Recommended Replacement for Bargman 68 SAE-P2-A81 Clearance Lights

Question

Question:

Is the product Optronics Trailer Clearance or Side Marker Light w/ Reflector - Incandescent MC48RB Red lens is also offer in amber lens MC48AB ? Is it fitting as replacement for Barman 68 SAE P2 A81 ? Thank you !

asked by: Rejean T

1

Answer 1

The Optronics lights, #MC48RB for red and #MC48AB for amber, are the equivalent lights to the Bargman 34-68-511 and 30-68-511. So they are not exactly the same but they could work depending on the application. The Optronics lights are 3-29/32" L…

view full answer...

Answer 2

I believe you are asking if a fuse is needed when installing the Diamond Charging Station #DG61024VP. The Charging Station does not require a dedicated fuse and it's just going to be wired directly to your 12V power source, either to existing…

view full answer...

Answer 3

The lens you are looking for is the part #30-86-712 which is the correct amber lens for the 86 Series Bargman taillight #30-86-203 thats in your picture.

view full answer...

Answer 4

I completely understand how you feel. Flat towing a vehicle can seem overwhelming but I am happy to walk you through the parts you will need. The first thing to check is the vehicle owner's manual. I checked it online and on page 266 it states…

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 8

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 9

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 10

Hey Paul, there really isn't any downside to going with the 7500 rated Air Lift kits like the part #AL57575 over the 5k rated kits aside from them costing a little more so for you I would definitely recommend the #AL57575. Are you wanting a…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

There is not a direct replacement available for your Bargman 68 SAE-P2-A81 red clearance lights, however we do have a trailer light with comparable dimensions. I recommend looking at the Optronics Rectangular Trailer Clearance Side Marker Light - Red…

view full answer...

Recommended Replacement for Bargman 68 SAE-P2-A81 Clearance Lights

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching