Recommended Dual Motor Landing Gear For a 2013 KZ Inferno Toy Hauler

Question

Question:

2013 kz inferno need replacement dual motor landing gear. Bull dog 500708 or ultra fab or ?

asked by: Mike E

0

Expert Reply:

I recommend the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 over the Bulldog 500708. The Ultra-Fab is rated higher at 12,000lbs and is capable of 38" lift. This is 4,000lbs and 2" higher than the other. I have also heard of the Ultra-Fab having less issues and the motors being much more reliable.

expert reply by: Bud M

0

Answer 1

When it comes to adding a landing gear set to your 2010 Keystone Montana Hickory The Landing Gear Set w/ Handle #RVLG-8HDL will work for you. The landing gears have a durable, black powder coated outer tube and has zinc-finished inner tubes that…

view full answer...

Answer 2

If you are looking to replace your landing gear then I have a possible solution for you, we just don't carry any sets with the part VMC900R-304103 that you referenced. Our Landing Gear Set #RVLG-8HDL is rated for 8,000 lbs and has 20-1/2" of…

view full answer...

Answer 3

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

view full answer...

Answer 4

I can give you some information to help you determine if the Lead #LC179013 and Follow #LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers.…

view full answer...

Answer 5

I attached a diagram that shows how the Lippert Components Venture Lead Leg Repair Kit #LG-146059 installs.

view full answer...

Answer 6

In previous interactions we have found the 2010 Keystone Laredo 5th wheels to use Venture VMC900 landing gear. This would give you the Replacement Follow Leg #LC119101. I do recommend verifying this is the correct leg for you by measuring your…

view full answer...

Answer 7

If the thrust bearing is broken on your VMC900R Venture landing gear you are going to need to replace the leg, which you would need to match by the length of the outer tube, which is likely going to be 29-1/2 inches, but please measure to verify.…

view full answer...

Answer 8

Lippert landing gear parts are sold under other brand names as well, such as Stromberg Carlson, Venture and Atwood, and often an alternate part fits and works perfectly well. You'll just want to match the length of the original lead/driver…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Bobby! As far as the jacks go for item #RVLG-8000 and item #RVLG-8HDL there is absolutely nothing different. The item #RVLG-8HDL comes with the manual handle that I have attached a picture of below. That is the only difference. If your 2019…

view full answer...

Answer 11

The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…

view full answer...

Answer 12

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

view full answer...

Recommended Dual Motor Landing Gear For a 2013 KZ Inferno Toy Hauler

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching