Truck Bed Sliding Tray

According to BedSlide the Factory Mount Installation Kit for BedSlide S and Classic #BE69WR will not work with any in bed towing packages such as 5th wheel & gooseneck towing packages. This installation kit you mentioned is actually designed to…

Hello John, There isn’t a specific weight rating listed for the Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" #LC1315411. However, most Lippert spare tire winches are rated to handle 100 lbs or more, which is more…

Hey Jerry, yes using the Air Lift kit part #AL83DQ would affect how the smart hitch and scale would function as that scale uses the suspension movement to determine how much weight is added into the bed of the truck. If the air bag kit minimizes…

Hey Mike, thanks for reaching out. The 60" x 23" dimension listed for the #MR87ZV cargo tray is the overall dimensions of the tray. The inside dimensions of the tray are 58-1/4" long x 19-7/8" wide.

The Truck Trolley Truck Bed Slide Out Tray for 8's Long Truck Beds item #TR99VR includes the Long Bed Extension Kit item #TR59VR. The Truck Trolley Truck Bed Slide Out Tray item #TR87VR is just the tray.

Hello Nelvin, thanks for reaching out, and congrats on the new truck. Between those two options I recommend the SumoSprings Rebel Custom Helper Springs #SSR-128-47-2. Those StableLoads are fine but you will see much better ride leveling with the…

Hi Adrian; the Invis-A-Rack #DZ951550 (6-1/2' bed) and #DZ951800 (8' bed) are not compatible with any available tonneau covers. There was a time where TruXedo made one for this rack but it has been discontinued for a while now. If you want to…

Hey Christian, thanks for reaching out! I have a wiring diagram for the Advent Air RV Air Conditioner #ACM150 (see attached), but I unfortunately don't have a photo of the back of the plug itself. You should still be able to follow the diagram…

Not knowing the model I can't confirm exactly what functions these pins serve for sure but I can say that on other 6-pin connectors like the one with the #ACDOM135B pin 1 is the Compressor Hot and pin 4 is the Low Fan. I've attached a diagram…

Advent Air Conditioners like part #ACM135 come with a connector that pairs up directly with the standard 6-wire connector. If you have a 9-wire connector then you need the kit #ACRG15 as well. For wiring I'm attaching some photos of diagrams for…

The Advent Air RV AC unit part #ACDOM135 is actually very similar to the Dometic Duo Therm to the point many would say it's a little too close of a copy...that said it does work really well and would be a solid option to replace your Penguin…

Hey John, you can install an AC unit like the Advent Air #ADV95SR on the roof of an enclosed car hauler like you have but you will need to do a little reinforcing of the roof and come up with some framing around the opening for the unit to install.…