2006 Ford Ranger Truck Topper

For your 2006 Chevy Silverado 1500 with a 6-1/2 foot bed you'd want the Bestop Supertop part #B76303 which is a confirmed fit. The part you referenced is actually just a tinted window kit. The #B76303 comes with windows that are tinted to 31…

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

Good afternoon Nathan, that's a great question! You can use the etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV with a 3" to 2" reducer adapter like Buyers Products 3" to 2" Receiver Tube Adapter…

The Bestop Supertop for Truck 2 Collapsible Bed Cover #BE29UR weighs 78 lbs.

Hey Denise, the Replacement Cover for Extang Classic Platinum #EX6790 is not going to work with your 2002 Dodge Ram 1500. You'd need to use the Replacement Extang Classic Platinum Tonneau Cover #EX6770 instead. If there is anything else I can do…

Hey Elisabeth, thanks for reaching out! What you're needing are the Replacement Side Straps #TH99UK, which replaces the straps on the Thule Tepui Explorer Kukenam 3 person rooftop tents 901300 and 901301. Is there anything else you need to get…

Hey Tony, The etrailer Hard Tonneau Cover #e55DR does not come with a built in lock, but if you lock the tailgate of your truck then no would would be able to open the cover without damaging it or the tailgate.

It looks like you ordered both from us today to use with your Carrier lower vent assembly. The heat strip will work with the Advent but if I am being perfectly honest a lot of times these mixed brand AC Unit solutions don't work as consistently…

Hi Alan; as long as you don't have the factory OEM wheel liners you can use the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set #WT66MV on your 2025 Sierra 1500 Denali Ultimate.

The Replacement 7 Quart Vertical Pump Assembly #LC251910 is the Lippert part number 731445 you mentioned needing. The 251910 was the old part number which was replaced by the current 731445 number you found.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Tanner; that is 100% correct. You can replace what you have now with the B&W Continuum Weight Distribution Head Assembly - 2-1/2" Shank #BW68FR if you do not want to use an adapter sleeve on your hitch. It would be great if you could just…