Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 4 fixtures. Includes a check valve to prevent backflow.
Features:
Specs:
A water pump is needed to get the water from your RV or boat's fresh water holding tank up to your faucets. This automatic pump from Seaflo not only performs this task, but it also ensures a consistent flow and high-volume output for up to 4 fixtures. This means you can run your shower and your kitchen faucet at the same time without losing pressure. It's also energy efficient and runs quietly.
There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically. Manual priming requires that you pour water into the pump, which can be inconvenient and messy. This pump primes itself, keeping you and your RV clean and dry.
Seaflo uses an automatic start-and-stop pressure switch that lets the pump run dry long enough to self-prime. If you turn your water on and realize you've unknowingly run your fresh water tank dry, the pump can run dry without damage while you shut the faucet and the pump off. The pressure switch also protects the pump motor from overheating when the water has been on for a while. So, if one of your kids leaves the faucet on, you're going to town with the washdown hose, or your teen takes a long shower (despite your asking them to conserve water), the pump will kick off when it starts to get hot. Once the motor has cooled, it will automatically come back on if the faucet or shower is still turned on.
To use this pump once it's installed, you only have to turn the water on!
Quick Tips: Some of our neighbors suggest unplugging this pump when you're traveling to prevent it from turning on accidentally if your faucets shake. And some of our feline-loving friends also recommend unplugging the unit any time you leave your cats unsupervised.
This pump can be installed on the floor, under a cabinet, or on the wall. Because this pump has a vertical, priming lift, you can install it up to 6' above your fresh water tank. Just make sure to measure 6' from the bottom of your holding tank. This is where the intake fitting will sit.
Once you've determined the pump's location, it can be secured to its new home with 4 screws (not included).
A filter is included to prevent debris from entering the pump. To install this, just screw it inline with the inlet port.
The fittings on this pump are male NPT ports. Screw the 1/2"-14 NPT hose barbs onto the pump fittings. The hose barb fittings have wingnuts to make it easy to turn the fittings by hand. Once you have the tubing (sold separately) in place on the hose barbs, add hose clamps (sold separately) for extra security.
Fill your fresh water tank and turn your water faucet on to clear the lines of air. The pump should kick on immediately, but because self-priming can take up to a minute to complete, give it a little time to start producing water at the faucet.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews

Thomas
11/11/2025
Works as expected. No leaks. Very quiet. Install it, forget it, done!


Larry
10/29/2023
We live full-time in our motorhome. Perhaps that is why we wore out 3 demand water pumps in the first 7 years. Now at the 2 year point with this pump and absolutely no problems to date. Very happy with this pumps functioning. I think SeaFlo got it right with this one.


Texas D.
8/27/2023
Has worked very well with no problems

Brooke M.
3/19/2025
These pumps are so great that you can really "sea" the difference with the water pressure!

Kate F.
7/13/2026
Thanks for taking the time to leave a review, Jamie. I'm sorry to hear you had trouble getting the pump up and running. Diaphragm pumps will make some noise during normal operation, but excessive noise or a pump that isn't working correctly can also be caused by things like trapped air, loose mounting, or an installation issue. I would check to make sure that it is secure to where you mounted it. Let me know if tightening it up does the trick.

Adriaan
12/29/2024
Great, still pumping at a high rate

Katrina B.
10/28/2022
That is a very common problem. The incoming city water pressure is too high. Incoming suction side pressure ideally should be 0 but no higher than 30 psi. There needs to be a regulator on the city water feed.

Katrina B.
11/1/2022
Thank you so much for the reply, I have put a regulator on hose and the new warranted pump works now!

Brooke M.
2/5/2025
Thats great! Are you getting ready for the upcoming camping season, Paul?
Do you have a question about this RV Water Pump?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.














Paul B.
2/3/2026
After a year the water pump continues to perform flawlessly. We just experienced 3 days of hard freeze in Orlando and were using our tank water rather than city water and the pump performed exactly as expected. Appears to be a really good replacement pump.