Replacement Lens for Petersen Clearance Side Marker Trailer Light With Reflex Dimensions

Question

Question:

What are the masurments on this lense

asked by: Russell W

0

Expert Reply:

I went out to our warehouse and measured the Replacement Lens for Petersen Clearance Side Marker Trailer Light with Reflex # PE95ZR, and measured 3-3/16" long, 1-5/8" wide, and 2-3/4" on center between the mounting holes.

expert reply by: Bryce D

0

Replacement Lens Dimensions
(click to enlarge)

Answer 1

I will be happy to help you find the right LED replacement lights for your horse trailer. Based on the information you have provided the amber LED replacement is #MCL76AB. The red version is #MCL76RB. Another option is to use Peterson lights #M353A…

view full answer...

Answer 2

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 3

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

view full answer...

Answer 4

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

Answer 5

This has come up before and we have reached out to Petersen directly about a replacement lens, and they told us that the Replacement Red Lens for Peterson Rectangular Side Marker Light w/ Reflector #55-15R is the correct replacement. When these…

view full answer...

Answer 6

We have the Peterson Red Flush Mount Clearance Light with Chrome Plating, 126R #425000 to replace your red lights and the Peterson Amber Flush Mount Clearance Light with Chrome Plating, 126A #424800 to replace your amber (yellow/orange) lights. If…

view full answer...

Answer 7

The bulb type of the clearance light #424800 is a 193/194 like the part #A194B.

view full answer...

Answer 8

The SAE number isn't the best way to pick out replacement lenses for trailer taillights since that isn't actually a part number. However, I did find a replacement lens with SAE P2A 01 DOT on the front of it. Check out the part #A44RB. If this…

view full answer...

Answer 9

The SAE number you provided in your question isn't always the most accurate way to determine a correct replacement assembly. This is simply because it does not refer to the actual light part number, but to various safety guidelines that it meets.…

view full answer...

Answer 10

The Optronics Trailer Clearance or Side Marker Light w/ Reflector item #MC48AB is the amber lens version of the Red Lense Optronics item #MC48RB you referenced. These lights measure 3-15/16" long x 1-7/8" tall x 1/2" deep and the…

view full answer...

Answer 11

Most GM trucks use a pretty standard wire color for their tow packages, but I always recommend testing for function, and not just color. If you follow the bundle back there should be more wires than the ones you mentioned, for a total of 8.…

view full answer...

Replacement Lens for Petersen Clearance Side Marker Trailer Light With Reflex Dimensions

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching