Replacement Clearance Lights For Glo Brite 122r/122y

Question

Question:

Looking for a trailer clearance light, made by glo brite number is 122r/122y. it is about 3 3/4 by 1 3/4, red in color. can you help me out. has 3 diode lights in it.

asked by: Paul S

1

Helpful Expert Reply:

The Optronics LED Clearance or Side Marker Trailer Light is available in Red # MCL0030RBB and Amber # MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your light. You are able to get a replacement lens in either Red # OPT67WR or Amber # A0028AB if your lens becomes damaged with the new lights.

expert reply by: Bud M

1

Answer 1

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 2

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 3

Hey John, since the Goodyear Wrangler Tire and Wheel part #LH65VR has a pilot diameter of 3.19 we have plenty of options that would work great. I think the black part #CXF106B would look the best or maybe the black and chrome part #SEN53FR which is a…

view full answer...

Answer 4

Hey Richard, The Voyager AOM561 has been discontinued so you'd be looking at replacing both the camera and monitor because they made their different camera generations incompatible with each other. With you wanting to stick with your current…

view full answer...

Answer 5

Hey Darrell, thanks for the information! It looks like you have a Artis PDS1-130-1240E pump. The Flow Max RV Fresh Water Pump item #LC689052 you were looking at, would be a great replacement. This is also a 12 volt, 3 gallon per minute pump, that is…

view full answer...

Answer 6

Can I get you to measure from the very top of the arm to the very bottom? Do you by chance have a 63 inch arms which the part #LC97UD could replace?

view full answer...

Answer 7

The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB. If…

view full answer...

Answer 8

I looked up your old DF-IS001 light switch and found it is a simple 12v DC light switch such as the Mini-12v Switch #37213645 you were looking at. As long as the switch you choose is rated for 12v DC power and is the same dimensions it will work just…

view full answer...

Answer 9

Since Glo-Brite is no longer in business we can not get replacement parts for their products, that being said, the Lens for Optronics MCL0028 Series Clearance or Side Marker Light #A0028AB you reference is the closest replacement we offer. This…

view full answer...

Answer 10

I do have an option but Glo-Brite is no longer in business so you won't be able to get any replacement parts for these lights such as lenses. The only option you have would be a full replacement for which the most similar option we offer is the…

view full answer...

Answer 11

Hey Martin, The only difference I'm seeing between the Replacement Motor #TUS24FR and the Replacement Motor #LC125802 is that the TUS24FR has a 9000 RPM rating while the LC125802 has a 440 RPM rating while under load, which jumps up to 500 RPM…

view full answer...

Answer 12

Hi Karen, What are the dimensions of the space available for the fridge? If it's pretty tight the only open we currently have would be the the same fridge #324-000119 (23-1/2"W x 25-3/4"D x 59-3/4"T), but if you have a bit more…

view full answer...

Replacement Clearance Lights For Glo Brite 122r/122y

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching