit

Published 10/02/2025

Products Featured in This Question

etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4

(289)

$40.19

Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set

(482)

$97.46

Question:

I noticed the Erickson ATV e track tie down kit, with straps and wheel chocks that the wheel chocks have been drilled to accept 6 bolts per chock. The e track backing plate kit e66RR includes 4 bolts per chock. Do I have to purchase additional bolts, or will the 4 bolts to chock suffice? Thanks Carl

asked by: Carl

Expert Reply:

Hey Carl, if you used just the 4 bolts per backing plate of the etrailer E-Track Backing Plates w/ Hardware # e66RR with the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV you would be fine. If you wanted to get more and run all 6 there wouldn't be any issues but a lot of that comes down to what the floor material is. With etrack if you are running the tracks directly to a wood floor with no backing plate we recommend using every mounting hole possible. If the floor is metal or using a backing plate then you can skip holes and everything will be fine.

expert reply by: Jameson C