MoRryde CRE3000 Equalizers on 31 Inch Tandem Axle Spacing

Question

Question:

Im looking at equalizer hangers for my tandem axle travel trailer. Morryrde CRE 3000 and similar. Seems that most of these are available for either 33 or 35inch axle spacing. Mine measures about 31-inches. Do I need to look into having the hangars relocated to provide 33-inch spacing? Will the CRE3000 work with 31-inch spacing?

asked by: Justin

0

Expert Reply:

I just spoke with my rep at MORryde and she said that you are able to use the CRE3000 MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item # MR87ZR on a tandam axle trailer with 31 inch spacing if your are using 24 inch leaf springs.

expert reply by: Jerred H

0

Answer 1

Yes, you can use the Dexter E-Z Flex Suspension Kit #K71-652-00 with 31 inch axle spacing because these equalizers are a match for your current Equalizer #TREQ104. We have contacted Dexter about this previously and so long as the equalizers are the…

view full answer...

Answer 2

Those are some good options, and the best overall upgrade (without getting too crazy like you said!) for your Jayco with tandem 3,500 lb axles is going to be the MORryde CRE3000 with the X-factor crossmember. The Road Armor is good, but the…

view full answer...

Answer 3

Hi Bernie; the LCI52 designates these as 5,200 lb axles but that is further specified as 5,145 lbs since they're probably custom so you are correct. You can use the Equa-Flex Cushioned Equalizers #LC279687 but you need to measure your current…

view full answer...

Answer 4

We have checked with MORryde for your exact scenario and they said that you are able to use the CRE3000 MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item #MR87ZR on a tandem axle trailer with 31 inch spacing if your…

view full answer...

Answer 5

Hello Jacques, thanks for reaching out. Yes, you can put just one MORryde X-Factor Crossmember #MR33WR on the center hanger for starter. MORryde does recommend doing all 3 for optimal support, but it is perfectly acceptable to start with just one as…

view full answer...

Answer 6

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

view full answer...

Answer 7

Hi Mike, With the height of your equalizer increasing an inch you might need to switch to 3-1/8" shackle straps #TRSL313 to keep the leaf spring stack level but this isn't an exact science so your leaf springs could end up sitting too close…

view full answer...

Answer 8

MORryde has a version of the X-Factor Crossmember that was designed to work with the CRE3000 you have with the part #MR33WR.

view full answer...

Answer 9

The MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR includes one adjustable crossmember. Your existing hardware will be too short due to the extra thickness of the crossmember, so you will need to add #MR58ZR if…

view full answer...

Answer 10

It sounds like there was either a short on the electric brake power wire or the wire gauge running to the brakes was not big enough. Since the wires are already damaged, I recommend running 10 gauge wire, like part #10-1-1, from the trailer connector…

view full answer...

Answer 11

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 12

Well you've reached out to the right place, Kaivon - I'd be happy to help you navigate upgrading your trailer suspension! All three of those suspension kits you asked about are great, but my recommendation is using the MORryde Rubber…

view full answer...

MoRryde CRE3000 Equalizers on 31 Inch Tandem Axle Spacing

Product Page this Question was Asked From

Continue Researching