Are Bearings L44549 and L44649 Interchangeable

Question

Question:

i have a question on bearings are L44549 and l44649 interchangeable?

asked by: Roger

1

Helpful Expert Reply:

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, # L44649.

Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to confirm that it's inner diameter does measure 1.063 inches.

expert reply by: Leah S

1

Answer 1

Really good question, and the wiring kit is a passive one for the Stealth Hitches receiver and wiring kit that fits your 2018 Audi S4, which is the following part number: - Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #391AUDA417T I…

view full answer...

Answer 2

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

view full answer...

Answer 3

The tires that were on it, P215, are actually tires meant for passenger cars so replacing them with tires meant for a trailer is a good idea. As for the size, a ST225/75R15 tire with load range of E such as the Karrier #AM10303 would be fine, though…

view full answer...

Answer 4

The Trailer Idler Hub Assembly part #AKIHUB-545-35-G-K or part #AKIHUB-545-35-G-EZ-K for easy grease will be a direct replacement for the TDE 46210. That said, you may also need the Double Lip Seal part #168255TB since that hub can use two different…

view full answer...

Answer 5

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

view full answer...

Answer 6

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…

view full answer...

Answer 7

L44549 bearings have a 1-1/16 inch inner diameter, which is the same as the 1.063 inch inner diameter of bearings item #L44649. For this size you will want the Trailer Idler Hub Assembly item #AKIHUB-440-2-G-2K. This hub is designed for 2,000 lbs…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

On GM vehicles of that vintage, the 12-V pin should be hot regardless of whether the ignition is on or not. If it isn't showing voltage even with the ignition on, you're almost certainly on the right track thinking it's a blown or…

view full answer...

Answer 10

Hello Chris, thanks for getting in touch. I can confirm that the Curt Class 1 Hitch #C11354 will be a fit for your 2013 VW Beetle Turbo 2.0, and it will indeed be a no-drill install. You will have to fish bolts thru the frame using the included fish…

view full answer...

Answer 11

If you are referring to a trailer coupler repair kit like part #CT-3000-RK then no, these are not universal nor can you use different brands together. If you can provide me with the exact make and model of your coupler via the engraving on top then…

view full answer...

Answer 12

Thank you for the photos! It looks like Marvel used to be associated with Atwood and they went out of business a while ago. We have some similar coupler styles but I'm not seeing that any of our repair kits having the same design as your coupler…

view full answer...

Are Bearings L44549 and L44649 Interchangeable

Product Page this Question was Asked From

Continue Researching