What Roof Rack Kits Will Work with the RetraxPRO XR Hard Tonneau Covers

Question

Question:

Hi, is it possible to list the options that are available for the racks complete kit or collection of part #s for thule, yakima, or rhino rack that will fit the tracks of the Retrax Pro XR?

asked by: Jim

0

Expert Reply:

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part # RTT-80243 for your 2019 Ram 1500.

Rhino-Rack Vortex Crossbar System part # RRVA180B-RRRLT600
Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part # Y01151-5955
Yakima OutPost HD Mid-Height Truck Rack part # Y01152-5955
Thule ProBar Evo Crossbar System part # TH713700, part # TH460R, and part # THKIT3101 (part # TH450400)

I recommend the Rhino-Rack Vortex Crossbar System because it is the best bang for your buck. The other systems are great options as well but there aren't any features in my mind that justify the price difference save for the OverHaul HD Adjustable Truck Bed Ladder Rack which is a bit different overall but if you prefer Thule or Yakima you will not be disappointed.

expert reply by: Conner L

0

Rob H.

9/3/2024

Trying to find a Thule T Slot fixpoint to marry up my Retrax TSlot bedcover and my Thule Evo Fixpoint. Any suggestions

Reply

Answer 1

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 2

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long #RRVA180B-RRRLT600. This system will be approximately 4-1/4" to the top of the…

view full answer...

Answer 3

I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall #RLTP-2 will not fit the…

view full answer...

Answer 4

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 5

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 6

The Thule SnowPack ski carrier #TH7325 will fit the Rhino-Rack Vortex aero crossbars so they are compatible with each other. The Rhino-Rack and Thule bars are similar in width and height so the carrier will fit without any modification or special…

view full answer...

Answer 7

Hey Brian, sorry about the confusion! So the t-slots of the Pace Edwards Full-Metal JackRabbit #PE36CV are compatible with the "non-commercial" ladder racks as well like the Yakima Overhaul for Tonneau Cover Rails #Y01151-5755. The T-slots…

view full answer...

Answer 8

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 9

Hi Brian; the channel is 7/8" wide x 1/4" tall and the opening at the top is 7/16" wide. I went ahead and attached a diagram below with the measurements. The spacers #RRQMVA25 to clear the handle are the only other thing you will need…

view full answer...

Answer 10

Hey Peter, There unfortunately are no type of extensions for the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. There are just spacers for it so the crossbars sit up higher from the Retrax XR…

view full answer...

Answer 11

The bolt to bolt spacing on the Replacement U-Bolt for the Thule Sidekick item #TH02943 is 4". It is 2" deep overall. I have linked a diagram below that will show you these measurements and a couple more. They are different dimensions along…

view full answer...

Answer 12

We have previously confirmed with Thule (the manufacturer of this cargo box) that the correct replacement mounting hardware for your Sears X-Cargo 28-7271 is the Replacement Hardware Kit #SR05587 which does include the U-bolts required for this cargo…

view full answer...

What Roof Rack Kits Will Work with the RetraxPRO XR Hard Tonneau Covers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching