Availability of Trailer Axles With 72 Inch Spring Centers
Products Featured in This Question
Question:
My axle center to center is 72inch what is available.
asked by: Tony B
Expert Reply:
The two relevant dimensions when replacing a trailer axle is the hub face to hub face of the existing axle and the center to center spring seat dimension.
Are you sure about that spring seat center to center distance? The closest axles we offer are a 5200 or a 6000 lb axle with a 71-1/2 spring seat center to center dimension. All have a hub face to hub face dimension of 86-1/2 inches. I've provided a diagram showing these dimensions.
We have a total of 4 axles available with these dimensions. All feature EZ Lube spindles that are compatible with a . The two 5200 lb axles are part # 8327816 which is just the axle. Spindle nuts and retaining washers are included. Part # 8327816-EB includes the axle, spindle nuts and washers, and brake hub/drums. The hub/drums include the bearings, races, grease seals, grease caps, wheel studs and lug nuts are included. The hub is a 6 lug on a 5-1/2 inch bolt circle. The 12 x 2 brake assemblies are also included. These two axles are compatible with a 25580 inner bearing and an LM67048 outer bearing.
The two 6000 lb axles are just as described above but with a higher weight capacity. Part # 8327826 is the axle only, and # 8327826-EB includes the axle, hub drums, brake assemblies etc. as mentioned above. These axles are compatible with a 25580 inner and a 15123 outer bearing.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: 58846 seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 89" Long - 3,500 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: Axle Replacement For Tracker Trailstar Trailer
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer tires and wheels
- Video: Finding the Right Trailer Wiring Harness
- Shop: Trailer Wiring
- Search Results: trailer leaf springs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: RV Bearing
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
- Search Results: trailer suspension parts
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: What is the Best Grease for Trailer Bearings
on Trailer Suspension Parts
