View Cart

Chevrolet Cobalt Roof Rack

Select Vehicle Year

  
Roof Rack

Available Years for Chevrolet Cobalt Roof Rack


Roof Racks

Get all the room you need inside your car by putting your bikes, cargo or kayak on your rooftop. Thule, Yakima, Rhino Rack, Rola and Malone roof racks are built to the highest quality specifications to accommodate all your cargo needs.

Thule, Yakima and Rhino Rack offer roof bike racks in the traditional fork mount style or in the easy to load, wheel mount style.

Cargo baskets from Rola, Rhino Rack, Yakima and Thule offer a great looking way to get your cargo out of your vehicle and safely carry it on your trip. Roof cargo bags and roof boxes can also be used if you would like some waterproof or water resistant protection for your cargo.

If you need to carry bulky skis, snowboards, kayak or a canoe, putting it on the roof is a great option to unclutter your vehicle and keep the gear safe. We offer Yakima and Thule ski racks and watersport carriers that are sturdy and safe for all your cargo needs.




Roof Top Cargo Racks and Carriers

We offer custom fit roof racks from Thule, Yakima, Rhino Rack, Rola, Inno and Whispbar that will be a perfect fit for your vehicle. Just enter your year make and model above. We also offer a full line of roof rack accessories, including roof bike racks, roof cargo baskets, roof cargo boxes, kayak and canoe carriers, roof bags, ski racks and snowboard racks. If you need to do some roof rack repairs, we also carry replacement parts for all the roof and cargo racks.


Roof Rack Accessories



Roof Rack Manufacturers



Search For Custom Fit Chevrolet Cobalt Accessories
Select A Category Below



Chevrolet Cobalt Roof Rack Videos

Rhino Rack Roof Rack Review - 2010 Chevrolet Cobalt

Today on this 2010 Chevrolet Cobalt we're going to be test fitting the Rhino-Rack Roof Rack System. It consists of part numbers RRVA118B, which would be the crossbars, as well as the legs, part number RRRLKVA, and then the clamps, part number DK181. This is specific to this vehicle. Now if you look at the bars here at the front which we've already installed, they are aerodynamic, which will cut down wind noise and drag, and both the ends caps as well as the legs themselves are lockable to secure it to your vehicle once you have it installed. Let's show you how the rear one installs now. We kind of have a rear one partially put together. We have the 1 side done already. Now I'll show you the other side.



Yakima Q Tower Roof Rack Installation - 2010 Chevrolet Cobalt

Today on our 2010 Chevy Cobalt, well be test fitting the Yakima Round Bar Roof Racking system, part numbers Y00408, Y00722 and Y00124.Now with our crossbars and feet already assembled, we'll first open up the drivers side and passenger side doors of the vehicle and place the first crossbar onto the vehicle.Then, according to Yakimas fit look up or the included instructions, we will measure from the first part of the glass to the first part of the foot. We will need to measure both the passenger and drivers side of the vehicle to ensure that the crossbar is perpendicular.Once we have established this measurement, we can turn the bolt in the inside of the tower and tighten down the lever to secure the crossbar to the vehicle. It is important to tighten down each side a little bit at a time so one tower does not favor one side of the vehicle. After clamping it down, the crossbar is secured to the vehicle and we'll go ahead and close the doors and were ready for our rear crossbar.We'll open up the doors of the rear of the vehicle, place the rear crossbar on top of the vehicle and again according to Yakima fit look up or the included instructions, we'll measure the crossbar spread. Now the crossbar spread is an important measurement when choosing roof rack accessories. We'll measure from the center of the front crossbar to the center of the rear crossbar and we'll do this for both the passenger and drivers side of the vehicle.



Rhino-Rack Aero Roof Rack Installation - 2009 Chevrolet Cobalt

Today on our 2009 Chevrolet Cobalt Two-Door, we'll be test fitting a Rhino Rack Roof Rack System. We'll be using the DA118 Bars and the fit kit for our vehicle is part number DK182. Now, the bars are also available in black and that's part number DA118B. We've already got our roof rack assembled according to the instructions and now we're ready to fit it up on the vehicle. First thing we need to do is open our doors. We'll take our front bar assembly and set it up on top of our roof.



Yakima Q Tower Roof Rack Installation - 2010 Chevrolet Cobalt

Today on this 2010 Chevrolet Cobalt were going to be installing a Yakima roof rack system. We already have our crossbar assemblies put together and now were ready to mount them up on the vehicle. The first thing we need to do is open both front doors. Next well set our front crossbar assembly up on top of the roof. When we place the front assembly on the roof we need to make sure that its centered left to right and its also the proper distance from windshield. From the edge of the windshield to the front edge of the Q Tower we need to measure seven inches.



Rhino Rack Aero Roof Rack Installation - 2010 Chevrolet Cobalt

Today on this 2010 Chevrolet Cobalt we're going to be test fitting a Rhino Rack Roof Rack System. We already have our crossbar assemblies put together according to the instructions so now we're ready to mount them up on top of the vehicle. The first thing we need to do is open both front doors. Next we'll take our crossbar assembly and lay it up on top of the roof. We'll measure from the center of the seam where the two doors meet to the center of the front bar. This measurement needs to be 250 mm or 9,27/32".





Chevrolet Cobalt Roof Bike Racks Videos

Rhino Rack MountainTrail Roof Bike Racks Review - 2010 Chevrolet Cobalt

Today on this 2010 Chevrolet Cobalt we're going to be test fitting the Rhino Rack Mountain Trail Bike Rack. Part number RVC035. As you can see we already have the bike attached to the rack, let's go ahead and take a closer look. Now, it's actually attached to the rack, you're going to have two points of contact. We're going to have the strap here that holds the rear wheel in place, then we have the fork mount up front with the skewer that holds the front in place. Now, the skewer is lockable so once this is installed you can lock it in place so no one can take your bike. Let's go ahead and take the bike off and set it aside. To loosen up the strap back here you simply push in on this button here, pull the strap out.



Yakima ForkLift Roof Mounted Bike Rack Review - 2010 Chevrolet Cobalt

Today on our 2010 Chevy Cobalt, well be test fitting the Yakima Forklift Roof Mounted Bike Carrier, part number Y02098.Now to begin our test fit, we'll set the carrier onto the vehicles crossbars. We'll move to the front of the carrier where we'll loosen up the front bracket and bring it around the underside of the front crossbar. We'll loosen up the black wing nut to allow us to do this.We'll then move to the rear of the carrier where we will again loosen up the black wing nut, bring the bracket around the rear of the crossbar. We'll then tighten down the black wing nut to secure the rear of the carrier to the vehicles rear crossbar.We will then move back up to the front of the vehicle, where we will loosen up the skewer. The skewer of this carrier does have reverse threads. After removing the skewer, itll allow us to slide the black cap back to have access to the wing nut.



RockyMounts TieRod Roof Bike Rack Review - 2009 Chevrolet Cobalt

Today on our 2009 Chevrolet Cobalt Two-Door, we'll be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. We'll take our carrier and set it up on top of our crossbars. At the front, we want to make sure to fit the head properly over the front crossbar and feed the straps around the bar. We'll fit them back into the head and use the Allen key to tighten them down. We'll then reinstall our cover and then make sure that the skewer is open. At the rear of the carrier, we'll fit our clamp around the bar and use the wing nuts to tighten it down.





Chevrolet Cobalt Ski and Snowboard Racks Videos

Yakima FatCat Ski and Snowboard Carrier Review - 2010 Chevrolet Cobalt

Today on our 2010 Chevy Cobalt, well be test fitting the Yakima Fatcat 6 Locking Rooftop Ski and Snowboard Carrier, part number Y03088.Now to begin our test fit, we'll set the first part of the carrier onto the front crossbar. We'll bring the rubber coated metal straps around the underside of the front crossbar. We'll open up the carrier to have access to the clamp on the inside. We'll clamp the end of the rubber coated steel strap into position and on the inside of the carrier, tighten down the lever and snap them into position. We'll then repeat this for the other side of the carrier.Note, that you cannot tighten down to secure the carrier to the crossbars without having access to the levers on the inside of the carrier.Now that the front carrier is secured to the vehicle, we'll set the rear part of the carrier onto the rear crossbar and we'll repeat the same steps. By opening up the carrier, bringing the rubber coated steel straps around the underside of the crossbar and snapping them into position.We'll then tighten down the levers on the inside of the carrier and secure them.





Chevrolet Cobalt Roof Rack Questions and Answers



Chevrolet Cobalt Watersport Carriers Questions and Answers