Can a Seaflow 12 Volt Water Pump Be Adapted To Run Off 110 Volt Power?  

If the wires from your trailer are good and the power is good, then we just need to figure out what each wire on the light itself does. The best way to do that is to take a 12 volt power supply and apply that to each of the wires on your lights to…

Hey Kevin, The wired systems we currently offer come with standard straight cables and would require you to purchase additional extensions in order to cover a 42' trailer and then the length of the vehicle. I personally prefer wireless systems…

The problem you are having is the check valve of your water pump leaking water and filling your tanks to the point of overfilling them. We actually don't carry the Shurflo brand so we aren't much help picking between the two models you have…

At this time there isn't a great all in one kit for TMPS and rear camera but I still do have some great options for you. For the camera system Furrion is the way to go. The base would be the Furrion Vision S Wireless RV Backup Camera System w/…

RV water pumps are all universal in what they can replace so what I would recommend as the best option for your 2020 Cougar is the Seaflo part #SE24FR as it has the highest gallons per minute flow rate of 5 GPM and has the highest water pressure…

I recommend going with the Seaflo Diaphragm Pump for Boats and RVs - Variable Flow #SE24FR you were looking at. It sounds like you got a lot going on and are going to need a pump to keep up with those demands. The 5 GPM (gallons per minute) pump…

No, the Seaflo Diaphragm Pump, #SE24FR is a 12 VDC pump that flows up to 5.5 gallons per minute and pressure setting at 60 psi. This is a variable flow based on demand, there is not an adjustable setting on the unit itself to make changes. If you are…

In regards to replacing the water pump in a trailer, we simply recommend replacing this with a unit that carries similar specs to the existing as that is what was chosen by the manufacturer based on the several factors such as line length, line size,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…