Hey Keith! I just got your questions so I'll address everything on this one. All of the replacement AC units have switched to the new R32 refrigerant so a complete replacement is necessary. This will include a wall thermostat so you don't…
Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…
Hey Cory! Yes, the Global Link RV Baggage Door Slam Latch #295-000015 will fit with a 1-1/4" thick door. If you don't have a mounting plate then you'll also need the part #295-000016 to complete the installation.
Thanks for the picture of your compartment latch. It looks like a standard RV baggage door slam latch so what you'd need for a replacement would be the part #295-000078 and you'd be set.
For your motorhome built on a 2018 Mercedes-Benz Sprinter 3500 we have great suspension enhancement kits available but none that use air bags. Instead the kit I would recommend is the SumoSprings kit part #SSF-106-47 which is similar to the Timbren…
Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. This…
Hey Clay, thanks for reaching out! The Specialty Recreation RV Shower Pan #SR23RR is actually a 24"x24" shower pan (an update has been sent in) so it sounds like you're looking for the Better Bath RV Shower Pan #LC210367 instead. This…
I have attached a drawing showing the dimensions of the drain hole location. It is 6-1/2" from the closest edge and centered 16" long ways, and the hole dimension is 2". I would recommend the JR Products #3729495-211-022 chrome plated…
Thanks for the pictures! The best hitch for your 2023 Mercedes-Benz Sprinter 2500 is the etrailer item #e82TR. This hitch is custom fit and bolts to your Mercedes with included hardware. This is a class III hitch with a 2" receiver. It has a…
As long as your 2020 Sprinter 2500 with the 170 inch wheelbase and standard bumper isn't a passenger van and the frame members do NOT measure 30-3/8 inches apart measured outside of frame to outside of frame, the Curt Class III hitch, part…
Hey Pablo, If your 2020 Mercedes-Benz Sprinter 2500 has a 144" or 170" wheelbase with a standard bumper you'll need the Draw-Tite Max-Frame Trailer Hitch Receiver #75549. If you have a 144" or 170" wheelbase with a factory…
The difference between our hitches that fit your 2023 Mercedes-Benz Sprinter 2500 cargo van have to do with what kind of bumper you have: - Standard Bumper #e76AR - Factory Step Bumper #e82TR Please note these fit unless you have the 30-3/8"…
