Master Lock Adjustable Trailer Coupler Lock - Stainless Steel

Ask the Experts about this Master Lock Trailer Coupler Locks

• Which Coupler Lock Set is Best for Use with Atwood Trailer Coupler 81911
  The Atwood Trailer Coupler 81911 that you have on your A-frame trailer can be locked in two ways, by securing the latch and by blocking entry of a hitch ball. The latch mechanism on the top can be locked with an item like the Dead Bolt # e98884. (This latch lock is one of the two locks included in part # e99039, which is our reference for the CT Johnson part RHC32.) But please note that this latch lock has a center span of only 1/2-inch; the coupler latch on your # 81911 requires a...
  view full answer...
• Coupler Lock for 2016 Airstream International
  I reviewed the specs for the Airstream International travel trailers and while they appear to have a standard latch coupler, the one I saw in photos does appear to have a curved lip which could potentially interfere with some coupler locks. No coupler dimensions are provided on the Airstream site. The lock you referenced, Atwood AMPlock Underslung Coupler Lock AT89006, will fit couplers up to 4-5/8-inches wide including the lip. Since you cannot measure your coupler you may prefer using...
  view full answer...
• Coupler Lock With 1/4 Inch Diameter Pin Recommendation
  For our hitch receivers, we offer hitch receiver locks that have either 1/2 inch or 5/8 inch diameter pins. Depending on what you intend to use the locking pin for we do have other options available. We carry locking coupler pins that may work for you. The first lock I recommend is the Master Lock Adjustable Trailer Coupler Lock, part # 2847DAT. This is a 1/4 inch diameter pin that has a keyed lock and is adjustable to fit lengths of 5/8 inch, 1 inch, and 2 inch. Another coupler lock...
  view full answer...
• Pin or Lock Recommendation for a Yoke Latch Coupler
  It sounds like you are talking about a latch pin which would go through the latch and prevent it from opening. It isn't a necessary part but usually what people do with the latch holes is use a latch lock. I recommend Master Lock Adjustable Trailer Coupler Lock - Stainless Steel Item # 2847DAT because it is adjustable to fit latches with different widths from 5/8 inch wide to 2 inch wide. The pin has a 1/4 inch diameter which is the most common latch hole size. I have linked a video review...
  view full answer...
• Recommended 3 Inch Locking Hitch Pin For Boatmate Tandem Trailer
  We do have a locking hitch pin that may work very well for you. I recommend the Trailer Coupler Lock, part # e98888. This is a 1/4 inch diameter pin that has a 3-3/8 inch span. This lock has a covered key slot that will help prevent corrosion. I have attached a product review video you can check out. The pin on the Master Lock Coupler Lock, part # 2847DAT you referenced is 4 inches long but is designed to fit latches up to 2 inches wide. It would not work in the 3 inch span you said...
  view full answer...
• Stainless Steel Trailer Coupler Lock for a Trailer Buddy XR-84 Surge Brake Actuator
  The Master Lock adjustable trailer coupler lock # 2847DAT will work with your Trailer Buddy XR-84 surge brake actuator because it has a 1/4 inch diameter pin. The Trailer Buddy can accommodate coupler locks with diameters of 1/4 and 5/16 inches. It can adjust to accommodate widths of 5/8, 1 or 2 inch couplers. It is also stainless steel per your request. Another style to consider is the trailer coupler lock that codes to early model GM keys. For example, the Bolt coupler lock # BL7025283...
  view full answer...
• Keyed-Alike Locks Similar to Master Lock Coupler Latch Lock 2847DAT
  We cannot control or select the key code for Master Lock Coupler Latch Lock # 2847DAT but we do have similar latch locks that can be ordered keyed alike although these do cost more than standard locks. Lock # e98888 has a 3-3/8-inch span and # e98886 has a 2-inch span; both can be ordered keyed alike by selecting that option before you add them to your cart. We also have BOLT brand locks that can be coded to use your vehicle's ignition key instead of their own keys. For instance, lock...
  view full answer...
• Can Master Lock Trailer Coupler Locks be Keyed Alike?
  The Master Lock Adjustable Trailer Coupler Lock - Stainless Steel # 2847DAT is not offered in a keyed alike option, so if you order 3 you will have 3 separate keys. If you want locks that are keyed alike, I recommend the etrailer.com Stainless Steel Trailer Coupler Lock - 7/8" Span # e98890 which you can select keyed alike from the drop down box after selecting your quantity desired. I've attached the link to all your keyed alike options.
  view full answer...
• Pin Style Coupler Lock Recommendation that Requires at 9/16 inch Span
  A snug fit is preferred when picking out a pin style coupler lock for a trailer coupler. If you have 9/16 of an inch from the outer edges of the latch on your coupler I wouldn't recommend going with a 1/2 inch span lock as it would be too short and wouldn't latch. Instead I would go with the Master Lock Coupler Lock part # 2847DAT as it can be adjusted down to a 5/8 inch span and would work well for you. I attached an install video for this lock for you to check out as well.
  view full answer...
• 5/8 inch Diameter Coupler Lock Recommendation
  Nearly everyone of our coupler locks have a pin diameter of 1/4 inch. The Masterlock Lock part # 2847DAT happens to be 5/8 of an inch in diameter.
  view full answer...
• What Size Coupler Latches are Compatible with the Master Lock Adjustable Trailer Coupler Lock
  The Master Lock Adjustable Trailer Coupler Lock, # 2847DAT, is designed to fit coupler latch widths from 5/8 inches up to 2 inches wide. In all likelihood, it will fit your coupler. I recommend measuring to make sure. If you get a width that is less than 2 inches and has a hole for a lock that is 1/4 inches or less in diameter, this lock will fit. I have included a link to a video review of this lock for you. I have also included a link to all of the coupler locks we carry.
  view full answer...
• What Are the Dimensions of the Master Lock Coupler Lock, Part # 2847DAT
  The pin of the Master Lock Coupler Lock, part # 2847DAT is 4 inches long. The pin has detents that allow it to fit latches up to 2 inches wide. The end cap is constructed of high impact plastic, and there is a metal button underneath that will prevent the pin from passing through the coupler latch if the plastic cap is removed.
  view full answer...
• Can Master Lock Adjustable Trailer Coupler Locks be Keyed Alike?
  Though we do have many coupler locks which can be keyed alike, unfortunately the Master Lock Adjustable Trailer Coupler Lock, # 2847DAT, is not one of them. There is an adjustable coupler lock which offers plenty of convenience in the BOLT Trailer Coupler Lock, # BL7025289. This lock can be coded to the ignition key of your 2004 Toyota Tundra so you do not have to carry any extra keys. I have added a link to a review of this lock, as well as the link to our page displaying each of our...
  view full answer...
• Availability of Coupler Locks That Are Keyed Alike
  The Master Lock Coupler Lock # 2847DAT is not offered keyed alike but other similar coupler locks can be ordered in multiples that can use the same key. The linked page displays all coupler latch locks that are available keyed alike. These are offered in various lengths, such as the 1/2-inch span # e98885 and the 7/8-inch span # e98890. Once you choose your preferred lock simply select Keyed Alike from the drop-down menu tool on that page and indicate your desired quantity.
  view full answer...
• Hitch Receiver and Coupler Trigger Lock Compatible with Toyota Factory Receiver Width
  The 2018 Toyota Tundra factory hitch is built up around the pin so it is wider than usual and will not fit the traditional 2 inch hitch pin like found in # 2848DAT. You will simply need the longer hitch pin. The Trailer Hitch Receiver Lock - Extra Long - Flush Design for 2-1/2" Trailer Hitches # RH5-XL will work well for you and give you adequate space. If you want one that codes to your truck key, you can use the Bolt Lock # BL7023584. If you want the coupler lock as well then you...
  view full answer...
• Coupler Locks for a Bulldog Style Coupler
  Yes, check out the EZ Lock Trailer Coupler Lock # BLTL-20-40D. This coupler lock is compatible with Collar-Lok Couplers and then use for a pin style lock to slide through the coupler you would want the Masterlock Trailer Coupler Lock part # 2847DAT.
  view full answer...
• Recommended Hitch for 2017 Subaru Forester XT Touring with EyeSight
  Great news! The Draw-Tite Class III # 75876 trailer hitch is a fit for all models of the 2017 Subaru Forester, this includes your XT Touring with EyeSight. I have linked an installation video of this hitch for you being installed on a similar vehicle. A great wiring harness for your 2017 Subaru Forester is the Tow Ready T-One Wiring Harness # 118467. I've linked an installation of this as well for you to check out. Other items you will need when towing a trailer is a ball mount...
  view full answer...
• Availability of Coupler Lock With a 5/16 inch Pin Diameter
  A pin with a 1/4 inch diameter, like part # e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter. If instead you meant that you needed one with a span of 5/8 of an inch then you will want to go with the Master Lock Adjustable Trailer Coupler Lock # 2847DAT which has a 5/8 inch adjustment setting. If you meant that the pin diameter needed to be 5/8 inches then you are looking for part # e98880.
  view full answer...
• Coupler Lock Recommendations for Atwood Trailer Coupler # 80051
  For trailer coupler 80051 you could use a latch lock such as # e98886 or # 2847DAT. These will install at the latch and prevent it from being able to pull up. Another popular lock for this coupler is # 379DAT. This lock has a part that fits inside the coupler where the ball normally would be. This prevents someone from coupling up to the trailer. I have linked videos for all three of the locks above.
  view full answer...
• Trailer Coupler Latch Lock with 1 Inch Pin Span
  Master Lock has an adjustable latch lock, # 2847DAT that has presets for either a 1 inch span or a 2 inch span. We also have some that are 7/8 inch spans which is 1/8 of an inch more than a 3/4. We have # e98890, # 2878DAT, and # e98889. I have linked some video reviews of these locks for you.
  view full answer...
• Trailer Coupler Lock For Pintle Hook / Hitch
  We have a few options that you may wish to consider. If you are looking for a lock for the hook or hitch alone, I would recommend our etrailer.com coupler lock, part # e98887. This lock has a 1/4 inch diameter pin that is 2-1/2 inches long and has a covered key slot that prevents corrosion. Another trailer coupler lock I would recommend would be the Master Lock Adjustable Trailer Coupler Lock, part # 2847DAT. This coupler lock has a 2 inch shaft and may provide a more snug fit for the...
  view full answer...
• Locking Titan Zinc-Plated Straight Tongue Coupler T4853100 to Hitch Ball
  Yes, to secure/lock the Titan Zinc-Plated Straight-Tongue Coupler # T4853100 to the hitch ball you can use a latch lock like the excellent Master Lock # 2847DAT. This will insert through the existing holes on the latch to prevent it from pulling up and unlocking from the ball. It features a 4-Pin tumbler lock that discourages picking and the stainless steel shank will resist any rust or corrosion. I have attached a short video demonstration that you can check out as well.
  view full answer...
• Stainless Steel Trailer Coupler Pin with 1/4 Inch Diameter
  The 1/4 inch diameter snapper pins we have are all regular steel. For a stainless steel 1/4 inch diameter pin take a look at the locking pin # 2847DAT. I have included a link to a video review for you. You will get the stainless steel construction you are after plus the added security of a lock.
  view full answer...
• Recommended Coupler Lock for Low-Profile Trigger
  For your A-frame coupler similar to the Fulton # FE443050303, I recommend the Trailer Coupler Lock - Deadbolt Style for Surge Brake with 2-1/2" Span # e98887. This lock will allow the ends of the lock to be on either side of the coupler giving you the compatibility with low profile trigger. Another option is the Master Lock Adjustable Trailer Coupler Lock - Stainless Steel # 2847DAT which will allow more of a custom fit.
  view full answer...
• Trailer Coupler Lock Recommendation for a Bulldog A-Frame Coupler # BD43805W0317
  The Fulton Gorilla Guard coupler locks, like # 63227, fit on couplers that have a lip. That is part of what holds them in place. Since the Bulldog coupler, # BD43805W0317, does not have a lip, it would require a different type of lock. A lock like # DT25013KA, would be a good choice. It fits 1-7/8 inch, 2 inch, and 2-5/16 inch couplers. Another options is a lock like # 2847DAT. This type of lock will prevent the latch from moving. I have included a video review of the lock for you.
  view full answer...
• Coupler Lock for a Rockwood Signature Ultra Lite Travel Trailer 8312SS
  I did some research on the 2013 Rockwood Signature travel trailers and it looks like the coupler is similar to a Bulldog # BD4425000317 but it was hard to tell from the pictures available on the internet. The Fastway Universal Trailer Coupler Lock, # DT25013KA, should work as long as the outside coupler width at the center of the ball is no greater than 4-1/2 inches. The sides of the Master Lock Universal Trailer Coupler Lock, # 379DAT, could interfere with the construction of the...
  view full answer...
• Coupler Lock Recommendation for use on a Coupler that has a 5 inch Wide Flange
  It looks like would need to get a latch coupler lock like a Master Lock Adjustable Trailer Coupler Lock - Stainless Steel, part # 2847DAT, for your Four Winns trailer that has a 5 inch wide flange. I attached a link to a review video of this coupler lock for you to check out. We do not have a surround coupler lock that will be wide enough to fit on a coupler that has a distance of 5 inches across.
  view full answer...
• Does 1/4 Inch Diameter Snapper Pin Come in Stainless Steel
  The 1/4 inch diameter snapper pins we carry are all regular steel. For a stainless steel 1/4 inch diameter pin I recommend locking pin # 2847DAT. I have included a link to a video review for you. You will get the stainless steel construction you are after plus the added security of a lock.
  view full answer...
• Coupler Lock Recommendation for a Bulldog Cast Coupler # BD4425000317
  I went out to the warehouse and pulled a Bulldog trailer coupler, # BD4425000317, to determine what the best lock for it would be. The best option would be a simple latch lock like # 2847DAT. This will prevent the latch from opening. I have included a link to a video review of the lock for you.
  view full answer...
• Recommended Locks for 2-5/16-Inch Squeeze-Latch Type Trailer Coupler
  To secure your squeeze-latch type coupler such as # CTA-280 you can use a latch pin lock such as # 2847DAT, a coupler lock such as # FA86-0015-312 or choose a combination kit with both, such as the Master Lock # 3784DAT. Using this Master Lock kit will give your trailer dual protection from theft by securing both the latch mechanism and the coupler head.
  view full answer...

Do you have a question about this Trailer Coupler Lock?