Custom Fit 2000 GMC Sierra Accessories

Westin does have a set of similar E-Series running boards that do fit your regular cab truck with part #23-1400 but the part #23-1680 that you referenced does not fit since it's for extended cab trucks.

Usually when you replace parts that get lubricated, you clean all of the existing grease first before adding any new grease, just in case there is a compatibility issue. Since you are using Dexter axles and replacing components with Dexter parts, the…

Marlboro does not list weight capacities for either the #MA75VR or the #MA45VR that you referenced. They state it will be up to the installer to determine the appropriate weight capacity. We also do not have this in a 3 foot length.

Installing a weight distribution system with sway control, like the Reese Strait-Line Weight Distribution systems is not all that difficult. I actually feel that if you installed it yourself you would have a better working knowledge of the system and…

The Curt hitch part #13332 was designed to specifically fit your 2000 Chevy Silverado so the great news you do not need to measure anything on your truck to know it will fit. I attached a link to an install video for the hitch on a 1999 Silverado…

If your truck has a standard or step bumper bumper the Draw-Tite Hitch, part #75362, will fit just fine. If the truck has a 10 inch Deep Drop bumper, you will need to use Curt Hitch part #13339. If you are not sure which bumper you have, I have added…

We don't specify between the 1500 and 1500 HD in terms of fit in our guide, but I did check with our manufacturers for you to verify the fits for a trailer hitch receiver on your 2003 Chevy Silverado 1500 HD. The correct fit is going to depend on…

To install a brake controller in your 1998 GMC C/K series 1500, there are a couple of items you will need in addition to the brake controller. If the truck does not have a 4-Way trailer connector, you will need to add one like part #118315. The…

Yes, for Dexstar wheel 17-384 it is a 5 on 5 bolt pattern. Not very common nowadays but we do have some options. Wheel #AM20428 is a spoke wheel with the 5 on 5 bolt pattern or the mini-mod version is #AM20446DX. We have other 15 inch wheels with the…

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

First, use a circuit tester like part #PTW2993 on the black wire exiting the rear of the controller to verify that power is reaching it. If not, there is a 20- or 30-amp fuse in the power distribution box, located under the hood on the driver's…