Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
(219 reviews)
Price: $77.32
In Stock
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Item # D210
Retail:$109.08
Our Price: $77.32
You Save: 29%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (219)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - D210
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 0 Inch
- No Ball
- 7500 lbs GTW
- Class III
- CURT
- Built-In Dual Hitch
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball
- 2" Square receiver allows you to carry hitch accessories while you tow
- Perfect for a bike rack or cargo carrier
- Sturdy steel is black powder coated for corrosion resistance
- Hitch pin and clip included - hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Ball mount
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Ball hole diameter: 1"
- Drop: 2-1/4" from top of inside of vehicle's hitch opening to top of ball platform
- Length: 12-1/2" from center of hitch pin hole to center of ball hole
- Accessory receiver size: 2" x 2"
- Tongue weight: 750 lbs
- 7-1/2" Extension from center of hitch pin hole to center of accessory receiver's hitch pin hole
- 3-9/16" From top of shank to bottom of accessory receiver
- Pin hole diameters: 5/8"
- Limited lifetime warranty
Notes:
- The receiver portion of this unit is designed for hitch-mounted accessories only.
- Do not use with an additional ball mount to tow a trailer.
- When mounting an accessory in this receiver, your hitch's tongue weight capacity will be reduced by 50 percent.
- When using both the ball mount and the receiver the tongue weight capacity is not affected.
45810 Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs - D210
Average Customer Rating: 4.7 out of 5 stars (219 Customer Reviews)
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight while towing.by: John01/26/2023
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
by: Carol12/01/2023
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
by: Ray12/21/2020
We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack.
The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.
Ray H.
12/22/2021
Great solution for taking our bikes camping while towing our trailer
by: Debbie04/21/2021
This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.
Debbie
4/22/2022
Excellent. This has been an awesome product.
by: bruce11/02/2021
Once the bike rack and the ball are installed there is only 3" of space for the trailer coupler to attach to the ball. Mine open hitch height is 4 ½”, most others are similar. I cannot think of any trailer/rack combination that this could even be used for. The only way it could be used would be to hitch up the trailer then attach the rack then load the rack over the trailer. Not a good or safe proposition. The only way to detach the trailer would be to unload the rack and then remove it from the mount.
Jenny N.
11/3/2021
Thank you for your feedback. The solution that I have would be to switch to a hitch mounted tow bar that slides into the RV receiver - making sure that the brand matches base plate - and then you could use a hitch adapter like part # RM-077-6. You would also want to make sure that the tow bar was as level as possible.
by: Stephen E06/16/2020
Installed on my 2006 GMC Envoy. Mounted a Bump Step with a self installed camera. Now have full access for adding my trailer as needed.
Stephen E.
6/17/2021
Absolutely still in love with this product!
by: peanuts06/26/2014
I have been looking for a light up trailer hitch for a long time. So when I saw this one from etrailer I was very happy. I ordered it and it came in few days.
I also purchased the Curt Multipurpose Ball Mount with 2" Receiver so I could mount the light and still be able to tow with out switching them out. Both Product's are perfect for my needs. Your company is the best and I would definitely recommend Etrailer to others.
Thanks for the great service!
by: Chris H03/08/2017
We use this on a luggage carrier on a Mercury Grand Marquis. My son hauls lawn mowers on the rack and it works great. Very well made
by: Ron10/13/2018
Delivery was fast. Arrived in well packed box. Installed product with no issues at all. Works great and as advertised. Will be towing a travel trailer and needed a connection for a bike rack. When all installed, have plenty of room for placing bikes on bike rack. Really like this product!
by: VickieB6803/15/2017
Raised receiver portion was exactly what I needed to attach my cargo carrier, as my Grand Caravan Receiver was too low to the ground.
by: Mike11/12/2017
Extremely heavy duty. I will be towing a small aluminum boat behind our camper, and will build a 2 X 2 tube assembly to carry the spare tire on. I needed something to help carry my trailer spare as the hitch on the camper is mounted in such a way that I couldn't hang my spare tire on the bumper. This assures a way to carry the spare as well as tow my fishing boat!
Mike
Mike H.
11/15/2018
A year later, still functioning as designed. I found my hitch pin hole to be slightly off but was able to make it fit. Still hauling the boat and carrier.
by: Andrew 09/06/2023
Great product. Highly recommend.
by: Robert G.05/15/2012
WOW! This piece of gear is built so solid that it is never a worry hooked up to my motorhome, towing a two wheel dolly with a Jetta Diesel Sportwagon and a 4 place bike rack in the upper reciever!
The turn around time between order and delivery was very quick and I was kept aprised of shipping during the entire time.
Thanks!
Anonymous
9/9/2015
It appears that other comments say that in order to remove the car dolly from the ball, you have to remove the bike carrier. This seems to make the whole thing not very good. You do not mention this problem. It appears from the comments, the problem relates to the lack of space between the two receivers
by: Chad07/26/2012
This multi hitch receiver fits our needs great. We need to use it for hooking up our pop-camper and for our bike rack. With this receiver, we can now take our bikes with us and not have to mount the bikes on the camper.
The delivery time was fast. We ordered this on a Sunday evening and we received it on Wednesday.
The only thing that we would change is that if the top receiver was about an half inch or more higher, then we would have more than enough clearance for our camper locking part, but there is enough clearance to make this system work.
Stefan
6/14/2013
how many bikes does your bike rack hold? and, have you noticed any problems with turning sharp corners and your bikes coming into contact with your tent trailer?
by: RHK02/06/2017
This is a heavy duty receiver it will work great for towing a trailer and having the ability to add a bike rack or cargo carrier. Etrailers coustomer service is outstanding always easy to order and fast shipping with great prices.
Rhk
2/6/2018
The receiver is still working great no problems or issues are all.
by: Kelly B06/17/2017
Great product, but did not fit on my 2014 Traverse. The top receiver would rub on my fiberglass bumper of the Traverse and therefore only half the pin hole would line up with the receiver. Plus my 4 bike rack would not fit between car and pop up camper then.
Kelly B.
6/19/2018
Works wonderfully. Use it a lot and couldn’t be happier .
by: Billy 10/19/2023
Great customer service and excellent pr oduct.
by: Chris10/05/2021
Disappointing. Although the manufacturing quality is consistent with Curt's normally high standards, the design leaves everything to be desired. There is not enough clearance above the trailer tongue coupler latch to mount a bike rack. Even if you somehow manage to overcome this, most bike racks won't clear a telescoping jack stand. I should have sent this one back!
Sierra K.
10/14/2021
A very valid issue. It can be done, but you will have to measure carefully to see if this piece will work with your set up. The measurement is 3 and 9 sixteenths of an inch from the top of shank to bottom of the accessory receiver. I recommend getting a bike rack with a rise as this will be the best option for you.
by: Doug T.07/20/2015
This was just what I was looking for to raise my cargo carrier above the level of my car exhaust and will work for my bike rack as well (not at the same time). It will also allow more room to open the rear lift gate. Product appears to be of high quality but I haven't had a chance to use it yet. Shipping was fast.
Doug T.
7/19/2016
Ive had the receiver about a year now and have used it several times. Its well built and and works for what I purchased it for.
by: Stan06/15/2018
I have never seen a hitch like this one, that I found on etrailer.com. I saw this hitch, and knew it would be perfect for my side by side, and it is. I can hook up to a small trailer, and then unhook, and slide in a feeder in the top receiver, and feed the roads of our hunting lease. This thing is perfect!!
Stan O.
6/15/2019
Perfect!
by: John H.02/02/2017
Very good service and shipping was on time. Good value for the quality of the ball mount receiver. I tow a car dolly behind my motor home and needed a place to mount my spare tire. Like the fact it's made in the US. very well built.
John H.
2/2/2018
I often dolly tow our vehicle behind our motorhome, but I cannot attach or detach the dolly from the ball mount without removing the bike rack mount receiver first, due to the height and the ball mount . I cannot release the tongue trailer coupler lever. Too tight of clearance. I wish the ball drop was at least 6 inches. This would allow for the dolly tongue trailer coupler lever to come all the way up without contacting the bottom of the bike rack or spare tire carrier receiver.
by: Tampa Doug10/15/2016
Maximize fun with this accessory! Made kayak trailer towing with a hitch mount bike rack easy and efficient.
Tampa D.
10/15/2017
Working great. Still going strong.
by: Wesley 09/12/2023
Perfect fit Excellent finish
by: Chris M03/23/2023
I have bought several items from etrailer. They always keep you informed of delivery status. The deliveries are always quite quick. The products are quality and top notch. I will buy from them again and highly recommend.
by: Ned08/10/2015
I originally thought this would work for a pop up camper and adding the bike rack. We have a Thule rack with a Jayco camper. It does not work at all for this set up. However, the product is excellant quality and delivery was prompt. I would recommend it for some other type of set up but not what I described above. I have to send it back.
Tom
9/1/2015
Does this not work due to the turning problem with the bikes coming in contact with the trailer or propane tank? I was thinking of getting this but not if that is the problem.
Rachael H.
9/1/2015
The effectiveness of the Curt Multi-Purpose ball mount # D210 used for both hitch mounted accessories is dependent on the configuration of the trailer, cargo on the trailer, and the hitch mounted accessories. Using this with a bike rack is always interesting and you have to account for the hitch location on the towing vehicle, the configuration of the bikes, and the trailer set up. It is very easy for turning radius to be effected by all of these things. We do have other options such as towing bike racks and trailer mounted bike racks that you might consider. I have provided links to both of these product categories for you to view and see what may work best for your specific application.
25
219
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Recommended Way to Carry 2 E-Bikes When Also Towing a Small Pop-Up CamperI may have a solution for you, but there is not anything available similar to the Stromberg Carlson # CC-275 that will give you the 150-lbs capacity you're looking for. Instead, you could use a dual hitch adapter like the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210, and then carry your bikes that way. This may not work if you've got a jack or propane tank on the front of the trailer frame, but it would provide you with a solution otherwise. It...
view full answer... - Compatibility of Curt Multipurpose Ball Mount with Hitch Height AdapterYou can use the Curt # D210 with an adapter, but it will reduce the tongue capacity of your trailer hitch receiver by 50%. If that is acceptable with your combination then I recommend the Malone 2" Dual Purpose Hitch Receiver # MPG544 which will give you 7-1/2 inches of height difference.
view full answer... - How To Carry Bikes While Towing With a Bike Rack Not Rated for Use On a Trailer The best option I have that would allow one to carry bikes and tow a trailer at the same time if the bike rack is not rated for use on a trailer is a multi-purpose ball mount, the Curt Multipurpose Ball Mount part # D210. That said, this option only works if the 2-1/4" drop that this ball mount offers will allow you to tow level or very close. If not, you would not really have any other good options aside for obtaining lighter bikes. I have attached a help article that goes over how to...
view full answer... - Can the Malone 2" Dual Purpose Hitch Receiver Be Used for TowingThe Malone 2" Dual Purpose Hitch Receiver part # MPG544 can be used for towing but you'll be limited to 4,000 lbs or 50% of the hitches weight capacity, whichever is lower. For example, if the trailer hitch was rated for 5,000 lbs then you'd have a new weight capacity of 2,500 lbs, not 4,000 lbs from the adapter or 5,000 lbs from the hitch. If you need to retain capacity then a better option is the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers part # D210.
view full answer... - Recommendation to Gain Ground Clearance When Carrying a Scooter Carrier and ScooterWhat I would recommend is the Curt MultiPurpose Ball mount part # D210. This product will give you 6 inches of rise for your carrier without cutting the tongue weight of your hitch in half like most hitch extenders do. Check out the review video I attached for this product.
view full answer... - Recommendation for Using the Thule DoubleTrack Bike Rack When Towing a TrailerWe have 2 options that will allow you to tow a trailer and use a bike rack. The shank on the Thule Doubletrack Pro XT Bike Carrier, item # TH92BJ, is not designed, or large enough, to accept a draw bar for towing a trailer. The first option, and probably the best, is to use a towing bike rack like the Thule Hitching Post Pro Rack, item # TH934XTR. this rack will allow you to carry up to 4 bikes and tow a trailer as long as the weight of the bikes, bike rack and trailer do not exceed the...
view full answer... - How do I use a Bike Rack and Pull a Trailer at the same timeWe carry a very handy 2 inch ball mount for this exact application. The part is # D210. The ball mount slides and pins into your hitch and the top receiver will accept 2 inch bike racks and hold them above the ball. The Ball Mount has a 500 lb tongue weight capacity, which means that the bike rack and the bikes on it as well as the trailer tongue weight cannot weigh more than 500 lbs or the tongue weight capacity of the hitch, whichever is lower. We also have a bike rack that clamps around...
view full answer... - Dual Receiver Hitch Adapter to Provide More Clearance Between Ball Mount and AccessoryThe MaxxTow Multi-Purpose Ball Mount # MT70066 does have 3-1/4-inches of rise and the similar Curt part # D210 offers only a little bit more clearance, 3-9/16-inches. On items like these the top receiver opening cannot be too much higher than the ball mount or weight capacity and strength will be reduced. If you use an item like the Malone Dual Purpose Hitch Receiver # MPG544, which has 7-1/2-inches of space between the two receivers, you will gain several more inches of clearance. Please...
view full answer...
- Curt Ball Mount # D210 Recommendation to Increase Ground Clearance for a Bike RackRoadmaster only tested the High Low Adapter part # RM-048-6 in flat towing setups. So while there is a very strong chance it would work just fine for what you are trying to do we can't safely recommend it for you. However, while this product would give you 6 inches of rise it also would push your bike rack out an additional 9-1/2 inches which would almost all but completely negate the ground clearance gained on a steep driveway. The Curt Multipurpose Ball Mount part # D210 would be a better...
view full answer... - Bike Rack Recommendation for Subaru Forester Towing PWC TrailerWe don't have a version of the # D210 that has the ball mount platform with a rise instead of a drop. I know you have a really nice Thule bike rack but the only solution we'd have would be a towing style bike rack like the Swagman Traveler XCS part # S64664 which can attach to the ball mount you end up using and gives you a platform bike rack for two bikes. For a ball mount then you'll want to first figure out what rise/drop you need. For info on how to do that check out the help article...
view full answer...
- Comparing Curt D210 and MaxxTow MT70066 Multipurpose Ball MountsThe MaxxTow # MT70066 and Curt # D210 multipurpose ball mounts differ in towing and tongue weight capacities as you noted and also in some dimensions. Overall they are very similar and both accept a hitch ball with a 1-inch shank like # 63845 but the MaxxTow has 1-5/8-inches of drop on its ball platform whereas the Curt has slightly more at 2-1/4-inches. Also, the Curt # D210 includes a pin and clip while the MaxxTow does not. On each part's page we include measured diagrams with many...
view full answer... - Will Curt Multipurpose Ball Mount with 2 Receiver Work with Cargo CarriersYes, you could definitely use the Curt Multipurpose Ball Mount with 2" Receiver # D210 with a cargo carrier and your pop-up camper. So long as you know you have the turning clearance (which depends on the size of your cargo carrier) that is exactly what this product is designed for. The ball mount is 12-1/2" from hitch pin hole to hitch ball mount and 7-1/2" to the receiver pin. This ball mount does come with a pin and clip but if you want to lock it to your hitch I recommend Trailer Hitch...
view full answer... - Bike Rack Recommendation for 5 Bikes While Towing a Pop Up CamperThe Curt Multipurpose Ball Mount # D210 would be an excellent choice to be used in conjunction with towing your current pop up trailer and a hitch mounted bike rack that has a carrying capacity of 5 bikes. The # D210 is compatible with and an existing 2 inch hitch and provides a 2 inch receiver for accessory use. This hitch has a tongue weight capacity of 750 pounds total, and a receiver capacity of 350 pounds. Therefore the combined weight of the bike rack and bikes cannot exceed 350...
view full answer... - Ball Mount to Allow Towing and Use of Hitch-Mounted AccessoryUse of any hitch extender/adapter like the Curt Dual 2-Inch Receiver Tube Adapter # D-192 will cause a loss of 50-percent of the rated hitch capacity. This happens precisely for the reason you alluded to: greater distance from the hitch tube to the actual weight load that is on it. A better option for you is part # D210. This item DOES NOT reduce hitch capacity but it does provide both a ball mount platform to allow you to install a hitch ball of the appropriate size to enable towing AND...
view full answer... - How To Carry 1-1/4 Receiver Accessory with Dual Hitch AdapterI have a solution for you, but to my knowledge there is not such a product available. There are dual receiver adapters that have the same size receivers on both ends, but I can't say that I've ever seen one with both a 1-1/4" and 2" receiver slot. Instead, you could use something like the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210 and pair it with the Brophy Hitch Reducer # HT02 to carry a 1-1/4" accessory on the top. You will have...
view full answer... - Highest Capacity E-Bike Bike Rack for Use w/ a Travel TrailerThanks for the picture! I spoke with my rep at Hollywood Racks and confirmed the information on our website. The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches item # HLY64FR is not compatible with travel trailers. The carrier is not built to withstand the extra bouncing and stress that comes with a bike rack being on the back of a travel trailer. Even though you have your Outdoors RV trailer's set up to reduce these issues the warranty on this bike rack is general...
view full answer...
- Dual Ball Mount Recommendation to Allow Trailer Towing and Carry Cargo CarrierHave you tried hooking up the trailer first and then once it's connected and the latch of the trailer is secured and in the down position then install the cargo carrier. Or you could replace your dual hitch with a # D210. If you check out the dimension picture I attached you would be able to see if it would give you more clearance.
view full answer...
- Towing a Trailer Level and Carrying Bikes at the Same TimeI have a solution but there isn't a mount like # D210 that has a rise to tow your trailer level. What you could do is use extra long ball mount # BH20 with a towing bike carrier such as # C18013. With this set up the most bikes you could carry is 3. The ball mount has a 3/4 inch rise but the tongue weight of the trailer and weight of the bikes will drop it down a little to compensate.
view full answer... - Towing a Vehicle on a Tow Dolly Behind a Motor Home and Carrying Bikes at the Same TimeCurt offers dual hitch receiver # D-192 but it does not have a drop. It is rated for 3,500 pounds gross towing weight and 350 pounds tongue weight. But using it will reduce the tongue weight capacity of the hitch by 50 percent. I would normally recommend going with # D210 but it only has a 2-1/4 inch drop. Another option is to use a ball mount with 8 inch drop # AMSC8 with a bike carrier such as # Y36FR. But this may or may not work depending on how far it is from the face of the receiver...
view full answer... - Recommended Way to Raise Height of Hitch Cargo CarrierOne way to raise the Curt cargo carrier part # C18153 would be to use a Curt hitch adapter part # D210. This has a second hitch opening above the ball mount platform which can give you additional height. Unlike other similar adapters it does not end up cutting the capacity of the hitch it is used in by 50% either.
view full answer... - Can Swagman XC Towing Bike Rack be Used with XTC Wheel HoopsYes, you can put the XTC wheel hoops, # P318, on the XC model rack, # S64664. There is a version of this rack that has this set up already, # S64650-EXT, which you mentioned, but it is not a towing bike rack. With the XTC wheel hoops mounted the maximum wheel base accepted is 68 inches. Using the multipurpose ball mount # D210, with extended rack # S64650-EXT, would work but in addition to costing more it would also make the rack closer to the trailer than the towing rack which would decrease...
view full answer... - Wall Thickness of the Curt Multipurpose Ball Mount # D210I went out to the warehouse and found that the wall thickness of the Curt Multipurpose Ball Mount # D210 is about 0.20 inches.
view full answer... - Is the Curt Multipurpose Ball Mount Available with More DropI do have a possible alternative option for you but the Curt Multipurpose Ball Mount part # D210 is not available with a 4" or 6" drop nor do we have anything similar. However, if you wanting to tow a trailer and carry a bike rack at the same time behind your motorhome then you can use the Curt Clamp-On 3 Bike Rack part # C18013 with most standard ball mounts like the Curt Ball Mount part # C45070. There is also options for a-frame trailers like the Stromberg Carlson Bike Bunk Trailer-Mounted...
view full answer... - Compatibility of Ball Mount and Cargo CarrierThe 23x60 Stromberg Carlson Cargo Carrier for 2" Hitches - Steel - 500 lbs # CC-100 will not allow you to add a receiver, but there are other options to let you tow your boat with a cargo carrier. The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210 will allow you to both tow and carry a bike rack or cargo carrier if the tongue of your trailer is long enough which a boat trailer likely is. I recommend using a carrier with a rise in the...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Installed by:
Andrew K
Installed by:
Cole B
Installed by:
Shane T
Video by:
Joshua S
Video by:
Dustin K
Updated by:
Rachael H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
1/27/2024
I actually was never able to use it. It was bought to use with my car dolly and bike rack. It turned out the car dolly hitch was in the way of the bike receptor. So I have a brand new, never used receptor.