Can The CargoGlide 1000 Sliding Tray for Trucks Be Used With A Gooseneck?

Question

Question:

Would this interfere with my factory installed puck system in any way if I chose to remove just the tray. So I could use my gooseneck if I needed to without removing the entire thing. I have a 2022 f350 kingranch with a long bed.

asked by: Russell

1

Helpful Expert Reply:

According to BedSlide the Factory Mount Installation Kit for BedSlide S and Classic # BE69WR will not work with any in bed towing packages such as 5th wheel & gooseneck towing packages.

This installation kit you mentioned is actually designed to work with the 2015-2016 Ford F-150's and will not work with your 2022 Ford F-350.

Instead, you'd need to use something like the CargoGlide 1000 Sliding Tray for Trucks - Regular Duty # CG1000-9548.

This sliding tray has a maximum weight capacity of 1,000-lbs, measures 95" long, 50" wide, and has 48" of total usable width.

Attached is a product review video for you to check out as well.

expert reply by: Bryce D

1

Answer 1

Hi Brandon! We have several power retractable bed covers for your 2024 Ford F350 with an 8' bed, though no Retrax options (they don't have one for an 8' bed for some reason). All of them are from Pace Edwards and I recommend the…

view full answer...

Answer 2

Hello Al, thanks for reaching out. Both of the tonneau covers you mentioned, the Pace Edwards UltraGroove #311-KMD7936 and the RetraxPRO XR #RTT-80233 are a fit for your 2026 Ram 3500 with the 8' bed. There are a few noteworthy differences…

view full answer...

Answer 3

Hey Mark, there isn't a way to use a Bedslide with a gooseneck but I was able to find that there is a way to use a CargoGlide with one if you use the part #CGGN-1 which is something that has to be special ordered from them. At this time we…

view full answer...

Answer 4

Hey Lorie, the first thing you need is a BedSlide confirmed to fit your 2021 Chevy Silverado 2500 6-3/4 foot bed like the #BE75ER. Then for everything else you'd want the Complete BedBin kit part #BE94WR. I attached a picture of everything that…

view full answer...

Answer 5

Hello again Steven. The Camper Packer #TLA7010 is meant to support the camper under the main floor/frame structure, not out at the edges. You’ll use 2 stands, one toward the front and one toward the rear. We don’t have a specific placement for a…

view full answer...

Answer 6

Hey Scott, the correct factory mount install kit for a BedSlide for a 2026 GMC Sierra 3500 would be the part #BE45UV. Do you have a BedSlide already?

view full answer...

Answer 7

That's a great question, Garland. The space between the floor of your cargo area and the bottom of the MORryde RV Cargo Slide Tray #MR82FR is about 1.6". If your door lip is taller than that, you’ll want to add the Height Adjustment Kit…

view full answer...

Answer 8

Hey Walter, you are absolutely doing the right thing replacing your tires at 5 years as generally the lifespan of a trailer tire is 4-6 years. So what I would go with is the Provider HD part #TTWPRG235R16 instead as this is a Load Range of G like you…

view full answer...

Answer 9

Yes, the Camper Hold Down Zinc Coated Finish #HSBP would work just fine on your 2014 Ford F-150. The only F-150s that Brophy says these won't fit are the 2004-2008 models. I attached a picture that shows what they will look like installed. For…

view full answer...

Answer 10

Hey Jeff, thanks for reaching out. The Replacement Wet Shoulder Bolt #MR52HR comes with just the bolt. The nuts are sold separately but we do have those available. For that bolt you'll need the following: - Replacement Grade 5 Flange Lock Nut for…

view full answer...

Answer 11

The main difference between the Demco Tabless Base Plate Kit #DM77YV and the Roadmaster Direct-Connect Base Plate Kit #RM97RR is just going to be the brand really. They're both very similar in the way they install, with Roadmaster being a bit…

view full answer...

Answer 12

Hey Matt, no, the ride quality of an unloaded vehicle with an Air Lift 1000 Air Suspension Kit #AL42WQ is not affected when 5–10 lbs of air is in the bags. The Air Lift 1000 bags firm up the rear coil springs to prevent sagging and bottoming out,…

view full answer...

Can The CargoGlide 1000 Sliding Tray for Trucks Be Used With A Gooseneck?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching