Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes

See what our Experts say about this Demco Accessories and Parts

• Getting Rid Of The Play In The Demco Hijacker Autoslide Locking Plate For Rhino Pin Boxes
  There may be a little play on the bottom of the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes. part # DM76FR, to account for the different machining tolerances, but the top plates should hold it snug and remove the play. I did speak with someone from Demco and they said that once this is installed and torqued to spec that you should not see any of the play that you are referring to in your question.
  view full answer...
• Is There Supposed to Be Gap Between Side Plates on Demco Autoslide Locking Plate for Lippert Rhino
  I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part # DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to the amount specificed in the instructions as that may reduce the amount of gap but nonetheless, it's normal.
  view full answer...
  
• Adapter Needed To Connect A Lippert Rhino Box To A Demco Hijacker 5th Wheel Hitch
  Yes, all you'll need is the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes # DM76FR to make your new camper's Lippert Rhino Box compatible with your Demco Hijacker # DM8550034 5th wheel hitch.
  view full answer...
• Do I Need a Locking Plate to Use a Demco Autoslider w/ a Rhino Pin Box?
  Congrats on the new trailer! Yes, you will need a locking plate to use the Demco Autoslide item # DM8550024 with a Rhino Pin Box. You will want the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes item # DM76FR. The Demco Autoslide 5th Wheel Hitch w/ Slider item # DM8550024 you were looking at has an 18,000 lbs capacity and has legs that fit inside the Ford factory puck system. So if your 2016 F-250 has the factory puck system you will be ready to go.
  view full answer...
• Road Armor Pin Box And Demco Hijacker Autoslide 5th Wheel Hitch Compatibility
  To make your Road Armor Pin Box work with the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 21,000lbs # DM8550035 you'll need the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes Item # DM76FR.
  view full answer...
• Is a New Capture Plate Needed for Demco Hijacker 5th Wheel Hitch with Lippert Rhino Pin Box
  Yes, you'll need a new capture plate when using the Demco Hijacker Auto Slide 5th Wheel Hitch with a Lippert Rhino Pin Box, the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes part # DM76FR.
  view full answer...
• How To Set-Up Demco Hijacker 5th Wheel Hitch When Using Rhino Box Pin Box
  What I think you are asking is, how to set-up the hitch with the Rhino Box as the narrow width of the pin box does not engage the capture plates on your Demco Hijacker 5th Wheel hitch. What you are missing is the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes, # DM76FR. You need to use this locking plated when using a Lippert Rhino pin box with the Demco hitch.
  view full answer...
  
• Correct Demco Autoslide Capture Plate for Rhino Pin Box
  Yes, you need the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes part # DM76FR in order to hookup a trailer with Rhino pin box to the Demco Autoslide 5th Wheel Hitch.
  view full answer...
• Capture Plate Kit Needed For A Demco Hijacker And Pin Box Connection
  If you're referring to the locking plates that sit on the head of the Demco Hijacker and clamps onto the pin box to lock the head to it then you'll need part # DM6171 if you have a Trailair or Rota-Flex pin box or part # DM76FR if you have a Lippert Rhino pin box. Based on your description of the pin box you most likely have the Lippert Rhino so you'd want to go with the # DM76FR. If it is a Rhino then it will should have Rhino labeled on the sides and possibly also the front.
  view full answer...
• Recommended 5th Wheel Trailer Hitch For A 2024 Chevy Silverado 2500 With OEM Prep Package
  We always recommend using a sliding hitch whenever the bed of the truck falls down to the 6' range. From there you'd just need to decide if you want a fixed slider or automatic slider, which really depends on how much you'll be needing it. With your trailer being forty feet in length you'll most likely have to pull really ride and then go into a bit sharper of a turn to maneuver around so an automatic slider like the Demco Autoslide 5th Wheel Hitch w/ Slider - Chevrolet/GMC Prep Package...
  view full answer...
• Parts Needed To Use Demco Hijacker Autoslide W/ 21k Lippert Rhino Pin Box
  Since your 5th wheel trailer has the new 21k Lippert Rhino Pin box you will need to use the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes # DM76FR for the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 21,000 lbs # DM8550035. I included a video of the # DM76FR for you to take a look at.
  view full answer...
• Does Lube Plate Need to Be Used for Hijack Autoslide Since King Pin is Locked Out
  I definitely see where you're coming with when it comes to towing using the 18K Demco Autoslide 5th Wheel Hitch # DM69GV and Locking Plate # DM76FR for your 2022 Ram 3500. On questions like this I always like to refer back to the owner's manual since they know what's best for their products. If we jump to page 8 of the instructions for the Hijacker we see that Demco does recommend using a lube plate like the Reese # RP83002 just to help keep things from wearing down. Even with the king...
  view full answer...
  
• Lube Plate Compatibility With Demco 21K Autoslide 5TH Wheel Hitch and Lippert Rhino Box Adapter
  Demco recommends using a 3/16" or thinner Lube Plate # 16721 with their Autoslide 5th Wheel Trailer Hitch # DM8550035. With the addition of the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes # DM76FR you have I recommend using a dry lube on the mating surfaces to reduce wear. A good silicone dry lube like the Spray # RM-747 will not attract and hold dirt like grease.
  view full answer...
• Locking Plates for Demco Hijacker Autoslide
  The locking plates for the Demco Hijacker Autoslide are needed for the following cushioned pin boxes: Glide Ride, Mor Ryde, Trailair Tri Glide, Trailair Flexair, Rota Flex, and 5th Airborne. So the correct one will depend on your pin box. We have the following plates depending on what pin box you have: # DM6036 for Demco Glide Ride pin boxes # DM76FR for Lippert Rhino pin boxes # DM6095 for Trailair Tri-Glide pin boxes # DM6025 for MOR/ryde pin boxes # DM6026 for standard-length 5th...
  view full answer...
• Can Sidewinder be Used to Replace Rhino Pin Box for Towing with 2022 Ford F-350 Super Duty
  While we do have some replacement pin boxes for the Rhino pin box, we'll have to look at an alternative setup since there are no Sidewinder replacements for your application. For your application you can use the Demco Hijacker Autoslide which essentially accomplishes the same thing as the Sidewinder pin box for your short bed 2022 Ford F-350 Super Duty. If you have the OEM puck system on your F-350 then you can use the 18K # DM8550024 or 21K # DM8550038 Hijacker depending on the weight...
  view full answer...
• Recommended 5th Wheel Hitch For a Short Bed 2022 Ford F-250 w/ Prep/Puck In Bed Hitch System
  I recommend the Demco Hijacker Autoslide 5th Wheel Hitch # DM8550024 for your 2022 Ford F-250. This hitch will drop into the factory prep/puck system and the auto sliding 5th wheel hitch will keep you from having to get out of your truck to reposition the hitch for maneuvering. The hitch is rated for up to 18,000lbs trailer capacity and 4,500lbs of maximum tongue weight. This hitch will fit most pin boxes that are 12" - 14" wide but you may need a separate locking plate if you have a specialty...
  view full answer...
• Recommended Hitch System To Pull a 5TH Wheel Camper With a 2019 Ram 1500 With 5-1/2' Bed
  The Demco Autoslide 5th Wheel Trailer Hitch # DM8550040 is the best option for towing your 2024 Forest River Cherokee Black Label 256RRBL with your 2019 Ram 1500. This hitch automatically slides back up to 22-1/2" as you turn so there is no need to get out of the vehicle. And as you are not changing your pin box there is no risk of voiding your warranty and you can use the hitch with other trailers should you get a different 5th wheel down the road. To install the hitch in your bed you...
  view full answer...
• Recommended Sliding Fifth Wheel Hitch For A 2018 Ram 3500 Towing Multiple 5th Wheel Trailers
  Since you have a short bed 2018 Ram 3500 you will most certainly need a sliding fifth wheel hitch to prevent the nose of the campers from taking out the cab of your Ram when you have to make a sharp turn. Since you'll be doing this a lot you'll want to spend the extra money and get the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550035. This hitch has an autoslide feature which will allow the head to automatically slide back as you turn so that you don't have to constantly get...
  view full answer...
• Best Sliding 5TH Wheel Trailer Hitch For a 2022 Ford F-250/F350 With Factory Prep/Puck Package
  I recommend the Demco Hijacker as being the best 5th wheel hitch for your 2022 Ford F-250. This hitch is available in 2 weight ratings based on the 5th wheel you will be hauling. 18,000LB Demco Hijacker # DM8550024 21,000LB Demco Hijacker # DM8550038 Both of these are auto-sliding hitches so you can stay in your truck instead of having to deal with unlocking and locking in receiver that is needed with a manual slider. They will drop into your factory prep/puck holes in your bed for a...
  view full answer...
• Best Sliding 5TH Wheel Hitch For a 2022 Ram 2500 6-1/2' Bed With Factory Hitch Prep/Puck Package
  I recommend the Demco Hijacker Autoslide 5th Wheel Trailer Hitch 18,000LB # DM8550034 or 21,000LB # DM8550035 for your 2022 Ram 2500. You will need a Demco 5th Wheel Rail Adapter # DM6099 that will drop into your factory hitch prep/puck system to attach the Hijacker hitch. The auto slide hitch means you get to stay in the cab when you need to make the tight turns rather than having to get out and reposition the hitch for maneuvering a tight turning area just to have to reposition it again....
  view full answer...
• Demco Autoslide 5th Wheel Hitches Compatible With Ram Factory Prep/Puck System For 5TH Wheel Hitches
  Yes, Demco does have the 21K Autoslide # DM89GV as well as an 18K Autoslide # DM69GV that will fit the factory prep/puck system in a Ram 2500 or 3500 pickup. If you have one of the following pin boxes you will also need the corresponding accessory to prevent the pin box from moving inside the Demco head. MOR/ryde Pin Boxes # DM6025 Lippert Rhino Pin Boxes # DM76FR Extended 5th Airborne Pin Boxes # DM6062 Standard 5th Airborne Pin Boxes # DM6026 Demco Glide Ride Pin Boxes # DM6036 Lippert...
  view full answer...
• How to Determine If Reese Goosebox On 2022 Jayco Eagle Will Allow 90 Degree Turns 2022 Ram Short Bed
  You will find the frame tag on one of the arms which the pin box mounts to on your 2022 Jayco Eagle 335RDOK. It does appear this is going to use the Lippert Rhino pin box which the Reese Goose Box # RP85FR will fit. You will also need a set of Safety Chains # RP49151 with changing to a hitch ball connection. To verify your clearance I do have some measurements to help you determine you will have the clearance you need. The Reese Goose Box is going to be 19-1/4" from the front mounting...
  view full answer...

Do you have a question about this Accessories and Part?