Custom Fit 2009 Ford Escape Accessories

We do have replacement hardware for the Curt #13650. The bolts are easy to come by, but since you need the square hole spacers you'll have to get the entire kit. What you need is the Replacement Hardware Kit for Trailer Hitches #RHK. Enter the…

This key may work with your Sears X-Cargo Sport 20 Cargo Box, but the lock on the cargo box must have same key number stamped on the face of the lock (see photo). The X-Cargo Sport 20 was made by Thule and Thule used their locking system with these…

We do offer replacement parts for your Sears X-Cargo 20-SV rooftop cargo box. For a set of 2 locks and 2 keys you can use part #SR03807. This will work if the locks look the same. There is a lock nut on the back of the lock assembly that will need to…

First thing you would need for your 2005 Ford Escape is a front hitch like the Curt Hitch part #31650 that has been confirmed as a fit for your vehicle. For a snow plow I would recommend the K2 #K2AVAL8219.

I spoke with my contact at Curt and he told me that the Curt Trailer Hitch, #C13651, does sit lower to the ground than the Curt Hitch, #13650. Both trailer hitches will fit the 2005 to 2011 Ford Escape without a factory hitch, but the #C13651 will…

The Ultra-Fab Ultra Scissor Jacks part #UF48-979002 can be used with a power drill no problem and this will not void the lifetime warranty. In fact, Ultra-Fab even offers the Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks part…

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

Per your request, I have attached the installation instructions for the Roadmaster Classic Base Plate Kit, Item #1003-1, for your 1988 Samurai. There is no drilling needed per the instructions because you will use the existing holes on your Suzuki. I…

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires experience…

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

I believe you are referring to the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles #e77SR. Since your boat alone weighs in at 1,900 lbs you would want something beefier as the suspension supports the weight of the trailer as well. The best way to…