Videos
for Nissan Frontier Owners
Help Articles
for Nissan Frontier Owners
Expert Answers
for Nissan Frontier Owners
Hey Ken, you are totally accurate to notice there is kind of an odd strange lack of weight distribution system options around the 500-600 lb tongue weight range. With that said we do have the Curt system part #C95MJ that has a 300-800 lb tongue…
view full answer...Hey Russ, For your Legend Deluxe v-nose trailer, you can use Curt TruTrack 2P Weight Distribution System w/ Sway Control #C95MJ. I like this one for you because your tongue weight rating falls in between the minimum and maximums of 500-800 lbs. and…
view full answer...Hey Dave, thanks for reaching out. That's a good call looking into a WD hitch. It will make a big difference in sway especially when you have semis blowing past you. For a 3,600 lb trailer I recommend the following: - Curt TruTrack 2P Weight…
view full answer...Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…
view full answer...Hey Mark, welcome back! This is very much a case of "you get what you pay for." The Curt TruTrack 2P #C95MJ you looked at is a good option if you tow your trailer a short distance once or twice a year. If you tow with any frequency and you…
view full answer...Hey Vernon, The best way to reduce tongue weight if you have to much is using a weight distribution system like #C95MJ. This system is going to evenly distribute the weight between the trailer and the towing vehicle taking stress off of the rear axle…
view full answer...If your 2011 Yukon XL already has the tow package you're well equipped to tow a Forest River E-Pro 19FD with a 600-lbs tongue weight. It sounds like you might be in need of a weight distribution system to help keep the rear end from sagging too…
view full answer...I can absolutely tell you the difference between Yakima OutPost HD Overland ladder rack and the Yakima OverHaul HD ladder rack, and both are indeed available with 68 inch crossbars, as well as a tonneau cover adapter with the following parts: -…
view full answer...Sometimes you can use accessories from other manufactures that will work, but the ones you were looking at #RR72XB are 8mm x 16.5mm so they will fit very snug. Here are the T-Slot dimensions so you can see exactly how much products are compatible.…
view full answer...If you are looking for crossbars that can accommodate the 12mm T-slots, the closest confirmed top channels we have are Yakima crossbars like the Yakima HD Crossbars - Aluminum - Black - 68" #Y01158 or Rhino-Rack crossbars like the Rhino-Rack…
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...











































