1. Accessories and Parts
  2. Spectro
  3. Wiring
  4. Fuse Holder
Spectro 12-Gauge Mini Fuse Holder - Qty 1

Spectro 12-Gauge Mini Fuse Holder - Qty 1

Item # SWC9545
lowest price pledge
Our Price: $6.12
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.05 lbs
Quantity: 
In Stock, Ships Today
Accessories and Parts SWC9545 - Fuse Holder - Spectro
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Watertight in-line fuse holder is designed for 12-gauge wire. Low-profile holder is used where neatness is desired. Fuse not included. Call 800-298-8924 to order Spectro accessories and parts part number SWC9545 or order online at etrailer.com. Free expert support on all Spectro products. Guaranteed Lowest Price and Fastest Shipping for Spectro 12-Gauge Mini Fuse Holder - Qty 1. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (2)
  • Q & A (9)
  • Videos (1)
  • Photos
  • Why etrailer?

Spectro Accessories and Parts - SWC9545

  • Wiring
  • Fuse Holder
  • Spectro

Watertight in-line fuse holder is designed for 12-gauge wire. Low-profile holder is used where neatness is desired. Fuse not included.


Features:

  • Watertight in-line fuse holder
  • Fits 12-gauge wire
  • Designed for a mini fuse (not included)
  • Use in locations where a low profile is needed
  • Quantity: 1 fuse holder
  • Made in the USA


9545 Spectro 12-Gauge Mini Fuse Holder - Qty 1





Video of Spectro 12-Gauge Mini Fuse Holder - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Spectro Wiring SWC9545 Review

Speaker 1: Today we're going to take a look at the 12 gauge mini fuse holder. This is for a quantity of one. Now this is a low-profile, in-line fuse holder, which is water tight. You can see it has this attached cap to it. So once you put your fuse in there, put your cap down, press it into place and it'll seal a fuse from the elements. This is designed to fit 12 gauge wire.

If you look on the wire itself, it'll say 12 gauge. This is inaudible 00:00:23 single mini-fuse, which we do sell separately on our website. Now this is used in locations where low-profile fuse would be needed. This is for a quantity of one fuse holder and it is made in the USA. That should do it for the 12 gauge mini fuse holder, quantity of one..


Customer Reviews

Spectro 12-Gauge Mini Fuse Holder - Qty 1 - SWC9545

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Watertight in-line fuse holder is designed for 12-gauge wire. Low-profile holder is used where neatness is desired. Fuse not included.

- SWC9545
by:

work great for me 674902



- SWC9545
by:

Great 237285


2
2

Ask the Experts about this Spectro Accessories and Parts

  • Is a Fuse Necessary When Wiring a 7-way If 12V Wire Already Is Fused
    If the truck has a 12V power wire dedicated to the trailer wiring that is already fused, you do not need to add an additional fuse. For example, on newer GM trucks, the 12V power wire from the factory tow package is ran to a 40 amp fuse in the fuse box. In this instance, it is not necessary to add an additional fuse. If you have to run a new 12V power wire, then we recommend adding a 40 amp circuit breaker, like # 9510, before the battery. If you would like to let me know the year,...
    view full answer...
  • Wiring Additional LED Lights On Yahama Royal Star Tour Deluxe Motorcycle
    You would need to install a switch for the lights from the 12V battery. Since you are installing LED lights, you should not have any problems with power draw. We do not carry switches that are specifically designed for motorcycle lighting but you may want to take a look at the product page I attached for the switches we offer. You can add an inline fuse holder like part # SWC9545. Each of the lights will need to be grounded to the motorcycle so I recommend ring terminals like part...
    view full answer...
  • Replacement Fuse Holder or Circuit Breaker for Use with Husky Brute Electric Trailer Jack HT87247
    You can use either a fuse holder such as Spectro # SWC9545 along with a locally-sourced mini fuse, or you can use a 30-amp auto-resetting circuit breaker # PK54230 to protect the circuit that powers your Husky Brute Electric Trailer Jack # HT87247.
    view full answer...
  • Roadmaster Stop Light Switch Kit For 2018 Jeep JL Wrangler Unlimited
    The Roadmaster Stop Light Switch Kit # RM-751490 will work for your 2018 Jeep JL Wrangler Unlimited. As you know the fuse tap does not work with the Jeep JL because it will not fit in the spot in the fuse box. All you need is a fuse holder # SWC9545 and the 10 amp fuse that comes with # RM-751490. That connection will go right to the battery. I have a video attached that shows this product being installed on the 2018 Jeep JL Wrangler Unlimited. The part about the fuse starts at...
    view full answer...
  • Replacement 30 Amp Fuse Holder for Husky 3K Electric Trailer Jack
    The Husky 3K powered trailer jacks such as # HT87248 use a 30 amp fuse. What I recommend instead of replacing the fuse and wiring is to use a circuit breaker, # PK54530, so that it will auto-reset. Then you just need some 10 gauge wire, # 10-1-1, sold by the foot. Or for a fuse holder you can use # SWC9545 with a 30 amp mini fuse obtained locally. This is a 12 gauge wire but given the short distance from the jack to the battery this small piece of 12 gauge wire will work perfectly fine.
    view full answer...
  • Availability of a 4-Flat and 5-Flat Wiring Harness to Power an Air Compressor on a Trailer
    With the set up on your 2013 Lincoln MKX, you best option will be to install the T-One Vehicle Wiring Harness, # 118519, and then use the Tow Ready 4 Pole to 5 Pole Wiring Adapter, # 20036. This the adapter will connect your 4 pole vehicle plug and 5 pole plug on your trailer. The trailer lights will be connected to your vehicle. The extra wire then can be wired up to the battery to power your air compressor. Depending on the amp draw of your compressor, I also recommend you wire in...
    view full answer...
  • What is Needed to Install Interior LED Lights in an Enclosed Trailer
    Installing the Optronics LED RV Interior Light, # RVILL34, should be a fairly easy project. The two wires on the light are 12 gauge. The white wires can be grounded to the trailer body, the black wires are your power wires. Using # 12-1-1 you can connect to the black wires and run this wiring to where you are going to install your battery. Using a 12 gauge wire nut, found at any hardware store, connect all the light wires and the power wire from the battery together or you could...
    view full answer...
  • Wiring Options for Installing MaxxFan Deluxe 12V Roof Vent MA00-06200K
    The MaxxFan Deluxe 12V Roof Vent # MA00-06200K will do a great job of moving air through your truck topper since it outputs a healthy 900-cubic-feet-per-minute (CFM) air flow. This vent should be able to cool effectively in your topper well below its maximum speed capacity which should mean quiet operation a long working lifespan. Since this unit draws a maximum of 5-amps current you'll want to ensure you install it on either an existing lighting circuit that is rated for that much power...
    view full answer...
  • How to Install the Peak Backup Camera Part # PKCOBU7 on a Horse Trailer
    The first step for installing the Peak Backup Camera Part # PKCOBU7 would be to mount the rear view camera somewhere inside the horse trailer. You can use the Self-Tapping Fasteners for License Plates and License Plate Frames part # CR80430 to install the bracket/camera. Once the camera is in position, you will have two wires to connect. One will be red for the 12 volt power and the other will be black for the ground. Strip about 1/4" of the jacket off of each wire. Once done you will...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jeffrey L
Written by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.