Replacement Round Nut for Thule Carriers

Ask the Experts about this Thule Accessories and Parts

Do you have a question about this Accessories and Part?

• Replacement Clamps For Thule Ski And Snowboard Carrier
  
• The Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks, # 7533998, along with the Replacement Round Nut for Thule Carriers, # 853-5439, you mentioned is the fit for the Thule Pull Top Slide-Out Ski and Snowboard Carrier. The Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks, # TH7520970001, you referenced as well is not a fit for your carrier.
  view full answer...


• Replacement Mounting Brackets for 724/725 Thule Ski and Snowboard Racks
  
• I contacted Thule about your older Ski and Snowboard rack and my contact said that the only replacement mounting brackets available for older racks is the Kit # 7533998, that you referenced. They said that this will only fit on the older 724 or 725 Ski and Snowboard Racks. You will also need the Replacement Round Nut (4 of them; one for each mounting bracket), part # 853-5439, to install this kit. Other than that you will not need anything else.
  view full answer...


• Mounting Hardware Only for Thule Hullavator Kayak Carrier
  
• I believe I know what you are wanting to do and for this you would just need two of the Replacement Bar Mount Assembly # 7521741001. This is the piece that gets installed onto the roof rack crossbar to which the lift arm and cradle assemblies for the Thule Hullavator # TH898 attach. To install the new bar mounts to square crossbars bars you will need 4 each of the Carriage Bolt # 915-0622-54, Washer # 951061254, and Round Nut # 853-5439. If you are using integrated T-channels on aero-style...
  view full answer...


• Does Replacement Thule Flat Top Carrier T-Bolt # 853208904 Fit TracRac TracONE Crossbar
  
• Thule recently redesigned all of the TracRac ladder racks so as long as your TracRac TracONE says "Thule" in front of it (physically on the bar) then the Replacement Square Head Bolt # 853208904 will fit the T-Slot and the Round Nut # 853-5439 is what you are looking for. I am not sure if the Thule Flat Top Ski and Snowboard Carrier will fit though as these crossbars have a slightly different design than the aero bars that Thule makes for a standard roof rack. If you have an older TracRac...
  view full answer...


• Needing Additional Hardware for my Thule Ski Rack Mounting Kit
  
• The Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 comes with 8 screws of one size, 4 screws of another length, 4 washers, and 2 tools. If you need the round nut that you saw in the instructions as an additional security measure, then you will want the Replacement Round Nut for Thule Carriers # 853-5439. You will likely need 4 of these so you have one for each mounting bracket. You will not need any additional parts like bushings according to Thule.
  view full answer...


• Size of T-Bolt in Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge # THXADAPT12
  
• The Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge Bars, # THXADAPT12, contains 4 - M6 x 22mm T-bolts and nuts. The Replacement Square Head Bolt for Thule Flat Top Ski and Snowboard Carrier, # 853208904, is a M6 x 13mm T-bolt so this is not the same bolt that is included with part # THXADAPT12.
  view full answer...


• Replacement Mounting Parts for Thule Flat Top Ski/Snowboard Carrier
  
• Thank you for the photo of your Thule ski/snowboard carrier. Based on review of this it appears you have their Flat Top carrier. The correct replacement mounting parts for this snowboard rack to allow installation on your square Thule crossbars are # 7533998 and # 853-5439. I confirmed these parts with my contact at Thule.
  view full answer...


• Mounting Kit To Attach Older Thule Ski Rack To Factory Crossbars On 2016 Toyota 4Runner
  
• The mounting kit, part # 7533998 is the kit you need to mount your TH725 ski rack to the factory crossbars on your 2016 4Runner. I confirmed this is the kit you need from my contact at Thule. When installing this kit on your crossbars you will need to use the original nuts that came with your ski rack. If you need replacements you can order part # 853-5439.
  view full answer...


• Replacement Hardware for a Thule Prologue or Peloton Roof Mount Bike Rack
  
• The replacement u-bolt # TH853-5420-02 is just 1 u-bolt and no other hardware. We do have other hardware that you might be looking for. The carriage bolt associated with the same bike racks as the u-bolt is # 915064554. The washer plate is # 853-0333-02. The wing knob is # 753-0745. The washer is # 956061259. The round nut is # 853-5439. The hex key is # 853-0930. The sliding square nut is # 853-7557. The small allen bolt is # 919-0612-54. If what you are looking for is not...
  view full answer...


• Recommended Mounting Kit to Attach Thule TH725 Ski Carrier to Nissan Pathfinder Crossbars
  
• In order to mount your Thule TH725 Ski and Snowboard Rack to the larger crossbars on your Nissan Pathfinder, you will just need the Mounting Kit # 7533998. This kit includes the clamps and bolts necessary to attach the carrier to crossbars that are up to 3-3/4 inches wide. You can use the original nuts from your carrier or they can be obtained separately with part # 853-5439. I have attached a short video demonstration on this product so you can see exactly what all is included.
  view full answer...


• What Size Crossbar Will the Replacement U-Bolt for Thule Peloton and Prologue Bike Racks Fit
  
• Replacement U-bolt # TH853-5420-02 is large enough to fit around a bar that is 1-1/4 inches wide and 7/8 inches tall. The only nut that I am sure will fit is barrel nut # 853-5439.
  view full answer...


• U-Bolt And Round Nut Replacement For Thule Roof Mounted Bike Carrier
  
• The replacement U-bolt for the Thule Prologue and Thule Peloton Bike Racks, is part # TH853-5420. This is the U-bolt that holds the bike carrier to the crossbars on your vehicle. The round nut that is used with this U-bolt is part # 853-5439. These are sold individually.
  view full answer...


• Looking for Wing Nut to Fit on Thule Replacement U-Bolt
  
• I went out to the warehouse to see if the Replacement 3-Wing Hand Knob # 753-0745 will fit on the Replacement U-Bolt # TH853-5420-02 you referenced. I was able to confirm that this wing knob will fit on the U-bolt. When used with the Thule Pelton bike rack, the U-bolt secured the rack to the front crossbar using the Round Nut # 853-5439. The back of the rack was secured to the crossbar with 2 carriage bolts # 915064554, the washer plate # 853-0333-02, and the 3-Wing Knob # 753-0745. If...
  view full answer...


• Replacement Hardware for First Generation Thule Flat Top Ski Rack 725 and Adapter for AeroBlade Bars
  
• The hardware you need for your first generation Thule Flat Top Ski Carrier (model number 725) is the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998, as you mentioned. You will also need four of the Replacement Round Nut for Thule Carriers # 853-5439. The adapter you need to attach your 725 Flat Top Ski Carrier to Thule AeroBlade crossbars is the Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for Roof-Mounted Carriers # XADAPT2.
  view full answer...

Do you have a question about this Accessories and Part?