# 1
Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs
One year review requested by etrailer.com. Box arrived extreamly tore up. Rack was obviously used but not damaged. I contacted etrailer who gave me a 30% discounted return. Racks held up well but I noticed a crack in the weld on one of the bars shown in the picture. I've put a 32' extention ladder on it a few times but ususally smaller a-frames and a 28' extention a couple of times. I'll get someone to fix the cracked arm. Overall I'm fine with the customer service and performance for the price. I recently removed the handy triangular hold downs for the past winter since I wasn't using the rack.
Thus ladder rack has been a very useful addon for my Nissan Frontier. I recently re-installed on a 2023 Nissan Frontier Pro and it went smoothly. My only criticism is that the hand knobs for the adjustable load stops are too small for the task.
# 2
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
I did install the Thule TracRac SR. I did it on my own and it went well. I'm really pleased with it. As for the photo, I will send you one, once I've washed my truck. Can't make a photo with a dirty truck. I will leave feedback later after some time with the rack.
These racks are simple to install and perform as expected. Pros are that they can slide all the way to the cab to get out of the way while not in use. Or can be totally removed if you need to park in a low clearance garage or want to go through the car wash. Cons are they can and will break if you back up against a tree limb or basketball hoop but that’s not really the racks fault now is it. The silver paint will inevitably start to chip off once the cast aluminum starts to oxidize after a few years. Kind of a bummer since otherwise they look nice.
# 3
Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Silver
Best rack on the market, and I’ve owned many! This is my second set of TracRac ladder rack systems. The first in 2006, and it was still going strong until I sold the truck with the rack on it, and now this one I purchased in 2022. Unfortunately, this will be my last one as it will take me into retirement, but it will live on with the new owner that buys this truck! Thank you for manufacturing such a good quality product. A+++++
The rack is slim and not overly gaudy for my Denali. But handles a decent amount of weight is quite sturdy for lumber and my 15' canoe.
# 4
Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Matte Black
Rack was a good fit for my 2016 Chevrolet Colorado and is solidly constructed and easy to install. Expensive but probably worth the money. No problem at all with black powder coating in screw threads, which many other reviewers complain about. I bought the Thule aero rack pads at the same time. They do not fit the rack properly and I’m disappointed that etrailer did not question the order and offer advice.
Rack is sturdy and well built. Took less than an hour to assemble and install. Maximum height of rack does not clear the top of the cab of a 2016 Ford F-350 SD Crew Cab. If you want to carry a kayak it will require foam blocks or Malone kayak saddles made for the Tracrac(not carried by etrailer). You can not carry a long ladder if used on this vehicle. Over all it is good rack though.
# 5
Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Silver
I ordered a truck rack Monday Sept 17th just after 8am pacific time. Within an hour I received an e-mail that the order was being processed. A short time later i received an e-mail that the order had shipped . I received my order on Friday the 21st. I have installed the Rack in my truck and it looks great. I am a return customer and would recommend etrailer to anyone in the market for any items they may need. Etrailer your great. Thanks for the fantastic service.
More expensive than other racks but I was impressed with the quality of the components, the directions and even the packaging. I wanted racks that I could adjust as low as possible to ease the loading of kayaks and just clear the cab. These adjust to just about any height you'd want in 3/4 inch increments. My only doubt is whether the C clamps that secure the bases to the bed rails might loosen over time.
# 6
Erickson Over-The-Cab Truck Bed Ladder Rack - Steel - 1,000 lbs
Great value full size ladder rack. Very impressed with the quality and how durable the steel frame is. 1-year in, haven't had any issues with rusting or loose bolts, which is what I have experience in the past from similar racks. Would highly recommend if you need a full-size ladder rack for a small to mid-size truck.
Easy assembly and installation I had to modify the J-bolts or buy different ones for my bed, but they were readily available at the hardware store. I use it for hauling lumber, steel, kayaks. It has been a terrific addition to my truck.
# 7
Erickson Truck Bed Ladder Rack w/ Load Stops - Steel - 800 lbs
Install wasn’t horrible but I can’t imagine removing it often. The stops naturally don’t slide on the rail but can be relocated without tools which is nice. Seems sturdy. The cons, it’s steel and has started rusting after two weeks in places the paint wore off during install. I will have to clean it up and repaint it to keep it from looking horrible. In addition, the J bolts sit pretty far off the side of my 2007 F150 so the bracket is hanging off the rim inside about an invh. Once all together it doesn’t seem to matter but would be more comfortable if it sat tight. Overall, it gets the job done but if looking for pretty, get something that doesn’t rust.
The product itself is of good quality. It is a heavy duty truck rack. They say it is adjustable but that is only if you have the wrenches with you. It took several hours to assemble it alone. The bolts need to be a little longer especially on the mounting sleeves and the top of the cross bars. The sliding mounts were quite difficult putting on as the sleeves were very tight, I recommend WD - 40. When it was to the point of installing the cross bars it was necessary to loosen the mounting sleeves and move them. I called customer service and sent several e-mails and received no responses . I plan on using it to carry my kayaks while pulling a travel trailer.
# 8
Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs
Fit perfectly. Was a little concerned that it wouldn't work with my bed cover. But it does and couldn't be happier.
This Thule Trac Rac with my BAK X4 Revolver is the perfect combo for my needs. The rack was an easy install on my 2020 F150, solid, quality and finish is premium. Karen at etrailer went the extra mile, I am traveling, she made calls and found a location for delivery near my location and took care of every detail. The Rack was shipped the next day and on my truck 6 days later. Another great purchasing experience with etrailer.
# 9
Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500 lbs - 68" Crossbars
The rack is great. Simple to install, extremely sturdy & very well designed. I drove it to Cars & Coffee yesterday & someone asked me what I needed to haul or if I merely installed them "because they look cool." The young lady, Janeth, that helped me was really great! Smart, polite, patient, & above all... knowledgeable about product. I would suggest selling the rack specific for Retrax bed cover. The amount of hardware left over when you add the adapter kit to the standard rack seems really excessive. Rather than be $169 add, it should be a deduct of at least that much.
Love the rack and after about a 4 hr install (DYI) it is easier than thought to raise the height up and down.
# 10
Thule TracRac TracONE Ladder Rack w/ Cantilever - Fixed Mount - 800 lbs - Silver
Had one broken piece and I called and they sent the part really quick. Orders ship fast and great customer service.
I am a contractor and just upgraded to a new Toyota Crewmax. While I love the truck I needed to solve the issue of hauling materials in a bed that was significantly shorter than the old truck. The Thule with the cantilevered extension was the perfect no-drill solution.
# 11
Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever - 1,250 lbs
Pretty good ladder rack. I like having the ability to slide the racks if needed. The install is doable. If you are installing the cantilever, make sure you swap out the top mount before assembling the top bar. The legs come pre-assembled with the regular top mount from the factory. The regular top mount has to be removed and the cantilever top mount installed to assemble the cantilever part of the ladder rack. Also, the bolts that hold the top mount on have loctite on them from the factory and are really hard to remove. I ended up stripping the bolts out. etrailer was very helpful and sent me a replacement hardware kit with all the bolts needed to finish the install. Between the directions provided and a few YouTube videos, the install was pretty straightforward. I am very happy with the product overall.
I bought these for my 2018 Ford F 150 5.5foot bed. These are definitely one of the more expensive ladder racks you can buy but totally worth it. Very high quality and easy to install. I bought these for the ease of removal. I use etrailer.com for all my vehicle needs.
# 12
Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500 lbs
Awesome product. Very sturdy. Will work with Backflip G2 cover installed
# 13
Thule Xsporter Pro Mid Overland Truck Bed Rack - Aluminum - 600 lbs
Bought this for my 2020 Toyota Tacoma and with the adapter kit (https://www.etrailer.com/Accessories-and-Parts/Thule/THXK4.html), it works perfectly for what I needed. Right now using it to haul two kayaks but eventually will be using it to haul a hardtop camper. Perfect midsize height. Very sturdy, somewhat easy to assemble (Thule instructions are pretty bare bones but once you get started it's pretty easy to follow).
It’s very well made, heavy duty. Looks good and should last a very long time. I’ve put my Yakima SkyBox 18 on it and we are ready for adventure.
# 14
Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Black
Ability to raise and lower the rack is very useful. It allows me to keep the boats as low to the ground/truck cab as possible for easier loading/unloading. I can raise the rear rack and load a motorcycle without removing it. I have removed the endcaps and run straps through the crossbars and was able to load two 17 aluminum canoes at once. Note, the endcaps are a bit delicate and extremely expensive to replace!
I recently made a 4 hour trip home after picking up a new kayak while using the following equipment for the first time: Thule Xsporter Pro Truck Bed Ladder Rack, Thule Hull-A-Port Kayak Carrier w/Tie-Downs - J-Style, Thule Watersports Adapter for Aeroblade/Aeroblade Edge Bars and Thule Bow/Stern Tie-Downs. I'm impressed with the performance of all of those components.
# 15
Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500 lbs
I installed the rack this morning with no issues. Simple process that took about an hour only because I am picky about everything being square, even and perfectly placed. I was surprised that the unit was as heavy duty as it is. I was expecting something much lighter in gauge of steel. It sits very sturdily on the truck with zero movement. Even my wife thinks it looks rather stylish (neither of us wanted the work rack look). Thanks for the great service and follow up after the sale to let me know it had shipped, you received notification of delivery, and how I liked the product and install. I've learned through experiences that this is the kind of service one can expect from etrailer.com.
I bought the Adarac Aluminum Crossbar Series Ladder Rack a year ago to use for hauling kayaks and it has worked well. It is sturdy, was easy to install, and looks decent on my truck. The paint has held up well. I was able to haul my kayaks from Pennsylvania to Florida and back with no problem. People have stopped me in parking lots asking about the ladder rack. I got a quality product at a reasonable price. The only negative thing I'll say is the ladder rack whistles sometimes. This happens when you get a strong crosswind but the noise is tolerable.
# 16
T-Rac Pro2 Truck Bed Ladder Rack for Full-Size Pickups - Fixed Mount - 1,000 lbs
The quality of the Thule T-Rac Pro 2 is very good and will last forever (never go back to steel). I have a short-bed GMC 2500HD and the storage space overhead for ladders, aluminum planks, 12 - 16 foot boards, etc. is a game-changer. However, I ordered extra load stops and M8 knobs direct from Thule and they did not include the screws to mount the stops (don't even list them in their catalog). I deduct 2 stars for Thule support being a pain
Really nice heavy duty rack. I was able to mount it on my Pace Edwards full metal Jackrabbit bed cover with Explorer rails. Just had to drill two holes in each mounting plate and grind some carriage bolts to fit in the slots. One complaint... I don't understand why one top rail has an opening in the slot for installing accessories and the other top rail does not. I have to take the end cap off to install anything.
# 17
Invis-A-Rack Folding Ladder Rack - Black Powder Coated Aluminum - 500 lbs
So far, so good. It arrived on time. The only things broken were two of the plastic "insert" pieces that go between the rails, but thankfully I only have a 5 1/2' bed, so I didn't really need them. I had it installed by the mechanics I was taking my truck to for other work and they said it installed pretty easily and one of the mechanics is going to get one for his own personal truck. We practiced setting it up and taking it down before I left. I can definitely do this on my own. I absolutely LOVE this product. I didn't want something that "whistled in the wind" or created drag every day even when I wasn't hauling the kayaks, so this is perfect. Thank you!
Great product. I use it to haul kayaks and lumber. It's surprisingly strong and sturdy. I put 300 lbs of lumber on it and never heard so much as a squeak. Installation was straightforward. I'll definitely buy another one for my next truck.
# 18
Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever - 1,250 lbs
# 19
DeeZee Customizable Truck Bed Ladder Rack with Tie-Downs - Side Mount - 200 lbs
Delivery was fast as usual. The installation does take a couple hours and is much easier with a second set of hands. I have a drop in bed liner on my F150 so I did have to do some cutting but my oscillating tool made that a quick modification. Make sure to use the no seize on the bolts so they don't heat up when cranking them into place. Lastly, there are NO drain holes in the bottom of the tubes and believe me they do fill with water and ice in cold temps. I drilled two 1/2 in. holes in the sides at the bottom so they can drain but if I realized there were no weep holes I would have drilled a hole in the bottom of each before installation. After drilling the hole, make sure to coat with a primer and some paint to prevent rusting. Other than what I encountered they will serve their purpose and seem good overall.
2021 Ram 1500I’ve been using this ladder rack for a year now and it has stood the test of time. I love the ability to remove the arms when I’m not using them so my tonneau cover can be closed. Highly recommended for the occasional need for a tough ladder rack.
# 20
Invis-A-Rack Folding Ladder Rack - Black Powder Coated Aluminum - 500 lbs
Very pleased. Exactly what we expected. Only issue is the driver side back plate that is glued on came off and is gone.
2016 Nissan FrontierI love that I don’t have to find a place in my garage to store this rack, and remove and replace it with each use. It’s fairly easy to load and tie down my canoe single-handed. The loaded rack is quiet and feels secure at highway speeds and on rough roads. Set up and take-down is quick and easy, and the bed-rail look is unobtrusive. The product has met my expectations in every way. Thanks.
Thule TracRac SR Sliding Truck Bed Ladder Rack Installation - 2020 Ford F-150
Ryan: Hey everybody, Ryan here at etrailer. Today on our 2020 Ford F-150, we're going to be taking a look at and showing you how to install the Thule TracRac SR Sliding Ladder Rack. So when it comes to ladder racks, there's a ton of different options available, and you're going to want to choose one that's best going to suit your needs. I will say I'm pretty impressed with this one for one big reason. And that reason really separates this rack from many of the others available. And that's the fact that our cross rails here are actually adjustable.So say if you have a small ladder or some pieces of lumber or something like that, you can actually push these two closer together and accommodate for that load.
Thule TracRac SR Sliding Truck Bed Ladder Rack with Cantilever Installation - 2020 Ford F-150
Ryan: Hey everybody, Ryan here at etrailer. Today on our 2020 Ford F-150, we're going to be taking a look at and showing you how to install the Thule TracRac SR Sliding Ladder Rack with Cantilever. So when it comes to ladder racks, there's a ton of different choices available on the market. And you're going to want to pick one that works best for you. You really can't go wrong with the Thule and that's because it's going to be able to handle just about anything you want to throw at it. Part of the reasoning is this cantilever here.
Thule TracRac SR Sliding Truck Bed Ladder Rack Installation - 2020 Ford F-150 TH43003XT
Ryan: Hey, everybody, Ryan here at etrailer. Today, on our 2020 Ford F-150, we're going to be taking a look at and showing you how to install the Thule TracRac SR Sliding Ladder Rack.And to complete this kit, you are going to need to pick up some Thule TracRac Base Rails, which are sold separately. When it comes to ladder racks, there's a ton of different options available, and you're going to want to choose one that's best going to suit your needs.I will say I'm pretty impressed with this one, for one big reason. And that reason really separates this rack from many of the others available. That's the fact that our cross rails here are actually adjustable. So say, if you have a small ladder, or some pieces of lumber, or something like that, you can actually push these two closer together, and accommodate for that load.Or if we have larger items, we're able to pull it all the way back, and again, accommodate for it.
Thule Ladder Racks Review - 2020 Ford F-150
Zack: Hey guys, Zack here at etrailer.com and today we're going to be taking a look at the Thule TracRac TracONE truck bed ladder rack system on our 2020 Ford F-150. This is going to be a solid way if you're looking to carry any kind of longer items such as ladders, lumbers, I even see people throwing kayaks and standup paddle boards up here. It's a great way to clear up some space in your truck, get it up there and secure it nice and still be able to use your truck bed for all those other things.Now, I only have this partially installed. It's held in place with these C clamps. It's a pretty quick and easy way, it doesn't require any drilling and what I like about it is it allows you to kind of adjust it if you want to but we like putting ours in this configuration we have today. So, essentially what you do is you take this bolt and connect it into that foot, and we'll just tighten those down.
What our customers are saying:
"The phone operator was very helpful and made my purchase easy. I will keep this website handy."