Chrysler 200 Trunk Bike Rack

Thule Passage Trunk Bike Racks Review - 2015 Chrysler 200

Today, in our 2015 Chrysler 200, we're going to be test-fitting the Thule Passage 2, Part Number TH910XT. As you can see, we already have a bike installed on the rack. Let's take a closer look at it and show off some of the features. How the bike attaches to the rack, you're going to have three points of contact, all of them on the bike's frame. You're going to have the two straps up here and the one strap off to the side here, which is going to serve as an anti-sway strap, which will keep it from moving back and forth possibly hitting the bike rack or the bike in front of it. Let's go ahead and take that off and set it off to the side. Now with the straps, it's always a good practice to put them back in place once you take them off because you don't want them flapping around while you're driving and you don't want to lose them while you're driving. Next, I'm going to go ahead and give you some measurements here..well actually one measurement. And it's going to be how far the bike rack itself sticks out from the vehicle once it's installed.

Thule Archway Trunk Bike Racks Review - 2015 Chrysler 200

Today on our 2015 Chrysler 200, we are going to be test fitting the Thule XT2 Bike Rack for Trunk Mounts, Part Number TH9009XT. As you can see, we already have a bike installed on the rack. Let's take a closer look and show off some of the features. Now the bike is actually attached to the rack, you are going to have three points of contact to your bike's frame. You are going to have two straps up top and one off to the side, which is going to serve as an anti-sway strap which will keep it from going back and forth possibly hitting the bike rack or the bike in front and damaging it. Let's go ahead and take that off. Go ahead and set that off to the side.

Saris Bones Trunk Bike Racks Review - 2015 Chrysler 200

Today on our 2015 Chrysler 200, we're going to be test fitting the Saris Bones 3 bike rack, part number SA801. As you can see we already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. How the bike is actually attached to the rack, you're going to have three points of contact to your bike's frame. You're going to have these two straps up top here, and this one off to the side down here. This is going to act as kind of a anti-sway strap to keep it from going back and forth possibly hitting the bikes in front of it. Let's go ahead and take that off. To loosen these up, you just push these buttons up top here. And just work the strap out.

Hollywood Racks Expedition Trunk Bike Racks Review - 2015 Chrysler 200

Today in this 2015 Chrysler 200, we're going to be test-fitting the Hollywood Racks Expedition 2 Bike Rack, part number HRF6-2. As you can see, we already have a bike attached to the rack. Let's take a closer look and show off some of the features. Now how the bike is attached to the rack, you're going to have three points of contact with your bike's frame. You're going to have two straps up top, and one off to the side here, which is going to act as an anti-sway strap to keep it moving back and forth possibly hitting the bike rack itself or the bike in front of it. Let's go and take the bike off and set it aside.

Hollywood Racks Baja Trunk Bike Racks Review - 2015 Chrysler 200

Today on this 2015 Chrysler 200, we're going to be test filling the Hollywood rack Baja 2 bike rack, part #HRB2. As you can see, we have a bike guard already installed on the rack. Let's go ahead and take a closer look and show off some of the features. Now as you can see, there's going to be 3 points of contact to your bike's frame here. You're going to have 2 straps up top plus a strap off to the side here which is going to be your anti sway strap to keep it from going back and forth, possibly hitting the bike rack itself of the bike in front of it. Let's go ahead and remove the straps and take the bike off. Now when removing the straps, it's always a good habit to get into to actually put them back in place once you're done, primarily so they're not flapping around while you're driving and you don't lose them while you're driving.

Thule Trunk Bike Racks Review - 2015 Chrysler 200

Today in this 2015 Chrysler 200, we're going to be test-fitting the Thule Raceway Pro 2-Bike Rack for Trunks, part number TH9001PRO. As you can see, we already have a bike installed on the rack. Let's take a closer look and show off some of the features. Now to have a bike as attached to the rack, you're going to have three points of contact to the bike's frame. You're going to have two straps up top, and one strap off to the side here, which is going to act as kind of anti-sway strap to keep it from coming back and forth, possibly hitting the bike rack or the bike in front of it. For security, there's also an integrated cable lock that you would pull over the bikes and insert right here and lock, so your bikes would be nice and secure while you drive. Let's go and take the bike off. Go ahead and set it up to the side out of the way. Now, with the straps, once you take them off you want to reinstall them because you don't want them flapping around while you're driving, you don't want to lose them while you're driving.

Thule Trunk Bike Racks Review - 2015 Chrysler 200

Today on our 2015 Chrysler 200 we're going to be test fitting the Thule Gateway XT 2-Bike Rack part number TH9006XT. As you can see we already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. Now how the bike is actually attached to the rack, you're going to have three points of contact with your bikes frame. You're going to have two straps up top and one off to the side here which is going to serve as an anti-sway strap to keep it from moving back and forth and possibly hitting the bike rack or the bike in front of it. Let's go ahead and take that off. We'll set that off to the side.

Thule Archway Trunk Mount Bike Rack Review - 2013 Chrysler 200

Today on our 2013 Chrysler 200, we'll be test fitting the Thule Archway 2 Bike Rack part number TH9009XT. We'll place our fit dial to fit number seven according to the instructions, then we'll place the bike rack directly under the trunk of our Chrysler. We'll take our top hooks and set them into the top part of our trunk, then we'll take our side hooks and set them into the side part of our trunk and the bottom hooks at the bottom. We'll then snag down each strap by pulling on it. Once we have those snag, we can then go back around and pull each strap until it's tight and secure. Pulling them snag first keeps us from losing our position. With all the straps tight, our bike rack is secure and then we can undo the levers on the side of our carrier to swing out our dual-arms.

Hollywood Racks Expedition Trunk Bike Rack Review - 2013 Chrysler 200

Hollywood Racks Baja 2 Trunk Bike Rack Review - 2013 Chrysler 200

Today, on our 2013 Chrysler 200 we'll be test fitting the Hollywood Racks Baja two-bike rackpart number HRB2. We'll begin our test fitby placing our bike rack directly onto the trunk of our Chrysler. We'll use the levers on the side of the bike rack to adjust our top arm which also adjusts our dual arms that hold our bike. We want to make sure that our dual arms are sitting straight out or at a slight upright angle. This will determine the location of our top arm. Once we have it set correctly, we can then close the levers on the side to secure it into position.

Yakima QuickBack 2 Bike Rack Review - 2013 Chrysler 200

Today on our 2013 Chrysler 200 well be test fitting the Yakima Quick Back Trunk Mounted 2-Bike Carrier, part number Y02621. Now to begin out test fit well set the carrier on to the vehicle. Well put the top hook to the top part of the truck, the side hooks to the side part of the trunk just above the tail lights in the bottom hook to the bottom part of the trunk. Well then tight it on the straps to secure the carrier to the vehicle. After securing the excess slack were ready to load our bike. Well loosen up the red knob on the right-hand side of the carrier to swing the cradle arms out.

Thule Raceway Platform Trunk Bike Rack Review - 2013 Chrysler 200

Today on our 2013 Chrysler 200, well be test fitting the Thule Raceway Platform-Style Trunk Mounted 2 Bike Carrier, part number TH9003. Now before we begin our test fit, well first need to refer to Thules fit guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial, well place the carrier onto the vehicle. Well put the top hooks to part of the trunk and the bottom hooks to the bottom part of the trunk. Well turn the knobs on the left and right hand side of the carrier to tighten down the straps to secure the carrier to the vehicle. Once the carrier is secure, were ready to load our bike. Well raise the frame hooks and lower the platform. Well loosen up the wheel trays and slide them out and undo straps.

Thule Raceway Trunk Bike Rack Review - 2013 Chrysler 200

Today on our 2013 Chrysler 200, well be test fitting the Thule Raceway Trunk Mounted Two Bike Carrier, part number TH9001. Now before we begin our test fit well first need to refer to the Thule Fit Guide or the included instructions to determine what number our fit dial should be at. Well set our fit dial and place the carrier onto the vehicle. Well put the top hooks to the top part of the trunk and the bottom hooks to the bottom part of the trunk. Well turn the grey knob to the left and right hand side of the carrier to tighten down the straps and secure the carrier to the vehicle. Once the carrier is secured to the vehicle were ready to load our bike.

Thule Passage Trunk Mounted Bike Rack Review - 2013 Chrysler 200

Today on our 2013 Chrysler 200, well be test fitting the Thule Passage Trunk Mounted Two Bike Carrier, part number TH910XT. Now before we begin our test fit well first need to refer to the Thule Fit Guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial well place the carrier onto the vehicle. Well put the top straps to the top part of the trunk, the side straps to the side part of the trunk just above the taillights, and the bottom straps to the bottom part of the trunk. Well then tighten on the straps to secure the carrier to the vehicle. After securing the excess slack were ready to load our bike.

Thule Gateway Trunk Mount Bike Rack Review - 2013 Chrysler 200

Today on our 2013 Chrysler 200 well be test fitting the Thule Gateway trunk mounted two bike carrier, part number TH9006XT. Before we begin our test fit well first need to refer to the Thule fit guide or the included instructions to determine what number our fit dial should be at. After setting our fit dial well place the carrier onto the vehicle. Well put the top hooks at the top part of the trunk, the side hooks to the side part of the trunk just above the taillights and the bottom hooks to the bottom part of the trunk. Well then tighten down the straps to secure the carrier to the vehicle. Well secure the excess slack, and were ready to load our bike.