2002 Ford F-53 Wheel Liners

Hey Dustin, welcome back! The Timbren SES #TFRSDJ will offer you more support over the severe service kit #TFRTT350J. Are you experiencing squat with your current Timbrens? If you are then it would be worth upgrading. If you really aren't, then…

Hey Simon, thanks for reaching out! The Adjustable Width Trailer Hitch Receiver #C13704 you were looking at is a great option because it's designed to fit within your parameters and it has 5K towing and 500 lb tongue weight ratings. If you're…

You will need either the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver with 7" Brackets #41990-07 or #41990-16 with 16" tall brackets. There is not a custom fit receiver for the 2006 Ford E-450 bus. These receivers will fit a…

Yes, it will! I checked with Phoenix USA and their Front Hub Cover w/ Pop Out item #PXQ822F, you were looking at, will work with your 2008 Fleetwood Southwind with 8 lug 22.5" wheels since your factory lug nuts are 33mm.

Hey Gary, I'm a little confused as to what you're asking. Are you looking for front or rear hub cover? All of the 19.5" caps we have will be the 10 lug like I think you're wanting. Now that being said, technically these covers are…

Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…

The XLT refers to the style of the Westin bumper. I have included a diagram that shows the different bumpers to better illustrate how they are different. Bumper #21007-92230 will fit your 1971 Ford F-100 though you may find that the styling of bumper…

Hey Rick, thanks for all of the information! It helps to pin down the exact replacement bag you need. The air bag kit you have on your 2000 Ford F-53 is the Firestone Ride-Rite Air Helper Springs #F2170, and to just replace the bag you need the part…

I've attached some dimensions below to help you determine fitment of the Brophy Camper Scissor Steps #AS24 with your truck bed camper. The mounting bracket is 24" long x 1" tall (1-3/8" tall if you include the V-Clamps) so…

Hello Thomas, thanks for reaching out. The Wheel Masters Wheel Covers #WM3160B0 will work on your 1996 F250 as long as it also uses 16" 8-lug wheels.

The Curt Custom Base Plate Kit #C59JR can not be used in the fashion you have pictured. Not only is it unsafe but it wouldn't connect to the tow bar the way you have it. Based on your picture it looks like you do not have the modular bumper and…

I can definitely help you determine what bolt pattern you have. The most common 8-bolt patterns are 8 on 6-1/2 and 8 on 275mm. With that being said, the Phoenix USA Rear Hub Cover w/ Pop Out #PXQ822R only fits conventional wheels that have an 8 on…