Do I Need a Relay to Install Seaflo 5.5GPM On Dual Switches
Updated 05/13/2021 | Published 05/07/2021
Question:
my aquajet 5305 original equipment did come with quick connects and currently available aquajet come that way also. thanks my two switches use a 10 amp intellitec relay that turn on pump by connecting to ground. so 12v is always at pump and is activated by switching to ground to complete the circuit. so question is does your pump need the 10 amp relay and does going to ground when switch is on work with your pump?
asked by: Richard O
Expert Reply:
I confirmed with my contact at Seaflo that the # SE24FR does not require any relays to be installed in this manner, and you can turn the pump on and off in this installation method.
Product Page this Question was Asked From
Seaflo Diaphragm Pump for Boats and RVs - Open Flow - 5 GPM - 60 psi - 12V DC
- RV Water Pump
- Diaphragm Pump
- 5 gpm
- 60 psi
- 17 Amps
- 6 Fixtures
- 12V
- Seaflo
more information >
Continue Researching
- Q&A: Water Pump Recommendation for 2017 Winnebago 2106DS
- Q&A: Does The GE Appliances Deluxe Plus RV AC GE37FR Include A Heat Pump?
- Q&A: Will SumoSprings Kit SS26MV Help Suspension of 2013 Heartland Cyclone
- Q&A: Can Advent Air RV AC Unit Control Furnace
- Article: Trailer Maintenance Schedule
- Article: How Does an RV Water Pump Work?
- Q&A: Does the R32 Advent Air RV Air Conditioner System ADV32SR Come w/a Heat Strip?
- Q&A: Replacement for Dometic Americana I DM2852 Refrigerator
- Q&A: What is Best Non-Ducted RV AC Unit for 2011 Jayco Skylark Travel Trailer
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Best RV Roof Vents
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Is It Illegal to Leave My Hitch on My Truck?