Best 2017 GMC Sierra 1500 Trailer Lights

The size was right, and the brightness of the LED light, let's people know there is a trailer in front of them, especially when braking, or making a turn

Much brighter than my previous tail lights. Easy to install. Would definitely buy again!

perfect ! great price , fast delivery !

Perfect fit. Just what I was looking for.

The lights came well packaged. All parts were included in a parts bag. I have some doubts as to the quality of the wiring connectors (3M 801). The white grounding wire is too short. I ran two additional lengths of ground wire directly to the lights and eliminated any trailer body induced grounding problems. The stainless bolts were 1/4" and I thought flat washers should have been included along with the stainless lock washers. I went to the local hardware store and purchased 4 each 1/4" flat washers to complete the installation. There was more than enough wire for my small PWC trailer. Installation was straight forward. The lights look very nice and are bright even in the daylight. Worth the purchase price.

DURABLE BRIGHT QUALITY. I've taken my trailer and these lights all around North America (California, Yukon, Texas, Key West, Newfoundland) they have never let me down.

Great product. It's an exact match to the one I replaced.

Going to lake and forgot to raise jack on trailer and bent jack at trailer and jack had a 45 degree slant / bend. replaced it with a " etrailer.com jack", more affordable than Walmart and Bass Pro !!!!!! Ordered reflective strips to place on back of boat motor , back of boat and trailer receiver. Etrailer.com prices are SO MUCH MORE lower than any other place I have found and / or shop at. With such a large inventory online, I'll be shopping here more often. AND shipping and service is FAST!!!!

Recently bought and refurbished trailer. Reflective tape went on easily and has held well! I was able to cut to size to fit between rails on trlr. I included a pic. at this point the trlr has close to 2,000 miles on it since installed and has been pressure cleaned once and not one loose piece of reflective tape.

These lights never disappoint. They are the perfect side marker/clearance light. These let everyone know you’re hauling something behind you. Especially at night. Also at night, I can see the lights on my trailer fenders through my door mounted mirrors perfectly. Thank you etrailer!!!

I purchased these for the side rail marker lights on our 20’ boat trailer. I liked the protection on the top and bottom of the lens. There are two lights in the picture. One on the fender and one on the side rail. I used the light that came in the kit to mark the fender and this to mark the side rail.

I needed a replacement for a utility trailer. Other aftermarket lights would require drilling & tapping. This unit actually has a ground wire rather than grounding through the unit body.

I recently decided to relocate the license plate on my new 5 X 10 aluminum trailer. It came from the factory with the plate located under the bed of the trailer where lifting the trailer caused damage to the plate and was difficult to see. I purchased the license plate light and began the process of relocation. The light now provides and excellent illumination for the relocated plate, was easy to install, and was very economical to purchase. Attached pictures reflect the finished product installed on my trailer.

Awesome , perfect , fast delivery !

These were designed as a clearance light application and at a great price. I bought them to use as turn signal lamps on my RZR. They are high quality and extremely bright when lit, so they work great for both applications. These guys have great parts at a great price and quick shipping. I would recommend them to anyone needing trailer/boat/lighting. Thanks guys.

I actually purchased these lights to use as a side marker light on my Jeep Wranglers after installing after market fenders. Lights have worked fantastic up to this point

Worked great on our motorhome.

Product worked perfectly for what we were using it for. I purchased a motorcycle and needed to move the license plate bracket to be able to add bags. I found your bracket online, knowing we were going to have to jerry rig it to where we wanted to mount it. I was a little suprised the bracket was plastic when I received it, but still worked great. A friend made 2 mounting brackets from a flat bar, cutting and bending them to the length and angle we needed. Drilled holes and mounted them under the rear fender. Mounted the license plate bracket on the other ends of the custom brackets and wired it in for lights.

I attached lights to my 34 Ford Coupe replica Streetrod golf cart. The original lights weren't bright enough. The Led lights fro etrailer were great and really bright. Wonderful service on all end talking on the phone and shipping items. Thanks for the friendly service and a great product.

I love the new taillights. I ordered mine for use with Lamin-X green lens tint film which gave it a green-mirror effect. Lights up bright red! I love the new look!

Replaced OEM incandescent tail lights in a Signature Ultra Lite trailer. The directionals in original lights were barely visible in daylight. the LED replacements are easily seen in sunlight and are exceptional at night. The upgrade was like for like, same screwholes and even used rubber gasket from originals. All in all very satisfied with product and ease of changeover

First unit arrived broken and was replaced by etrailer no problems. Many thanks to everyone at etrailer.

Nice lights. I have the 36 diode oval LED lights mounted on a flatbed truck as reverse lights and they are not near as bright as these 10 diode lights. I have the 10 diode lights mounted inside a 6ftx20ft stock trailer on a toggle switch. There is one at the front and one at the back. They give off plenty of light to load and unload horses and cattle in the dark. I would buy these again for the next trailer I rebuild. The team at etrailer.com is top notch as well. Your order will ship the same day and arrive in a timely manner. If it does not they will tell you why. Great people to do business with.

Product exactly as needed. Existing lamps last about 8 to 10 weeks as docking lights on my motorhome; there are four - one at each wheel. These lamps fit perfectly and are much brighter. My expectation is that these lamps will last more than a year(?) We'll see.

Direct replacement on my Circle J horse trailer fender.

These lights were exactly what I needed, I didn't find them any where else, I have an all Aluminum Trailer and they go on the fenders, as the law requires for trailers over 80" wide. Thanks for a good product at a good price and very reasonable shipping, I always use the USPS when I can.

Great service and people

Before installing these marker lights on my boat trailer, I touched the power wire and ground wire to the terminals on my truck battery. This light is at least 2X brighter and more vivid than the older LED lights that I am replacing. The older lights had a very suspect push on connector that would rattle off from road vibration. These Optronics have a sealed, through the back, power and ground wire. Far better!

These guys are good,we build a few trailers in our shop, & these guys have the inventory, you get it fast & you can get them on the phone, we need more outfits like this to do business with! Thanks Guy's--

A couple of years ago, I converted a single jet-ski trailer to a kayak trailer to hold my two kayaks, and installed new LED stop/turn/brake lights and clearance lights from etrailer.com. The lights worked great, and I used the trailer for a couple of years before I realized that I was missing a light for the license plate! I'm surprised I never got pulled over by the police! etrailer.com came to my rescue again with this great LPL31CB license plate light. It's very bright and really lights up the plate and the ground around the back of my trailer. Recently I added three more small red clearance lights at the back of my trailer, so the tailgaters and crazy drivers have no excuse about seeing my trailer! See the pictures! etrailer.com has great products, great service, and fast shipping!

The lights and fenders I purchased from etrailer.com were first rate just as described. This was a rehab of an older trailer with rusted fenders and rotted floor & sideboards. The pictures show an extra bracket installed on the top of the fenders. While this may not look perfect, it truly makes the fender a rugged reliable step for a full size adult.

Brighter than anticipated! Very nice and easy install. I broke one of my trailer lights due to a stray rock on a narrow road. This is a great replacement!!

Nicely done !

No problems looks like new after 1 year

Replaced all the clearance/marker lights on my 2007 RV. Nice upgrade to the LED and very easy installation.

I bought this to replace a broken original marker light on our 1995 motorhome. Pros - LED, sleeker look than original, easy to wire if you are familiar with wiring lights for vehicles/trailers, priced better than incandescent. Cons - The screw holes are closer together than my original fixture but I drilled a new pilot hole for the second screw and it was fine, the light sticks out further than the original, and I don’t like squatting or kneeling in order to fix things, anymore (but that’s just a reflection on me and not the light).

I bought a couple more of these two-diode LED clearance lights to add some more lighting to the rear of my kayak trailer. They work nice and are easy to install in 3/4" holes that I drilled through a piece of aluminum angle. The trailer has orange clearance lights on the front sides, red clearance lights on the back sides, the stop/turn/parking lights on the back, three red clearance lights on the back, and a white LED license plate light. It's really lit up and very visible at night from the rear and sides. Thanks to etrailer.com for great products and services! My wife and I like to kayak, but we don't like to deal with putting our kayaks on roof racks on the top of a car. So I bought a used Load-Rite trailer that was designed to hold one Jet Ski, and added a frame made of slotted angle and 2x6 lumber to hold the kayaks, and a cargo box from Tractor Supply to hold kayak seats, life jackets, towels, sun-protection clothing, and some spare gear (ropes etc), and bought all new LED lighting from etrailer.com. The paddles are too long for the cargo box so they have to go in the car! The kayaks are tied down to the trailer with several ropes front and rear, so there is a lot of safety factor in the design....I don't worry about the kayaks coming off the trailer! The entire rig works great....when we return from a kayak trip we just back the trailer in the barn and it's ready to go for our next trip. I put a 5" diameter wheel on the trailer just behind the hitch so I can push it around on flat level surfaces. See the pictures.

Great addition to the basic, rear brake lights of a camp trailer. I added these LED RED to the brake/turn function, within the existing, small holes in the rear bumper--much more apparent when stopping/turning. These sealed LED lights are very common on larger trucks and trailers now. Easy to install and very robust assembly...priced right!