Replacement Clearance Lights For Glo Brite 122r/122y

Question

Question:

Looking for a trailer clearance light, made by glo brite number is 122r/122y. it is about 3 3/4 by 1 3/4, red in color. can you help me out. has 3 diode lights in it.

asked by: Paul S

1

Helpful Expert Reply:

The Optronics LED Clearance or Side Marker Trailer Light is available in Red # MCL0030RBB and Amber # MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your light. You are able to get a replacement lens in either Red # OPT67WR or Amber # A0028AB if your lens becomes damaged with the new lights.

expert reply by: Bud M

1

Answer 1

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 2

Can I get you to measure from the very top of the arm to the very bottom? Do you by chance have a 63 inch arms which the part #LC97UD could replace?

view full answer...

Answer 3

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 4

Hey Richard, The Voyager AOM561 has been discontinued so you'd be looking at replacing both the camera and monitor because they made their different camera generations incompatible with each other. With you wanting to stick with your current…

view full answer...

Answer 5

The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB. If…

view full answer...

Answer 6

I looked up your old DF-IS001 light switch and found it is a simple 12v DC light switch such as the Mini-12v Switch #37213645 you were looking at. As long as the switch you choose is rated for 12v DC power and is the same dimensions it will work just…

view full answer...

Answer 7

I do have an option but Glo-Brite is no longer in business so you won't be able to get any replacement parts for these lights such as lenses. The only option you have would be a full replacement for which the most similar option we offer is the…

view full answer...

Answer 8

Hi Karen, What are the dimensions of the space available for the fridge? If it's pretty tight the only open we currently have would be the the same fridge #324-000119 (23-1/2"W x 25-3/4"D x 59-3/4"T), but if you have a bit more…

view full answer...

Answer 9

Since the remote works we know the board isn't totally shot. I'm guessing it is the wiring for the control switch. All you can really do is check that wiring to make sure it is secure and no corrosion is present at both ends. If you decide to…

view full answer...

Answer 10

I believe you are looking for the correct nut to fit the stud part #007-112-00 which would be the #38N.

view full answer...

Answer 11

It's possible, however when replacing knurled bolts it's best to replace the bolt with another knurled bolt. In order to determine which replacement bolts you're going to need, you're going to need to remove one of the bolts and…

view full answer...

Answer 12

For an RV with a currently installed Dometic Duo-Therm 59516.531 AC unit, I recommend the Advent Air for Dometic Setups, #ACDOM150. This is a 15,000 Btu replacement option that plugs directly into your current Dometic setup and works seamlessly with…

view full answer...

Replacement Clearance Lights For Glo Brite 122r/122y

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching