Replacement Hub for a 3/4 Inch Diameter Straight Spindle
Updated 06/11/2024 | Published 08/07/2014
Products Featured in This Question
Question:
I have a boat trailer that has a 3/4 spindle. I need a 4 lug hub to fit, the spindle is straight. Now it has a rim that fits the spindle with the bearings as part of the rim. Would like to use a hub and bolt the rim to the hub. Tire size is 4.80 - 8
asked by: Joe L
Expert Reply:
The only hub we have that is associated with a 3/4 inch spindle is # AH15450ECOMP. This is an agricultural hub that takes inner bearing # LM67048 and outer bearing # LM11949. But the spindle it fits on is not straight, it is tapered, # TRU54FR.
If this is a kit trailer then in order to replace the hubs, wheels, and tires you are going to have to replace the axle. I have included a link to the right to the straight axles and the axle-less systems that we have. The axle-less systems may be the best option for you since they are the "axle" and suspension all in one.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Shop: Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch
- Shop: 5th Wheel Mounting Rail Adapter for Under-Bed Rail Kit for Reese Elite Series 5th Wheel Hitch
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Search Results: 30183
- Search Results: 11949
- Shop: Dexter Dual Trailer Wheel Lug Nut with Swivel-Flange - Metric - Qty 1
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Search Results: hba16
- Search Results: hba~16
- Shop: Trailer Hitch
- Search Results: combo bar
- Search Results: 56003
- Search Results: 2854
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Video: All You Need to Know About the Grease Seal
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Q&A: Looking For Replacement Spindle For A Boat Trailer
- Q&A: Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
- Q&A: Solution for Replacement Hub For Spindle With LM67048/LM11949 Bearing Combination
- Video: Detailed Breakdown of the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel
- Video: Wheel Stud Installation on a Boat Trailer
- Q&A: Trailer Tire Size Close to 4.80-8 Tire Overall Diameter
- Article: Trailer Tire Sizing
- Video: Trailer Wheel Measurements
Todd
9/6/2020
I have the same situation as described above. Do these hubs for a 3/4 inch straight spindle not exist? Also, could I get some links to help me explore my options? Thanks!