Most Popular Turn for 2009 Toyota Highlander

I've had my 5' x 10' tilt bed trailer for almost eleven years ago. I mainly use it to haul riding mowers, and going to the dump. Replaced the lights about five years ago with a cheapo set of lights. They never were very bright, and only worked sporadically. These are a quality upgrade that should last a long time. Installation was straight forward and painless. And they're MUCH brighter than either of the previous incandescent sets.

Item arrived in very secured packing, shipping was fast, the quality is very good, I will buy again from you, Thank You.

Really cheap. These lights are marketed as submersible, but based on what's in the package I'm really dubious. The lens bodies are not sealed. As you can see My photo, each lens body has a clearance hole for the wire - No gasket, and plenty of room around the wire, So water will definitely flood in and submerge the contacts and bulb/socket If you put these on a boat trailer. Additionally, to Make the wire connections. They give you wire nuts. For submersible wire connections, at the very least, you should use crimp butts wrapped in tape - or better yet a heat shrink crimp butt. But they give you wire nuts, which aren't even really stable against vibration, let alone moisture. It does say 3-year warranty on the package, however, so I guess I'll be testing that out.

Product was exactly as represented. Ordering was easy and I was notified of status of my order. Would recommend to my friends. Charles

LIGHT WAS EXACTLY WHAT I WANTED...WORKS GREAT!

LIGHT WAS EXACTLY WHAT I WANTED...WORKS GREAT!

Installed the new lights today. Easy peasy. I grew up on a farm, in the country, and have been fixin' and futchin' with trailer lights since I was 6, it seems (I'm 74 now). Hopefully this is the last time I'll need to fix the lights on this particular trailer.

Just like every other order from e trailer was

They look great installed. Only recommendation I can make is to include crimp connectors at least for the side marker lights and perhaps a small length of protective wire wrap. All in all I’m very pleased.

Perfect fit and completes my trailer for full use

Great service and had the exact replacement tail lights for an older horse trailer that I was having a hard time finding. . It’s nice to order from a company that does and provides exactly what they say. Highly recommend.

I am very pleased with these lights. The lights on my trailer prior to this were dull and hard to see but these lights are bright and easily seen by cars behind me even during the day. Highly recommend.

As usual from etrailer, the product is as designed and works as it should. Shipping is slower than amzn and wmrt, but the tech support makes it worth waiting.

Bright, modern look, bright, well made. Standard plug made everything easy peasy.

The size was right, and the brightness of the LED light, let's people know there is a trailer in front of them, especially when braking, or making a turn

These look great and are bright. A bit difficult fit for replacing the old lights but the electrical connection was the same. Overall we are very happy with them. eTrailer was also awesome with the order process and very helpful

I had to replace one burned tail light on my 2005 cargo trailer. I bought two and replace the other one as well. They work perfectly. The size and the 3 pins connction are the same as the original. A little downside is regarding the packaging. I would expect each light wrapped individualy to avoid the rattling in the box. See pics.

Did have a problem with shipping never trust our us mail etrailer made good then some, will continue to do bussiness with them they have the same idea as my business every customer is important no matter what the $ is top notch company in my opinion! ! Will post pics of lights once my customer picks up trailer thanks again etrailer /mark . Ur company made a good choice in u

Inexpensive and easy to install. Mounted on a rough riding horse trailer and over thousands of harsh terrain, the lights work flawlessly.

I order a lot of stuff from Etrailer. I like the fast prompt delivery. I have however had two of these lights break the wires off right where they come out of the housing. Not long after installation. The wires were not hanging either.

Light was the same size as previous one on EZ Loader boat trailer. Easy to install and very bright. Original one made it 10 years and had moisture inside causing most of the LEDs to stop working.

This light is a good replacement on my 10 year old boat trailer. Several lights were out on the original equipment light, probably due to it being half full of water. Wires and mounting holes matched exactly which made installation easy.

I have 3rd set of optronics on one boat trailer and the second set on the other boat trailer. In the past year the boats were launched a total 12 times. These newer sets with the coated circuit boards and the 'lite pipes' are working better but not perfect. I have a few LEDs 'out on each side on each trailer. We lived in hope but I guess this is the best we can expect? Thanks Tom

Thus far a good light, I am using it as a rear foglight on my truck. It's been surviving the Florida rains, time will tell how it holds up to the elements, I'll write a follow up during our foggy season here. It's a bright light, not too large. My use may be unorthodox, but in the couple of weeks since I installed it still tests good.

It was an exact replacement and workded fine.

A perfect replacement for the one I broke and so cheap!

This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.

work perfect on hitch cargo carriers

I bought 3 lights (1) spare. I lost the brake light function on one about 9 months after installation. Lights are very bright and durable. Only negative, wires weren't labeled for function/usage.

work great

replacement LED for one that the turn signal guit working that was installed about 2 months ago.

Easy to install, great visibility from a long distance even in bright daylight.

This order arrived on time. And was easy to install with all the proper hardware. The web site said delivery by Thursday 8/29 and it showed up on Thursday evening. These really looked far better than the lights I replaced. I’m sure will get a lot of years from this product. Thanks again

The service was great and the parts were quality.

Lights were an easy, direct replacement for the incandescent factory lights that came stock on the trailer. Splicing was necessary but the wiring colors were accurate as this is the same manufacturer as oem. I am hoping the LED style last longer than the original. If not I will switch to another brand.

Direct replacement for the tail light that is broken. Thanks.

This product was looking for and you were the only to have it. Thank you

I installed these lights in a T@B teardrop camping trailer. The grommet would not work on this style trailer so I installed the lights using a silicone adhesive the same as the original Peterson lights. eTrailer delivered them in the same timely manner I have come to expect from them and the LEDs were easy to install. These lights are blindingly bright - simply amazing. I had rear lights with 1157 bulbs which I had upgraded to 2357 bulbs and equipped the tow vehicle with a powered converter but the light output was dim by today's standards. These lights are twice as bright on running lights and about 4 times brighter on the brake/turn signal elements. The thing we all fear when towing is being hit from behind by a driver that does not see our running, brake or turn signal lights in time. I know these lights will vastly improve the safety and visibility of our trailer. Thanks!

Did this improvement on my Tab trailer in under two hours. Great lights Excellent place etrailer good advise thanks Matthew Charlos