Customers compare e99039-9 to these similar products
Products Featured in this Video
What's up, everybody It's AJ, with etrailer.com. Today we're gonna be checking out the etrailer coupler lock and hitch receiver kit. So you're gonna get this bag that comes with it, great for storing all those items and what comes in the kit, let me unzip it. Plenty of room to add more stuff in here if you want more ratchet straps or anything else you have in the back of your vehicle that you… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Those are some good questions, and we'll start with if the brake lights will flash during activation using the Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV. The answer to that is no, they will not flash when the True Course…
view full answer...Feel free to email me your pictures and measurements, I would be happy to take a look at those for you. In the mean time, since you mention that the bearings blew out, you will want to examine the spindle to make sure that it wasn't damaged. As…
view full answer...Yes, for your 2020 Jeep Grand Cherokee that isn't equipped with the factory tow package, the Tekonsha T-One Vehicle Wiring Harness #118727 will work perfectly. This custom harness is going to plug into existing ports behind the tail lights and…
view full answer...Since the Tuson Electronic Sway Control System #335TSC-1000 will activate either side of the trailer brakes as needed to stop sway and the Curt True Course #C94VV instead applies them both at the same time and does a better job sensing and stopping…
view full answer...The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…
view full answer...The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn close…
view full answer...My contact at Dexter Axle tells me that when installing a brake assembly to the backing plate of a 3500 lb axle, the bolts should be tightened in a criss-cross pattern to between 45-70 foot lbs.
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The numbers on the Hopkins Graduated RV Levels #HM08525 are just reference numbers and are not meant to indicate degrees or inches or feet. Basically it is a simple way to make sure the trailer is level on both sides. So if you are at 0 on one side…
view full answer...The Camco AccuLevel Trailer Bubble Level #CAM25563 is measured in degrees so that it will be compatible with multiple trailer sizes.
view full answer...On the Hopkins Graduated RV Levels, #HM08525, the level C is for front-to-rear level and can be installed on either side of the vehicle. The level 3 is for side-to-side level and can be installed on front or rear of the vehicle. Read both levels (C…
view full answer...While we do have the stick-on graduated levels, each of them are in the 3 to 4 inch range like you mentioned and there aren't any that are larger. So the trade off of getting something like the 10 inch Camco AccuLevel Trailer Bubble Level…
view full answer...