Upgrade the factory pin box on your fifth-wheel trailer to this cushioned model that dampens road shock and reduces back-and-forth chucking for a more relaxed towing experience. Unlike air bags, the internal rubber spring requires no maintenance.
Features:
Specs:
Most standard pin boxes are constructed of steel and are built with the sole purpose of connecting your fifth-wheel trailer to your tow vehicle. There is no cushioning built in, so a factory pin box doesn't do anything to provide a comfortable ride when you're hauling your fifth-wheel trailer.
This MORryde pin box, however, is built with an internal rubber spring that absorbs road shock and vibration at the connection point. So if you're driving on unpaved roads or uneven pavement, this pin box will prevent any road shock and vibration you encounter from transferring from your tow vehicle to your fifth-wheel trailer and vice versa. In other words, the rubber spring takes the brunt of the impact so you and your towing setup don't have to. And because this unit uses a rubber spring instead of an internal air bag like some other upgraded pin boxes, there's no maintenance required.
The internal rubber shear spring in this pin box is optimized for trailers that range from 14,001 to 18,000 lbs to ensure that it provides just the right amount of shock absorption for your application. If this pin box were to be used on a larger trailer, the spring would be too stiff to provide enough cushion. And if your trailer's GVWR was less than 14,000 lbs, then the spring would be too flexible to provide adequate support.
Chucking, the back-and-forth jerking movement you feel in your cab when towing, occurs most frequently during starts and stops and while making turns. A typical, factory pin box creates a rigid connection without much give. So when a harsh stop occurs, all of the trailer's forward momentum gets forced through that stiff connection, slamming the king pin in the hitch and jerking your truck around.
To combat this, glide pads are built into the MORryde pin box that allow the skid plate to shift up to 3" forward and backward and 1-1/2" side to side to compensate for some of that violent motion so that you don't have to feel it in your cab.
This MORryde pin box is a direct replacement for your existing Lippert 1716 pin box, so the installation is very straightforward. After removing your old pin box, the MORryde can be mounted into place using the same hardware and bolt holes used by the factory pin box.
Because of the weight of the unit, you'll want a couple of friends to help you lift it into place during installation. Once the hardware is securely bolted down, you'll be ready to go.
Alternate Instructions
Average Customer Rating: 4.7 out of 5 stars (173 Customer Reviews)
Upgrade the factory pin box on your fifth-wheel trailer to this cushioned model that dampens road shock and reduces back-and-forth chucking for a more relaxed towing experience. Unlike air bags, the internal rubber spring requires no maintenance.Thank you again for your prompt service/delivery and best prices
Installation instructions were very good! It fits perfectly.
Beware when ordering a part this heavy, the shipper only delivers to the curb.
Entirely better experience towing, my wife and I picked up our 1st 5th wheel toyhauler camper and towing it home it started jerking back n fourth, not knowing what the hell was going on she wanted to return it. I did some research and found this Moryde cushioned pin box and it’s super smooth. We’re both very happy and feel a lot more comfortable towing places.
This kingpin box was promptly delivered after ordering. We installed the new Moryde today and it went on very easily. Although it is very heaving, I used my tractor with a front end loader to remove the old pin box and install the new which really made it very easy. I hooked up to my truck to test the level and everything was perfect. Very satisfied! Thank you etrailer.
Ordered the Morryde pin box to replace the Rhino pin box on a 2022 Riverstone Reserve. Shipping from Etrailer was right away but had a little delay with the shipment because the semi truck could not get up my road. Taking off the Rhino pin had a little trouble as one of the bolts was cross threaded, which I have read from others also having the same issue. The Morryde came with all the hardware and with two people had it changed out in about an hour. Took it for a small drive and really seems to make a big difference, will get it out for a longer drive soon on my next trip. The new pin box went in the same position as the old one and did not change my level or bed clearance.
So far this is a welcome upgrade. Took it on a short trip over some rough road that normally triggers chucking on my F-250. This pinbox prevented it which was a welcome change. I’m looking forward to some longer trips.
Installation was straightforward. Removed the old pinbox which was fairly easy. Installing the new pinbox would’ve been a challenge had my buddy not had a forklift attachment for his tractor. I don’t know the exact difference in weight between the old Lippert pinbox and the new Moryde, but it is substantially heavier. I’d say 2 people muscling and one to install the hardware would still be a challenge. Forklift or similar is the way to go. Also, the new pinbox doesn’t come with new hardware. Got to use your old or make a trip to Lowe’s/Home Depot.
All and all I’m happy with the upgrade, but I thought it was pricey and don’t like the additional weight.
MORryde makes a fantastic Pinbox! I have been a e-trailer customer many times over and always find the customer care from start to finish is great. We recently purchased a 2024 Brinkley Z3100 which came with a Rhino Pinbox.
I hated it! Lots of chucking. Our other 5th wheel a King of the Road has the MORryde on it and pulls like a dream. I had asked the dealer at time we made our new purchase about putting on the MORryde on it and I was told it could not be done.
Don’t ever take just one persons word as gospel and further looking into it, there is definitely a conversion available and thanks to the folks on my Brinkley Owners page and the folks at e-trailer, I ordered it and it is a perfect fit. Definitely takes 2 guys to put it on but I’d say its a 2-3 hour job.
Our install took us about 5 hours as one of the original bolts with the Rhino was cross threaded. Can’t wait to get out and tow with our new MORryde!! They are the best!! Thanks e-trailer for your help!
It was a nice upgrade over the solid pin box my fifth wheel had. The MORryde pin box did improve the quality of the the ride in my tow vehicle. I would recommend it as a good value for the money.
I have not installed this part on my 2021 momentum 395MSR yet, but it was received in perfect condition. I had the same pin box on my Solitude390RKR and loved the way it handled. If the part does not perform as expected once installed and after I have some miles behind it i'll update my review.
Probably the single best addition to my fifth wheel. We have a grand design solitude 2930. Connecting to the trailer is so much softer and taking off from stops is smoother. The chucking is all be gone. I’d highly recommend this as one of the first upgrades
This cushioned pin box is definitely worth the upgrade. Chucking is greatly reduced (There's no getting totally away from it) and the frequency of the chucking is tempered making the ride much more pleasant. There are times when you forget your towing it's so smooth on decent stretches of road. Delivery was quick (3 days early as a matter of fact) and driver dropped it in my garage. Plus the fitment was perfect, bolted on with no problem. Entire experience was good !!
Installed this MORryde cushioned pin box on a 20K# toyhauler(from a solid pin). Comparing 9K miles before and 11K miles after, it made a remarkable improvement in the ride, especially on choppy, rough roads (think I-40 across New Mexico). Easy bolt-on installation. I consulted with the staff @ etrailer.com to ensure the correct hitch model was selected. Shipping was straight forward via truck freight. Excellent communication through the process.
Product was received as expected. Installation went very well. I am eager to try it out this week on the road!
The king pin box was delivered in perfect shape. Metal banded, strapped to a wood pallet in a card board box. Upon installation it fit perfect.
The customer support was excellent throughout the whole process from the ordering, making sure the correct king pin box was selected, to follow up, due to the long wait. The long wait was due to Covid 19. I am a happy camper and cannot wait to try it out on the road soon. I will send a follow up review. Thanks etrailer and especially Christina J. she answered all my questions and followed up on time every time.
Love the new pin box. It has performed as advertised and provides a much smoother ride!
Good price and quick free delivery.
The product is so much better than the stock pin box.
Very easy install and very happy.
Well, upon receipt of the package ,which was all ripped up, and all the bolts,nuts and washers had came out of the bag and a rubber hole plug missing, everything else seems to be in order. I have not installed yet, therefore the 4stars.
Perfect swap for my trailer much better ride
Trailer tows so much better with the new pin box.
While not yet installed thought it worth commenting on the experience thus far - in a word “excellent”. Package was well packaged, the transporter was awesome and kept us informed of his delivery schedule, given the weight of the shipment.
Bottom line, the process to date has been outstanding and would highly recommend using etrailer for your rv needs.
After talking to your customer support staff and picking out the right pin box, I ordered it the next day on line. Shipping was fast and it arrived in good shape. The Pin box came with all the bolts and Hardware, it took about an hour to install on my 2024 Momentum M class RV. I took it for a 2-hour road trip and you cannot believe the difference in the ride. I am never disappointed when I deal with etrailer.
Fit perfect on my Grand Design Reflection 303RLS. Will be taking a long trip very soon and will let you know how it performs.
I think that the moryde pin is well worth the money
Do you have a question about this 5th Wheel Pin Box?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.