How Many MORryde X-Factor Crossmember Supports Are Needed For A Tandem Axle Trailer?  

Yes, you should install the MORryde X-Factor Crossmembers along with the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2580 on your Grand Design Solitude 390RKR. You will need to check to see if you will be able to use the standard…

MORryde has a version of the X-Factor Crossmember that was designed to work with the CRE3000 you have with the part #MR33WR.

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on…

You can use that upper hole on your hanger to install the #MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to…

Yes you can just use one MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR with your 2021 Jayco Jay Feather 25RB, however for full support a tandem axle trailer will need to utilize 3. Attached is a product overview…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

I reached out to MORryde for you and obtained the information that you requested for the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications part #MR43WR. I assume you're trying to clear some sort of drain line and if that's…

Yes, you can purchase the equalizers by themselves from the kit part #K71-653-00. The E-Z Flex 8,000 lb Equalizers alone without the kit components is part #K71-655-00 for a quantity of 2. The equalizers measure 2-7/8" tall by 7-3/4" Long…

Outstanding, thanks so much for the photos, they were really helpful. What it shows is that your 2022 Keystone Cougar 30BHS travel trailer does have stock suspension with a standard equalizer, and we do have the correct X-Factor Crossmember for you,…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

You will definitely want to go with the Road Armor Shock Absorbing Equalizer Kit #LC696740 over the MORryde as the Road Armor has more travel and will provide a smoother ride. Then, in regards to shackle straps I'm not sure what you mean by which…

That's a smart question, and because there is more weight and less stability at the rear of the trailer, install the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR aft/behind the single axle on your trailer. As for the…