Custom Fit 2019 Ford Ranger Accessories

For your 2019 Ford Ranger the Draw Tite hitch part #DT73GR is the hitch I recommend over the Curt #C13417 because it has higher towing capacities and it has a bracket built into it for trailer wiring. Aside from that they are very similar and install…

Hey Kathy, thanks for reaching out! I recommend using the 58" Malone AirFlow2 Roof Rack #MAL84AR for your 2022 Subaru Forester Wilderness as it will have enough overhang to comfortably fit and use both a cargo box and an awning. If you don't…

Hello Rick, thanks for reaching out. I can confirm that the etrailer Class 3 Hitch #e63ZR will fit your 2023 Ford Ranger Tremor and the OEM tow hooks will NOT need to be removed. The hitch will clear easily. Take a look at the picture below. This…

Hey Rob! To add a 5-way connector to your Sienna you'll need the Curt Trailer Connector Adapter item #C57187. The blue wire will be spliced into the reverse light circuit. The easiest place to find the reverse light circuit is the wire loom that…

Good question, and thanks for the photo. I verified for you that the chain hooks on your 2022 Ford Ranger do NOT have to be removed in order to install the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver…

In order to charge the battery on a 2019 Ford Ranger while in tow I recommend the Roadmaster Battery Charge Line Kit for Towed Vehicles part #RM-156-25. The connection can then be bridged with the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit part…

You can definitely add both the RAS Custom Leaf Spring Enhancement Kit #RAS3623-GT as well as the SumoSprings Solo Custom Helper Springs #SSR-121-40 to not only give you a much smoother driving experience but also help fight sway from high winds or…

From all the info I could find, the 2020 Ranger and the 2021 Ranger both use the same stock bumper. With that being said, the 7 Way plug that is included with the Curt #C56431 can definitely be replaced with the 7 Way plug from the #HM40975.

The handle is actually the on/off switch for the unit and the bolt under the handle is the tension adjustment bolt. You will need to turn the On/Off handle clockwise (tighter) until the handle will stay firmly in place parallel with the main body of…

The switch you are referring to that was shown in the review video of the Aries ActionTrac Motorized Running Boards #AA3025165 is not included with the running boards but can be added with the Custom Mounting Kit for Aries ActionTrac #AA3025171. The…

I checked with Timbren, the Timbren Rear Suspension Enhancement System part #TFRRGR is a confirmed fit for a 2023 Ford Ranger with Tremor Package. These feature a simple bolt-on install without any drilling required. They will do a great job of…

The wiring of the Replacement Solenoid Valve #T4748800 is ran to the reverse light circuit of the trailer's wiring connector. Basically one wire will get run to the reverse light circuit and the other wire will get grounded on the trailer frame.…